Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Receiver Tube Size | 1-1/4 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 3,500 LB |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2000 - 2004 | Subaru Outback | Sedan |
Yes, the 00 - 04 Subaru Outback Sedan 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA2307 (Part #HWA2307) is designed to fit the 2000-2004 Subaru Outback.
The 00 - 04 Subaru Outback Sedan 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA2307 (Part #HWA2307) fits 2000-2004 Subaru Outback models. The 2004 model year is the last year covered by this part number. For newer models, check for an updated version.
The 00 - 04 Subaru Outback Sedan 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA2307 (Part #HWA2307) fits the following vehicles: 2000-2004 Subaru Outback. Always verify your specific year, make, and model before ordering.
The 00 - 04 Subaru Outback Sedan 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA2307 (Part #HWA2307) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Part number 12270 is designed for 1990–2004 Subaru Legacy Sedan and 1995–2004 Outback models. If your vehicle is outside these model years or is a different body style, this hitch is not compatible. Verify your vehicle's year and model before purchasing.
The manual lists a gross load capacity when used as a weight-carrying hitch, but the specific weight values are not printed in this version of the manual. Contact Curt Manufacturing technical support at 1-877-287-8634 for the exact trailer weight and tongue weight ratings, and always verify that your vehicle's towing capacity is not exceeded.
The Curt 12270 is designed for use with ball mount number D-19 / 45519. Use only this compatible ball mount to ensure proper fitment and safety.
The kit includes: 4× 1/2-13 UNC Grade 8 serrated flange nuts (part 20-00062); 2× 1/2-13 UNC 1-3/4" Grade 8 carriage bolts (part 10-10272); 2× 0.250 × 1.00 × 3.00" square hole spacers (part CM-SP6); 2× 1/2-13 UNC 2" Grade 8 hex cap screws (part 10-10286); 4× 0.250 × 1.38 × 1.50" round hole spacers (part CM-SP25); and 1× 1/2" fishwire (part 1_2 FISHWIRE).
Yes, you must lower the vapor canister (the black plastic box attached to the passenger side frame rail) to make room for hitch installation. However, it is not necessary to disconnect the vapor hoses—simply lower it and reattach it after the hitch is secured. This is a temporary repositioning, not a permanent removal.
You must remove the rearmost exhaust hanger and move the muffler to one side to allow clearance for hitch installation. The exhaust system itself is not removed, only repositioned. After installation is complete, reattach the exhaust hanger.
No drilling is required. The hitch uses existing frame holes and factory tie-down loops on your Subaru Legacy or Outback.
The fishwire technique is used to insert the carriage bolts into the frame rails from underneath. You reverse the 1/2-13 × 1-3/4" carriage bolts and CM-SP6 spacer into the frame rails through the access holes at the bottom of the frame. The manual references a 'Reverse Pull Fishwire Technique' diagram for detailed visual guidance on this procedure.
When raising the hitch into position, the driver side plate must be on the outside of the tow loop, and the passenger side plate must be on the inside of the tow loop. This orientation is critical for proper alignment with the factory tow loop holes.
Two fastening points are used: (1) the carriage bolts (part 10-10272) with CM-SP6 spacers, secured with 1/2" flange nuts to the frame rails; and (2) the 1/2-13 × 2" hex bolts (part 10-10286) with CM-SP25 spacers, secured through the side plates into the factory tow loop holes with 1/2" flange nuts.
All 1/2" hardware must be torqued to 110 ft-lbs. This applies to the flange nuts on the carriage bolts, the hex bolts, and all other 1/2" fasteners used in the installation.
Non-trailer loads (such as cargo carriers or bike racks) may be used, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. Always follow the load manufacturer's instructions and do not exceed the hitch's weight capacity.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch has its own load rating, but your Subaru Legacy or Outback has a maximum towing capacity set by Subaru. You must respect whichever limit is lower. Consult your vehicle's owner's manual for the exact towing capacity.
Periodically check the hitch to ensure that all fasteners are tight and that all structural components are sound. This is especially important before towing. Loose fasteners can compromise safety and may void the warranty.
The Curt 12270 is designed for 1990–2004 Subaru Legacy Sedan and 1995–2004 Outback models only. Verify your vehicle's year and model before purchasing.
No. The hitch uses existing frame holes and factory tie-down loops—no drilling is required.
You must lower (not disconnect) the vapor canister and remove the rearmost exhaust hanger to reposition the muffler. Both are reattached after installation. The vapor hoses do not need to be disconnected.
All 1/2" hardware must be torqued to 110 ft-lbs.
Do not exceed your vehicle manufacturer's recommended towing capacity. Non-trailer loads must be supported by auxiliary stabilizing straps, or the warranty is voided.
The Curt 12270 is designed for ball mount number D-19 / 45519.
On Sale Today
Original price was $539.80. Current price is $515.98.You save $23.82
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 18 - Fri, Aug 21
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.