Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1997 - 2005 Buick Park Avenue
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 1997-2005 Buick Park Avenue All
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Buick Park Avenue (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45522, installation hardware, pin & clip
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Buick Park Avenue All Class 2 Trailer Hitch, 1-1/4" Ball Mount, Select Buick Park Avenue
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1997 - 2005 | Buick Park Avenue | — |
The 1997-2005 Buick Park Avenue All Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121573-001) fits 1997-2005 Buick Park Avenue models. The 2005 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 1997-2005 Buick Park Avenue All Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121573-001) is designed to fit the 1997-2005 Buick Park Avenue.
The 1997-2005 Buick Park Avenue All Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121573-001) fits the following vehicles: 1997-2005 Buick Park Avenue. Always verify your specific year, make, and model before ordering.
The 1997-2005 Buick Park Avenue All Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121573-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 12157 is designed for 1997-2004 Buick Park Avenue models. The hitch is designed for use with ball mount D-221 / 45522.
The manual lists a gross load capacity for trailer weight and tongue weight, but the specific values are not filled in on this copy of the manual. Contact Curt Manufacturing technical support at 1-800-798-0813 for the exact capacity specifications.
The hitch weight is not specified in this manual. Contact Curt Manufacturing technical support at 1-800-798-0813 for this information.
The kit includes: 2× .250 x 1.00 x 3.00" square hole spacers (CM-SP6), 4× 1/2" nylon flat washers (30-00154), 1× M10x1.5 45mm hex head cap screw (10-10414), 2× .375 x 1.25 x 2.50" square hole spacers (CM-SP9), 1× 7/16" S-CON washer (30-00163), 4× 1/2-13 UNC serrated flange nuts (20-00062), 2× 7/16" flat washers (30-00166), 2× 7/16-14 UNC serrated flange nuts (20-00103), 2× 7/16-14 UNC 1-1/2" hex head cap screws (10-10415), 6× .250 x 1.50 x 2.00" square hole spacers (CM-SP33), 4× 1/2-13 UNC 2" carriage bolts (10-10288), and 1× fishwire tool (CM-500-FW).
Yes, a fishwire tool (CM-500-FW) is included in the kit. This tool is used to route fasteners through the bumper and frame during installation.
The exhaust must be supported and lowered during installation. Step 1 requires you to support the exhaust and remove the bolt holding the exhaust hanger bracket to the bottom of the frame. After installation, the exhaust hanger bracket is reinstalled with spacers added between the frame and bracket.
The bumper does not need to be fully removed, but you must loosen the top nuts and remove the bottom nut from the bolt strap that attaches the bumper to the vehicle frame. The bottom of the T-shaped strap must be bent out of the way or cut if needed.
Yes, drilling is required. You must drill 1/2" holes in the bumper where the bolt strap was removed (Step 4). The existing attachment holes in the vehicle frame may also need to be enlarged, and a reinforcement inside the frame may require the existing hole to be enlarged (Step 6).
Drill 1/2" holes in the bumper where the bolt strap was removed, using the hitch as a template.
Yes. You must loosen the top nuts and remove the bottom nut from the T-shaped bolt strap that attaches the bumper to the frame. The bottom of the strap must be bent out of the way or cut if needed.
Torque M10 fasteners to 45 LB-FT. Torque 1/2" fasteners to 110 LB-FT. Torque 7/16" fasteners to 70 LB-FT.
The nylon washers (galvanic isolators) are placed between the spacer blocks and the bumper to prevent galvanic corrosion where dissimilar metals contact.
At least two spacers must be added between the frame and the exhaust hanger bracket before reinstalling the exhaust hanger bracket with the M10 bolts.
The manual lists a gross load capacity specification, but the specific values are blank in this copy. Do not exceed your vehicle manufacturer's recommended towing capacity. Contact Curt Manufacturing at 1-800-798-0813 for the exact capacity.
All non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch has a gross load capacity, but you must follow the lower of either the hitch capacity or your vehicle's capacity.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
The Curt 12157 is designed for use with ball mount D-221 / 45522.
Yes, the Curt 12157 is designed for 1997-2004 Buick Park Avenue. It uses ball mount D-221 / 45522.
Yes. You must drill 1/2" holes in the bumper and may need to enlarge existing frame holes. The bumper strap must be bent or cut out of the way.
Yes. You must support the exhaust and remove the hanger bracket bolt. After installation, reinstall the bracket with spacers added between the frame and bracket.
M10 fasteners: 45 LB-FT. 1/2" fasteners: 110 LB-FT. 7/16" fasteners: 70 LB-FT.
The manual does not specify the capacity values. Do not exceed your vehicle manufacturer's recommended towing capacity. Contact Curt at 1-800-798-0813 for capacity details.
Yes. All non-trailer loads must be supported by auxiliary stabilizing straps, or the warranty is voided.
On Sale Today
Original price was $639.85. Current price is $623.92.You save $15.93
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.