2004-2007 Dodge Grand Caravan With Stow-n-Go Class 2 Hitch, 1-1/4" MountCURTOriginal price was $559.85. Current price is $409.08.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2004-2007 Dodge Caravan With Stow-n-Go
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Chrysler Town & Country, Dodge Caravan and Dodge Grand Caravan (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45520, pin & clip (Uses pre-existing vehicle hardware for installation)
2004, 2005, 2006, 2007 Dodge Caravan With Stow-n-Go Class 2 Hitch, 1-1/4" Mount, Select Town & Country, Caravan, Grand Caravan
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2004 - 2007 | Dodge Caravan | With Stow: n-Go |
The 2004-2007 Dodge Caravan With Stow-n-Go Class 2 Hitch, 1-1/4" Mount (Part #CHD-122893-002) fits 2004-2007 Dodge Caravan models. The 2007 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2004-2007 Dodge Caravan With Stow-n-Go Class 2 Hitch, 1-1/4" Mount (Part #CHD-122893-002) is designed to fit the 2004-2007 Dodge Caravan.
The 2004-2007 Dodge Caravan With Stow-n-Go Class 2 Hitch, 1-1/4" Mount (Part #CHD-122893-002) fits the following vehicles: 2004-2007 Dodge Caravan. Always verify your specific year, make, and model before ordering.
The 2004-2007 Dodge Caravan With Stow-n-Go Class 2 Hitch, 1-1/4" Mount (Part #CHD-122893-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part number 12289 is designed for 2004–2007 Chrysler and Dodge Caravan models, including the Grand Caravan with Stow 'n Go seating. Confirm your vehicle year and model match this range before purchase.
The gross load capacity when used as a weight-carrying hitch is 3,500 lbs trailer weight and 350 lbs tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Check your vehicle's owner manual for the final limit.
Curt hitch 12289 is designed for use with ball mount D-20 (part number 45520). Use only this compatible mount to ensure safe operation.
No. The manual explicitly states 'NO DRILLING REQUIRED'. The hitch uses existing holes in the vehicle frame where factory fasteners are removed.
No. The manual states 'NO FASCIA TRIMMING REQUIRED'. The hitch installs without modification to the vehicle's exterior trim.
Yes. The hitch uses existing vehicle fasteners: three 10mm bolts from the rear spring shackle and one 12mm bolt forward of the spring shackle (both sides). You remove these bolts in step 1 and reuse them to secure the hitch in step 3. No additional fasteners are required. The hitch also uses existing weld nuts on the vehicle frame.
All 10mm fasteners must be torqued to 48 lb-ft.
All 12mm fasteners must be torqued to 86 lb-ft.
1. Remove the three 10mm bolts attaching the rear spring shackle to the vehicle frame, and the single 12mm bolt forward of the spring shackle. Save all bolts. 2. Position the hitch's left mounting tab on the driver side over the leaf spring near the rear axle, pull towards the rear into position, and repeat on the passenger side. 3. Raise the hitch into position so it contacts the vehicle frame rail and align the 3 holes with the frame holes. 4. Bolt the hitch in place using the previously removed fasteners. 5. Torque all 10mm fasteners to 48 lb-ft and all 12mm fasteners to 86 lb-ft.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a retorque interval or maintenance schedule beyond this periodic inspection.
Curt Manufacturing warrants the hitch to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace it at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. Curt's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, it fits 2004–2007 Chrysler and Dodge Caravan models, including Grand Caravan with Stow 'n Go.
3,500 lbs trailer weight, 350 lbs tongue weight. Do not exceed your vehicle manufacturer's towing capacity.
No drilling or fascia trimming required. The hitch uses existing vehicle fasteners and holes.
10mm fasteners: 48 lb-ft. 12mm fasteners: 86 lb-ft.
No. The hitch reuses your vehicle's existing 10mm and 12mm bolts from the spring shackle area.
Use ball mount D-20 (part number 45520), which is designed for this hitch.
On Sale Today
Original price was $559.85. Current price is $409.08.You save $150.77 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.