Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2001 - 2010 Chevrolet Silverado 2500 HD
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2001-2010 Chevrolet Silverado 2500 HD Excluding factory receiver, Tommy Gate lift or cab & chassis
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 2500 HD, 2500 HD Classic, 3500, 3500 HD or 3500 Classic and GMC Sierra 2500 HD, 2500 HD Classic, 3500, 3500 HD or 3500 Classic (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Chevrolet Silverado 2500 HD Excluding factory receiver, Tommy Gate lift or cab & chassis Class 3 Hitch, 2", Select Silverado, Sierra 2500, 3500 HD (Round Tube Frame)
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2001 - 2010 | Chevrolet Silverado 2500 HD | Excluding factory receiver, Tommy Gate lift or cab & chassis |
The hitch weight is 600 lbs.
Yes, the Curt 13211 is designed for 2010 Chevy Silverado and GMC Sierra 2500HD and 3500 models.
Yes, the Curt 13211 is designed for 2010 GMC Sierra 2500HD and 3500 models.
Yes. The mounting strap location differs between short bed and long bed configurations. Refer to the bed configuration diagram in the installation instructions to determine the correct mounting strap placement for your truck.
Required tools are: ratchet, torque wrench, 13/16" socket, 22mm socket, 9/16" socket, and 22mm boxed end wrench.
The kit includes: 4× 3/8-16 UNC Grade 8 serrated flange nuts (part 20-00102), 4× 3/8-16 × 1" carriage bolts (part 10-10521), 4× 9/16-12 UNC Grade 8 serrated flange nuts (part 20-00104), 2× 0.188 × 1.25 × 1.50" round hole spacers (part CM-SP8), 4× 9/16-12 UNC 1-3/4" Grade 8 hex cap screws (part 10-10489), 2× 0.375 × 1.25 × 2.50" square hole spacers (part CM-SP9), and 2× 0.250" mounting straps (part CM-13211-MS).
No, drilling is not required. The hitch uses existing holes in the frame rails and weldnuts.
Yes. You must remove two 14mm bolts from the rear-most bottom section of each frame rail (4 bolts total). These bolts are saved and reused to secure the hitch in place during installation.
1. Remove the 14mm bolts from the rear-most bottom section of each frame rail and save them. 2. Raise the hitch into position, aligning the open holes in each frame rail where the 14mm bolts were removed, and loosely secure using those bolts. 3. Place mounting straps against the inside surface of each hitch side plate in line with the corresponding holes, and loosely install carriage bolts and hex flange nuts. 4. Secure the mounting straps to the bottom of the frame rail through existing holes. 5. Install remaining 9/16" fasteners through existing holes in the frame rail. 6. Torque all fasteners to specification.
Torque all 3/8" fasteners to 45 lb-ft, all 9/16" fasteners to 150 lb-ft, and all 14mm fasteners to 136 lb-ft.
The manual specifies gross load capacity when used as a weight carrying hitch and when used as a weight distribution hitch, but the specific capacity values are not filled in on the provided manual page. Do not exceed your vehicle manufacturer's recommended towing capacity. Contact Curt Manufacturing or your vehicle manufacturer for the exact capacity rating.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
Yes, the Curt 13211 is designed for 2010 Chevy Silverado and GMC Sierra 2500HD and 3500 models. Mounting strap placement differs for short bed and long bed configurations.
No drilling is required. The hitch uses existing frame rail holes and weldnuts.
You need a ratchet, torque wrench, 13/16" socket, 22mm socket, 9/16" socket, and 22mm boxed end wrench.
Torque 3/8" fasteners to 45 lb-ft, 9/16" fasteners to 150 lb-ft, and 14mm fasteners to 136 lb-ft.
The hitch weight is 600 lbs.
Periodically check that all fasteners are tight and all structural components are sound.
On Sale Today
Original price was $520.85. Current price is $380.71.You save $140.14 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Aug 21 - Mon, Aug 24
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.