2004-2009 Toyota Prius All Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $441.85. Current price is $326.92.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2004 - 2009 Toyota Prius
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2004-2009 Toyota Prius All
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Toyota Prius (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2004, 2005, 2006, 2007, 2008, 2009 Toyota Prius All Class 1 Trailer Hitch, 1-1/4" Receiver, Select Toyota Prius
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494The 2004-2009 Toyota Prius All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11468-001) fits 2004-2009 Toyota Prius models. The 2009 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2004-2009 Toyota Prius All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11468-001) fits the following vehicles: 2004-2009 Toyota Prius. Always verify your specific year, make, and model before ordering.
Yes, the 2004-2009 Toyota Prius All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11468-001) is designed to fit the 2004-2009 Toyota Prius.
The 2004-2009 Toyota Prius All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11468-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt hitch model 11468 is designed for the Toyota Prius. It is compatible with ballmount #55001 or #45501.
Hitch 11468 is designed for use with ballmount #55001 or #45501.
The hitch has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Non-trailer loads can be applied to this hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Yes. You must remove the factory tow hooks (which should be returned to the customer) and the plastic under-body fascia on the driver side before installation.
No. The manual states 'NO DRILLING REQUIRED'. The hitch uses existing weld nuts in the frame.
Yes. You must enlarge the tow hook slot on the under-body fascia on the driver side to fit around the driver side hitch plate. The fascia is then reinstalled with existing hardware.
The hitch includes 4 M10×1.25 hex head cap screws (HHCS), class 10.9, zinc-plated (part 10-10373) and 4 S-CON washers, 7/16 inch (part 30-00163).
All M10 fasteners must be torqued to 48 ft-lbs.
1. Remove the factory tow hooks and return them to the customer. 2. Remove the plastic under-body fascia on the driver side. 3. Lift the hitch into position and secure it with the M10 bolts and conical washers, using the existing weld nuts in the frame. 4. Torque all M10 fasteners to 48 ft-lbs. 5. Enlarge the tow hook slot on the under-body fascia to fit around the driver side hitch plate. 6. Reinstall the under-body fascia with existing hardware.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
The manual recommends periodically checking the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. A specific interval is not provided.
Yes, model 11468 is designed for the Toyota Prius and works with ballmount #55001 or #45501.
No drilling required. The hitch uses existing frame weld nuts.
Yes, you must enlarge the tow hook slot on the under-body fascia on the driver side to fit around the hitch plate.
Torque all M10 fasteners to 48 ft-lbs.
2,000 lbs trailer weight and 200 lbs tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
Non-trailer loads must be supported by auxiliary stabilizing straps, or warranty is voided.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2004 - 2009 | Toyota Prius | — |
On Sale Today
Original price was $444.85. Current price is $335.60.You save $109.25 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Sep 11 - Mon, Sep 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.