Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 1988-1994 Lincoln Continental All, Except with Dual Exhaust
Whatever the next checkpoint is on your adventure -- whether it's getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Ford Taurus, Lincoln Continental and Mercury Sable (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 300 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4" receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid A-coat and black powder coat, giving them long-lasting rust and wear resistance.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
1988, 1989, 1990, 1991, 1992, 1993, 1994 Lincoln Continental All, Except with Dual Exhaust Class 2 Hitch, 1-1/4", Select Ford Taurus, Lincoln Continental, Mercury Sable
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1988 - 1994 | Lincoln Continental | All, Except with Dual Exhaust |
The 1988-1994 Lincoln Continental All, Except with Dual Exhaust Class 2 Hitch, 1-1/4" (Part #CHD-12232-002) fits 1988-1994 Lincoln Continental models. The 1994 model year is the last year covered by this part number. For newer models, check for an updated version.
The 1988-1994 Lincoln Continental All, Except with Dual Exhaust Class 2 Hitch, 1-1/4" (Part #CHD-12232-002) fits the following vehicles: 1988-1994 Lincoln Continental. Always verify your specific year, make, and model before ordering.
Yes, the 1988-1994 Lincoln Continental All, Except with Dual Exhaust Class 2 Hitch, 1-1/4" (Part #CHD-12232-002) is designed to fit the 1988-1994 Lincoln Continental.
The 1988-1994 Lincoln Continental All, Except with Dual Exhaust Class 2 Hitch, 1-1/4" (Part #CHD-12232-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Curt part number 12232 is designed for 86–07 Ford Taurus, 86–07 Mercury Sable, and 88–94 Lincoln Continental. If your vehicle is one of these models and year range, it will fit. For vehicles outside this range, this hitch is not compatible.
Ballmount D-221 / 45522 is designed for use with the Curt 12232 hitch. You must use this ballmount or a compatible equivalent for proper operation.
The kit includes: 2× handle nuts (1/2–13 UNC, grade 8, part 20-00174); 2× hex cap screws (1/2–13 UNC, 1-3/4", grade 8, part 10-10370); 2× 1/2" conical washers (part 30-00149); 2× square hole spacers 0.250 × 1.00 × 2.00" (part CM-SP12); 2× 7/16" conical washers (part 30-00163); and 2× M10×1.5 hex cap screws, 45 mm, class 10.9 (part 10-10414).
Yes, the carbon canister must be lowered during installation. Remove the two bolts on the spare tire well and two nuts near the center of the canister. The canister cannot be completely removed but must be lowered to allow hitch installation. Note: some vehicles may not be equipped with a carbon canister.
Disconnect the electrical connectors from the carbon canister. Also disconnect the hose by pinching the release button on the collar and pulling the hose off. These must be reconnected after installation.
The manual does not specify whether the battery must be disconnected. Contact Curt Manufacturing technical support at 1-877-287-8634 for guidance on this.
Drilling may be required on some models. The manual states 'DRILLING MAY BE REQUIRED ON SOME MODELS' but does not specify which vehicle models require drilling. Consult the installation notes or contact Curt technical support at 1-877-287-8634 to determine if your specific vehicle requires drilling.
1. Remove tie downs and return to owner. 2. Detach rubber isolator from exhaust hanger bracket and disconnect electrical connectors and hose from carbon canister. 3. Lower carbon canister by removing bolts and nuts. 4. Remove inboard E.A. bolts from frame end caps and discard. 5. Position hitch and attach to E.A. units with M10 bolts; insert support blocks and handle nuts through frame access slots and fasten mounting arms to frame using 1/2" hex bolts and conical washers. 6. Torque fasteners. 7. Reattach isolator, reconnect hose, and reinstall canister hardware.
Position the hitch on the vehicle and attach it to the inboard side of the E.A. units using the M10 bolts provided. Insert a support block and handle nut through each frame access slot and fasten the hitch mounting arms to the vehicle frame using 1/2" hex bolts and conical washers. Drill mounting holes if needed.
Torque all M10 fasteners to 45 LB/FT.
Torque all 1/2" fasteners to 110 LB/FT.
The manual does not provide the gross load capacity, trailer weight capacity, or tongue weight capacity. These values are blank in the parts list. Contact Curt Manufacturing at 1-877-287-8634 or consult your vehicle's owner manual for towing capacity information. Do not exceed your vehicle manufacturer's recommended towing capacity.
Non-trailer loads can be applied to this hitch only if they are supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This maintenance is essential for safe operation.
The manual indicates that exhaust lowering may be necessary on some models. The installation notes list 'LOWER EXHAUST' as a potential requirement. Contact Curt technical support at 1-877-287-8634 to determine if your specific vehicle requires exhaust lowering.
Pass the canister hose through the access hole in the hitch mounting plate and reconnect the hose. Slide the canister back into position and reinstall the hardware (bolts and nuts) that were removed during step 3.
Remove the tie downs if present and return them to the vehicle owner.
Remove the inboard E.A. bolts from the frame end caps and discard them. Do not reuse these bolts.
The Curt 12232 is designed for 86–07 Ford Taurus, 86–07 Mercury Sable, and 88–94 Lincoln Continental.
Drilling may be required on some models. Check with Curt technical support at 1-877-287-8634 to confirm whether your specific vehicle requires drilling.
Torque M10 fasteners to 45 LB/FT and 1/2" fasteners to 110 LB/FT.
Curt Manufacturing warrants the product to be free of defects in material and workmanship at retail purchase. Warranty is voided by alteration, misuse, or improper installation. Non-trailer loads must be supported by auxiliary stabilizing straps or warranty is void.
On Sale Today
Original price was $507.85. Current price is $485.46.You save $22.39
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.