Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Receiver Tube Size | 1-1/4 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 3,500 LB |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2000 - 2005 | Pontiac Bonneville | Excluding SLE |
Yes, the 00 - 05 Pontiac Bonneville Excluding SLE 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA2118 (Part #HWA2118) is designed to fit the 2000-2005 Pontiac Bonneville.
The 00 - 05 Pontiac Bonneville Excluding SLE 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA2118 (Part #HWA2118) fits 2000-2005 Pontiac Bonneville models. The 2005 model year is the last year covered by this part number. For newer models, check for an updated version.
The 00 - 05 Pontiac Bonneville Excluding SLE 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA2118 (Part #HWA2118) fits the following vehicles: 2000-2005 Pontiac Bonneville. Always verify your specific year, make, and model before ordering.
The 00 - 05 Pontiac Bonneville Excluding SLE 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA2118 (Part #HWA2118) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Part number 12044 is designed for 00-05 Buick LeSabre (all models), 06-current Buick Lucerne, 00-05 Pontiac Bonneville (all except SLE), and 00-03 Oldsmobile Aurora. Verify your vehicle year and model match these applications before purchasing.
The manual lists a gross load capacity for trailer weight and tongue weight, but the specific values are not printed in this version of the installation guide. Contact Curt Manufacturing technical support at 1-877-287-8634 for the exact capacity ratings. Do not exceed your vehicle manufacturer's recommended towing capacity.
You will need: a drill with a 17/32" drill bit, 17mm socket, 9/16" socket, 3/4" socket, 10" extension, ratchet, and torque wrench. These tools are required for drilling mounting holes, installing fasteners, and achieving proper torque specifications.
The kit includes: 2× 1/2-13 UNC carriage bolts (1-3/4"), 2× 0.250" × 1.00" × 3.00" spacers, 2× 1/2-13 UNC serrated flange nuts, 1× 1/2" fishwire, 2× 3/8" S-con washers, 2× M10×1.5 hex cap screws (45mm), 2× 3/8-16 UNC serrated flange nuts, 2× 3/8-16 UNC carriage bolts (2"), and 2× 0.250" exhaust hanger brackets.
Yes. Step 1 requires removing the exhaust hanger bracket from the bottom of the frame rail and disconnecting the rubber hanger attached to the exhaust tail pipe. A replacement bracket is provided in the kit and will be installed during the hitch installation. Return the factory exhaust brackets to the vehicle owner.
Yes, drilling is required. You must drill two 17/32" holes in the frame rail using the hitch as a template. A 17/32" drill bit is included in the required tools. The hitch is temporarily attached with hex bolts before drilling to ensure proper hole placement.
Possibly. Step 2 states that when lifting the hitch into position, you may need to bend or cut the heat shield to allow for hitch clearance. If your vehicle is equipped with a heat shield, remove the rearmost fastener securing it to the frame rail and discard it, then trim the heat shield as needed.
Only if your vehicle is equipped with automatic load leveling control. If present, remove the rearmost fastener securing the load leveling control housing to the frame rail and discard it, then trim the housing as needed to allow hitch clearance.
The fishwire technique is used to route carriage bolts and spacers through frame access holes after the hitch is lowered into position. The 1/2" fishwire included in the kit is threaded through the access holes to guide the fasteners into place. Refer to the Fishwire Technique Diagram in the manual for the detailed procedure.
In Step 4, slide the rubber hanger onto the 3/8" carriage bolt and secure it with a flanged hex nut. Tighten the nut against the rubber hanger allowing the hanger to rotate. Do not over-tighten, as this can damage the rubber isolator. The hanger should move freely.
Torque all M10 fasteners to 45 ft.-lbs. Torque all 1/2" fasteners to 110 ft.-lbs. Use a torque wrench to achieve these specifications. These values must be followed to ensure proper hitch performance and safety.
Do not exceed your vehicle manufacturer's recommended towing capacity. Additionally, all non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. Regular inspection helps maintain safety and performance. No specific retorque interval is stated in the manual.
The Curt 12044 is designed for use with ball mount part number D-20 / 45520. Verify compatibility with your intended ball mount before purchase.
Yes, the 12044 fits 00-05 Buick LeSabre (all models) and 06-current Buick Lucerne. Verify your exact year and model before purchasing.
Yes. You must drill two 17/32" holes in the frame rail using the hitch as a template. A 17/32" drill bit is required.
You will need a drill with 17/32" bit, 17mm/9/16"/3/4" sockets, 10" extension, ratchet, and torque wrench.
Torque M10 fasteners to 45 ft.-lbs. and 1/2" fasteners to 110 ft.-lbs.
Yes. Remove the factory exhaust hanger bracket and rubber hanger from the frame rail. A replacement bracket is provided in the kit.
Do not exceed your vehicle manufacturer's towing capacity. All non-trailer loads must be supported by auxiliary stabilizing straps, or the warranty is voided.
On Sale Today
Original price was $508.80. Current price is $493.12.You save $15.68
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Aug 12 - Sat, Aug 15
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.