Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 29 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Complete CURT Class 3 2" trailer hitch and 5-flat wiring kit (with 4-way to 5-way adapter for surge brakes) engineered for the 2000 Toyota Tundra #13180 will not fit with towable bumper mount. Vehicle-specific fit, plug-and-play installation, all hardware and instructions included.
This custom kit fits the following vehicles:
All Hardware and Installation Instructions Included!
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tundra (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Toyota Tundra (to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2000 | Toyota Tundra | #13180 will not fit with towable bumper mount |
Yes, the Curt 13180 (also known as 78198 or RRH13180) is designed for 00-06 Toyota Tundra Pickup models. However, it does not fit towable bumper models, so confirm your truck does not have a towable bumper before purchasing.
No. The Curt 13180 explicitly excludes towable bumper models. If your Tundra has a towable bumper, this hitch is not compatible.
The manual lists gross load capacity specifications for both weight-carrying and weight-distribution modes, but the specific values are not filled in on the document provided. Contact Curt Manufacturing or check the product specification sheet for exact towing and tongue weight capacities. Always verify that the hitch capacity does not exceed your vehicle manufacturer's recommended towing capacity.
No. The manual explicitly states "NO DRILLING REQUIRED." The hitch uses existing weldnuts on the frame rail and cross member, and existing weldnuts on the bumper.
The kit includes: 2× M12×1.25 40mm hex head cap screws (HHCS), 2× 1/2-13 UNC 2" carriage bolts, 2× 1/2-13 UNC 2.5" hex head cap screws, 4× 1/2-13 UNC serrated flange nuts, 4× 1/2" flat washers, 2× 1/2" lock washers, and 2× 0.250×1.50×2.00" square hole spacers.
You will need a torque wrench capable of tightening to 110 lb-ft, and standard hand tools (wrenches or sockets) to install and hand-tighten the bolts. The manual does not specify additional tools required.
1. Remove two fascia cups from the bumper and return them to the owner. 2. Raise the hitch into position. 3. Install the 2× M12×1.25 40mm bolts and hand-tighten. 4. Install the 2× 1/2" hex bolts with washers into the bumper and tighten. 5. Install the 2× 1/2" carriage bolts with square hole spacers and hex flange nuts. 6. Torque all fasteners to 110 lb-ft.
All fasteners must be torqued to 110 lb-ft. This applies to the M12×1.25 bolts, the 1/2" hex bolts, and the 1/2" carriage bolts with flange nuts.
Yes. The manual instructs you to hand-tighten the 2× M12×1.25 bolts in step 3, then tighten the 1/2" hex bolts in step 4, and install the carriage bolts in step 5. All fasteners are then torqued to 110 lb-ft in step 6.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a maintenance interval or retorque schedule.
Do not exceed your vehicle manufacturer's recommended towing capacity. The Curt 13180 has specified gross load capacities for weight-carrying and weight-distribution modes, but the exact values are not provided in this manual. Contact Curt Manufacturing or your vehicle dealer for the specific capacity limits.
Yes, the Curt 13180 fits 00-06 Toyota Tundra Pickup models, excluding towable bumper versions.
No. The manual states "NO DRILLING REQUIRED." The hitch uses existing weldnuts on the frame and bumper.
Torque all fasteners to 110 lb-ft.
A torque wrench (to 110 lb-ft) and standard hand tools for bolt installation.
Yes, Curt part number 55367 is designed for the Toyota Tundra. However, the manual does not specify model year range, cab style, bed length or drivetrain compatibility. Verify with the manufacturer or retailer that this part fits your specific Tundra configuration before purchase.
Curt part number 55367 is a T-connector harness for the Toyota Tundra. It connects to the vehicle's factory tow harness and includes a 4-flat connector, power wire with ring terminal, 10 AMP fuse, fuse holder, and cable ties.
The harness includes: a T-connector with 4-flat connector, power wire with ring terminal for battery connection, 10 AMP fuse, fuse holder, and cable ties for securing loose wires.
The manual refers to the factory tow harness as T4 but does not provide its specific location on the Tundra. Consult your vehicle's owner manual or contact a Toyota dealer for the exact location.
1. Locate the vehicle's factory tow harness (T4). 2. Remove the protective cap carefully without damaging the locking tabs. 3. Insert the T-connector harness connector into the vehicle's tow harness connector. 4. Ensure the connectors are fully inserted with locking tabs in place.
Route the 4-flat connector to the center of the vehicle and secure it in a convenient location that is out of the way. Secure any loose wires with the cable ties provided.
1. Locate the vehicle's positive battery terminal in the driver side of the engine compartment. 2. Connect the ring terminal on the power wire to the positive battery terminal. 3. Locate the vehicle's power wire connector in the engine compartment—it will have connection points matching the harness connector. 4. Insert the connector fully with locking tabs in place.
The Curt 55367 uses a 10 AMP fuse. Insert it into the fuse holder included with the harness.
Secure all loose wires with the cable ties provided. Ensure wires are routed away from areas where they may be cut or pinched by moving parts or sharp edges.
Do not damage the locking tabs when removing the protective cap from the factory tow harness connector. Avoid routing wires through areas where they may be cut or pinched by moving parts or sharp edges.
Yes, the Curt 55367 is designed for the Toyota Tundra. Verify your specific model year, cab style and bed length with the manufacturer before purchase.
The manual does not mention drilling. The installation appears to use the factory tow harness connector and battery terminal without modification.
A 10 AMP fuse is required. It is inserted into the fuse holder included with the harness.
Yes. Do not damage the locking tabs when removing the protective cap. Handle the connector carefully to avoid breaking the tabs.
No reviews have been added for this product.