Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2003-2004 Volkswagen Passat W8
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Volkswagen Passat, Audi A4, A4 Quattro and S4 (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45510, installation hardware, pin & clip
2003, 2004 Volkswagen Passat W8 Class 1 Hitch, 1-1/4" Ball Mount, Select Audi A4, Quattro, S4, Volkswagen Passat
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2003 - 2004 | Volkswagen Passat | W8 |
Yes, Curt part number 111643 is designed for 02-06 Audi A4 Avant models. It is designed for use with ball mount D-55010 / 45510.
Yes, Curt part number 111643 is designed for 04-08 Audi S4 Sedan models. It is designed for use with ball mount D-55010 / 45510.
Yes, Curt part number 111643 is designed for 03-05 Volkswagen Passat (W8) models. It is designed for use with ball mount D-55010 / 45510.
Curt hitch 111643 is designed for use with ball mount D-55010 or 45510.
The hitch includes: one 7/16" helical lock washer, four 3/8-16 x 1 1/2" hex bolts, four 3/8-16 hex nuts, four 3/8" fender washers, four 3/8" lock washers, one 0.188 x 1.50 x 3.00" round hole spacer (CM-SP34), one 7/16-14 hex nut, and one 7/16-14 x 2 1/2" hex bolt.
Yes, the spare tire must be temporarily removed during installation. The hitch is installed in the spare tire well area, and the spare tire is reinstalled after the hitch is secured.
Yes, drilling is required. The installation process involves marking the tire well in two places on each side and drilling for 3/8" bolts. The hitch may also require lower fascia trimming on some vehicles.
1. Clear the vehicle's tire well for drilling. 2. Place the hitch into position on top of the tow loop with hitch side plates resting against the sides of the tire well. Install 7/16" fasteners using the SP51 spacer under the tow loop, snugged only. 3. Adjust the hitch to be level and square with the car and mark the tire well in two places on each side for drilling. 4. Remove the hitch and drill for 3/8" bolts. Reposition the hitch and install all fasteners, with large fender washers installed inside the tire well opposite the hitch. 5. Torque the 7/16" fasteners to 70 ft-lb and 3/8" fasteners to 45 ft-lb. 6. Reinstall the spare tire.
The 7/16" fasteners must be torqued to 70 ft-lb.
The 3/8" fasteners must be torqued to 45 ft-lb.
The manual specifies a gross load capacity when used as a weight-carrying hitch, but the specific values are not provided in the document. You must not exceed your vehicle manufacturer's recommended towing capacity. For specific capacity information, contact Curt Manufacturing technical support at 1-800-798-0813.
All non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Curt Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt may repair or replace it at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
02-06 Audi A4 Avant, 04-08 Audi S4 Sedan, and 03-05 Volkswagen Passat (W8). Use with ball mount D-55010 or 45510.
Yes. Drilling for 3/8" bolts is required in the tire well. Lower fascia trimming may also be required on some vehicles.
Yes, the spare tire must be temporarily removed during installation and reinstalled after the hitch is secured.
7/16" fasteners: 70 ft-lb. 3/8" fasteners: 45 ft-lb.
Do not exceed your vehicle manufacturer's recommended towing capacity. All non-trailer loads must be supported by auxiliary stabilizing straps, or warranty is voided.
Periodically verify that all fasteners are tight and all structural components are sound.
On Sale Today
Original price was $613.85. Current price is $571.70.You save $42.15 (7%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Sep 11 - Mon, Sep 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.