2005-2006 Scion xA All Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $503.85. Current price is $478.71.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2005 - 2006 Scion xA
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2005-2006 Scion xA All
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Scion xA (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2005, 2006 Scion xA All Class 1 Trailer Hitch, 1-1/4" Receiver, Select Scion xA
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2005 - 2006 | Scion xA | — |
The 2005-2006 Scion xA All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11488-001) fits 2005-2006 Scion xA models. The 2006 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2005-2006 Scion xA All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11488-001) fits the following vehicles: 2005-2006 Scion xA. Always verify your specific year, make, and model before ordering.
Yes, the 2005-2006 Scion xA All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11488-001) is designed to fit the 2005-2006 Scion xA.
The 2005-2006 Scion xA All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11488-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt hitch 11488 is designed for 2004–2006 Scion xA models only. Do not use on other model years or vehicles.
No. The installation notes explicitly state 'NO DRILLING REQUIRED'. The hitch uses existing weld nuts on the frame rails.
All 10 mm fasteners must be torqued to 48 lb-ft.
Yes, if equipped. Remove tow hooks from both driver and passenger side frame rails before installation and return them to the customer.
Yes. The installation notes recommend lowering the rear exhaust hanger for ease of installation. Reinstall it after the hitch is secured.
Curt hitch 11488 is designed for use with ballmount #55001 or #45501.
The kit includes 4 hex cap screws (HHCS) M10×1.25×35 mm, grade 10.9, zinc-plated (part 10-10298) and 4 conical washers (part 30-00163). These fasteners secure the hitch to the existing weld nuts on the frame rails.
No. Curt hitch 11488 is designed exclusively for 2004–2006 Scion xA models. Installation on other model years is not supported.
Return the tow hooks to the customer. The installation instructions note '(Return to customer.)' after removal from the driver and passenger side frame rails.
Raise the hitch into position and secure it with the four hex bolts and conical washers through the existing weld nuts on the driver and passenger side frame rails. Do not fully tighten at this stage.
1. Remove tow hooks from frame rails if equipped (return to customer). 2. Remove plastic push fasteners from rear bumper fascia straps (reuse later). Lower rear exhaust hanger for ease of installation. 3. Raise hitch into position and secure with hex bolts and conical washers through existing weld nuts. 4. Reinstall rear bumper fascia straps. 5. Torque all 10 mm fasteners to 48 lb-ft and reinstall the exhaust hanger.
Yes. After securing the hitch, reinstall the plastic push fasteners and rear bumper fascia straps that were removed in step 2.
Reinstall the rear exhaust hanger after torquing all fasteners to 48 lb-ft. It is removed temporarily for ease of installation only.
The hitch uses four hex cap screws (HHCS) M10×1.25×35 mm, grade 10.9, zinc-plated (part number 10-10298). These are torqued to 48 lb-ft.
The hitch uses four conical washers, 7/16 inch, zinc-plated (part number 30-00163). These washers are installed with the hex bolts.
The manual does not provide the specific gross load capacity, trailer weight limit, or tongue weight limit for this hitch. Contact Curt Manufacturing or consult your vehicle's owner manual for towing capacity. Do not exceed your vehicle manufacturer's recommended towing capacity.
Periodically check that all fasteners are tight and that all structural components are sound. This maintenance helps ensure safe operation.
Alteration to, misuse of, or improper installation of the hitch voids the warranty. Curt Manufacturing's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
On Sale Today
Original price was $507.85. Current price is $486.98.You save $20.87
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 16 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.