1996-2000 Plymouth Voyager All Class 2 Hitch, 1-1/4" MountCURTOriginal price was $452.85. Current price is $423.05.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1996 - 2000 Plymouth Voyager
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 1996-2000 Plymouth Voyager All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chrysler Town & Country, Chrysler Voyager, Dodge Caravan, Dodge Grand Caravan and Plymouth Voyager, excluding Stow 'n Go (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
1996, 1997, 1998, 1999, 2000 Plymouth Voyager All Class 3 Hitch, 2", Select Chrysler, Dodge, Plymouth Minivans (Except Stow 'N Go)
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1996 - 2000 | Plymouth Voyager | — |
Part number 13362 is designed for 96-07 Chrysler Town & Country Van, 96-04 Plymouth Voyager Van, and 96-07 Dodge Caravan. It does not fit Stow & Go or Sport Caravan models. Verify your vehicle year, make, model and trim before purchasing.
The manual specifies gross load capacity ratings for both weight-carrying and weight-distribution modes, but the specific values are not printed in this copy. Contact Curt Manufacturing or your dealer with part number 13362 to obtain the exact trailer weight and tongue weight capacities. Always verify that your vehicle's towing capacity does not exceed the vehicle manufacturer's recommended limit.
The kit includes: four 1/2-13 UNC carriage bolts (1-1/2" long, Grade 8), four 0.250 x 1.00 x 2.00" square hole spacers, four 1/2-13 UNC serrated flange nuts (Grade 8), two 1/2" conical lockwashers, two M12x1.75 hex cap screws (35mm, Class 10.9), and two 1/2" fishwire tools.
A 9/16" drill bit is required if any mounting holes need to be drilled. The fishwire tools are provided in the kit to help route the carriage bolts and spacers through the frame access slot. You will need a wrench or socket set to torque the fasteners to specification (1/2" hardware to 110 lb/ft, M12 hardware to 79 lb/ft).
Drilling may be required. The hitch requires three mounting holes per side on the frame. If one or more holes are not already present, they must be drilled using a 9/16" drill bit. Use the hitch as a template to mark the hole locations before drilling.
1. Remove the rearmost bumper bracket bolt from the underside of the frame on both sides. 2. Locate the three mounting hole locations per side; drill any missing holes with a 9/16" bit. 3. Use the provided fishwire tool to insert carriage bolts and spacers through the frame access slot and out the mounting holes. 4. Raise the hitch into position and attach it to the frame using 1/2" flange nuts. 5. Install the M12 hex bolt and 1/2" conical lockwasher through the hitch into the bumper bracket. 6. Torque 1/2" hardware to 110 lb/ft and M12 hardware to 79 lb/ft.
If the frame access slot is not available, you may enlarge the square hole in the frame, or fish the hardware through the end of the vehicle frame behind the bumper. Note that there is a flexible plastic flap that the hardware must pass by during installation.
Torque the 1/2" hardware (carriage bolts and flange nuts) to 110 lb/ft. Torque the M12 hex bolt and conical lockwasher to 79 lb/ft.
Periodically check the hitch to ensure that all fasteners are tight and that all structural components are sound. This ongoing inspection helps maintain safe towing operation.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch has its own load ratings, but your vehicle's capacity is the limiting factor. Consult your vehicle's owner manual for the maximum towing weight.
Yes, if it is a 96-07 Dodge Caravan. It does not fit Stow & Go or Sport models.
Possibly. The hitch requires three mounting holes per side. If any are missing, drill them with a 9/16" bit using the hitch as a template.
A 9/16" drill bit (if drilling is needed), a wrench or socket set for torquing fasteners, and the fishwire tools provided in the kit.
Torque 1/2" hardware to 110 lb/ft and M12 hardware to 79 lb/ft.
No. Do not exceed your vehicle manufacturer's recommended towing capacity, even if the hitch is rated higher.
Periodically check all fasteners are tight and structural components are sound.
No reviews have been added for this product.
On Sale Today
Original price was $429.85. Current price is $320.71.You save $109.14 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 8 - Tue, Aug 11
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout