Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1981 - 2011 Lincoln Town Car
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 1981-2011 Lincoln Town Car All
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Ford Country Squire, Ford Crown Victoria, Lincoln Mark VI, Lincoln Town Car, Mercury Colony Park, Mercury Grand Marquis and Mercury Marauder (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45522, installation hardware, pin & clip
1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Lincoln Town Car All Class 2 Trailer Hitch, 1-1/4" Ball Mount, Select Ford, Lincoln, Mercury Vehicles
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1981 - 2011 | Lincoln Town Car | — |
The 1981-2011 Lincoln Town Car All Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121303-004) fits 1981-2011 Lincoln Town Car models. The 2011 model year is the last year covered by this part number. For newer models, check for an updated version.
The 1981-2011 Lincoln Town Car All Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121303-004) fits the following vehicles: 1981-2011 Lincoln Town Car. Always verify your specific year, make, and model before ordering.
Yes, the 1981-2011 Lincoln Town Car All Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121303-004) is designed to fit the 1981-2011 Lincoln Town Car.
The 1981-2011 Lincoln Town Car All Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121303-004) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt hitch 12130 is designed for Lincoln Town Car models from 1980 to 2009. However, if your vehicle is a 1984 or later Town Car, the installation requires two spacer blocks at the mounting locations near the bumper and one spacer block at the forward mounting locations to properly level the hitch assembly.
Yes, Curt hitch 12130 fits Ford Crown Victoria wagons from 1979 to 2009. Wagon applications require the use of the provided wedge block spacer at the designated location to properly level the hitch assembly during installation.
Yes, Curt hitch 12130 fits 2003 and later Lincoln Town Car models. However, 2003 and later Town Cars require two additional steps: the external dress panel beneath the vehicle must be removed for installation and then returned to the vehicle owner, and the passenger side exhaust hanger bracket must be relocated. The exhaust hanger bracket is removed from the vehicle frame and rubber mount, rotated, and reattached to the hanger bracket, then attached to the hitch mounting plate.
Curt hitch 12130 is designed for use with Ball Mount D-221 / 36063.
The gross load capacity when used as a weight carrying hitch is 3,500 lbs. trailer weight and 350 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
The hitch includes: 10 spacers (0.250 x 1.50 x 2.00" square hole, part CM-SP1), 4 carriage bolts (1/2 - 13 x 2.25"), 4 hex flange nuts (HFN 1213), 2 wedge spacers (1/2", part CM-SP38), 1 hex flange nut (5/16-18), 4 washers (5/16"), 1 hex bolt (5/16-18 x 1.25 LG.), and 1 fishwire (1/2").
For most vehicles, you only need to remove undercoating from the frame at the hitch mounting location. However, if you have a 1995 or 2003+ Lincoln Town Car, the external dress panel beneath the vehicle must be removed for hitch installation and then returned to the vehicle owner after installation is complete.
Yes, drilling is required. You will use the hitch as a template to drill four holes in the frame rails. The holes required near the bumper should be drilled as close to the center of the vehicle as possible. The hitch should be positioned so that the mounting plates are approximately 1" from the end of the frame.
Install spacers between the vehicle frame and hitch as needed to level the hitch assembly. Wagon applications require the use of the provided wedge block spacer. For 1984 and later Lincoln Town Cars, use two spacer blocks at the mounting locations near the bumper and one spacer block at the forward mounting locations.
Torque all 1/2" hardware to 110 lb-ft.
Yes. On 2003 and later Lincoln Town Cars, the passenger side exhaust hanger bracket must be removed from the vehicle frame and rubber mount. The rubber exhaust mount on the hanger should be reversed and the hanger rotated, then reattached to the hanger bracket. The hanger assembly is then attached to the hitch mounting plate using the hardware provided. Use washers as needed to level the exhaust hanger on the mounting plate.
Remove all but a thin film of undercoating from the frame at the hitch mounting location. The attaching surfaces must be free of weld spatter and other objects that could prevent the hitch from being mounted flat to the frame.
Do not exceed your vehicle manufacturer's recommended towing capacity. Although Curt hitch 12130 has a gross load capacity of 3,500 lbs. trailer weight and 350 lbs. tongue weight, your vehicle's manufacturer may specify a lower limit, and you must follow the vehicle manufacturer's recommendation.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This maintenance is important for safe operation.
Curt 12130 fits 1979–2009 Ford Crown Victoria, Country Squire, Lincoln Town Car, Mercury Grand Marquis, and related models. Check the full application list for your specific year and body style.
3,500 lbs. trailer weight and 350 lbs. tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
Yes, you will drill four holes in the frame rails using the hitch as a template.
Torque all 1/2" hardware to 110 lb-ft.
Use Ball Mount D-221 / 36063.
Remove undercoating from the frame at the mounting location. On 1995 and 2003+ Lincoln Town Cars, the external dress panel must also be removed and returned after installation.
On Sale Today
Original price was $472.85. Current price is $450.64.You save $22.21 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.