Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 1998-2002 Volvo C70 Coupe
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Volvo 850, C70, S70 and V70 (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 300 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
1998, 1999, 2000, 2001, 2002 Volvo C70 Coupe Class 2 Trailer Hitch, 1-1/4" Ball Mount, Select Volvo 850, C70, S70, V70
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1998 - 2002 | Volvo C70 | Coupe |
Yes, the 1998-2002 Volvo C70 Coupe Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-122113-002) is designed to fit the 1998-2002 Volvo C70.
The 1998-2002 Volvo C70 Coupe Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-122113-002) fits 1998-2002 Volvo C70 models. The 2002 model year is the last year covered by this part number. For newer models, check for an updated version.
The 1998-2002 Volvo C70 Coupe Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-122113-002) fits the following vehicles: 1998-2002 Volvo C70. Always verify your specific year, make, and model before ordering.
The 1998-2002 Volvo C70 Coupe Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-122113-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 122113 tow hook is designed for 93-97 Volvo 850, 98-00 S70, 98-00 V70, 98-04 C70, and 98 V70R models.
The Curt 122113 is designed for use with ballmount #55001 or #45501.
The manual specifies a gross load capacity of 3500 lbs. trailer weight and 300 lbs. tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity.
Non-trailer loads can be applied to this hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
No, you do not need to remove the exhaust. The installation procedure requires you to temporarily lower the exhaust at the rear of the car by unhooking the hangers to access the installation area. The exhaust is not permanently removed.
On certain models, yes. The handle nuts must fit between the rear side of the chassis end brackets and the bumper. On some vehicles it may be necessary to loosen the rear bumper from the chassis temporarily to place the handle nuts in position.
Drilling is required on some models. Some sedans will require drilling through the bottom inboard holes into the bumper bracket and bumper for end clearance of bolts. The manual does not specify which models require drilling.
The kit includes: 2 handle nuts (1/2-13), 2 hex bolts (1/2-13 x 1 3/4), 3 lock washers (1/2"), 1 carriage bolt (1/2-13 x 1 3/4), 1 hex nut (1/2-13), and 1 square hole spacer (CM-SP40, .188 x 1.00 x 3.00").
All hardware must be torqued to 110 lb.-ft.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
Curt Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. Curt's liability is limited to repair or replacement and excludes liability for incidental or consequential loss or damage.
Yes, the Curt 122113 is designed for 93-97 Volvo 850, 98-00 S70, 98-00 V70, 98-04 C70, and 98 V70R.
Torque all hardware to 110 lb.-ft.
Drilling is required on some models for bolt end clearance through the bumper bracket and bumper. The manual does not specify which models require drilling.
The hitch has a gross load capacity of 3500 lbs. trailer weight and 300 lbs. tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $407.85. Current price is $388.89.You save $18.96 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 8 - Tue, Aug 11
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.