2005-2017 Chevrolet Equinox All CURT Class 3 Hitch, 2"CURTOriginal price was $332.85. Current price is $257.71.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2005 - 2017 Chevrolet Equinox
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2005-2017 Chevrolet Equinox All
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Chevrolet Equinox, GMC Terrain, Pontiac Torrent and Saturn Vue (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 Chevrolet Equinox All Class 2 Hitch, 1-1/4" Mount, Select Equinox, Terrain, Torrent, Vue
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2005 - 2017 | Chevrolet Equinox | — |
The 2005-2017 Chevrolet Equinox All Class 2 Hitch, 1-1/4" Mount (Part #CHD-122913-001) fits the following vehicles: 2005-2017 Chevrolet Equinox. Always verify your specific year, make, and model before ordering.
Yes, the 2005-2017 Chevrolet Equinox All Class 2 Hitch, 1-1/4" Mount (Part #CHD-122913-001) is designed to fit the 2005-2017 Chevrolet Equinox.
The 2005-2017 Chevrolet Equinox All Class 2 Hitch, 1-1/4" Mount (Part #CHD-122913-001) fits 2005-2017 Chevrolet Equinox models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2005-2017 Chevrolet Equinox All Class 2 Hitch, 1-1/4" Mount (Part #CHD-122913-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part number 122913 is designed for 2005–2017 Chevy Equinox models. However, you will need to remove the center fascia panel to provide space for hitch installation. The panel should be returned to the vehicle owner after installation.
Yes, part number 122913 is designed for 2010–2017 GMC Terrain models. Like the Chevy Equinox, you will need to remove the center fascia panel to provide space for hitch installation.
Yes, part number 122913 is designed for 2002–2007 Saturn Vue (Redline) models. However, fascia trimming is required on Saturn Vue Redline. The installation method differs slightly from other applications: you will fishwire carriage bolts and square hole spacers through the end of the bumper beam instead of using hex bolts and conical washers on the frame rails.
Yes, part number 122913 is designed for 2006–2009 Pontiac Torrent models. Installation follows the same procedure as the Saturn Vue Redline, using fishwire carriage bolts and square hole spacers through the bumper beam.
Part number 122913 is designed for use with Ballmount #D-21 or #45521.
You will need: a ratchet, torque wrench, 8" extension, 19mm socket, 3/4" socket, and needlenose pliers. The kit includes a fishwire tool (CM-500-FW) for routing bolts through the bumper beam on certain applications.
The kit includes: 6× M12-1.75 × 40mm hex bolts, 6× 1/2" conical toothed washers, 2× 1/2-13 × 1 3/4" carriage bolts, 2× 0.250 × 1.50 × 2.00" square hole spacers (CM-SP1), 2× HFN 1213 hex flange nuts, and 1× CM-500-FW fishwire tool.
No, drilling is not required. The hitch uses existing weldnuts on the frame rails and existing holes in the bumper beam.
You must remove the panel at the center of the fascia to provide space for hitch installation. After installation, return the panel to the vehicle owner. You should also remove any existing M12 fasteners from the outside surfaces of the frame rails and remove any tie-down brackets, returning them to the customer.
Clean the weldnuts before installation: (1) spray with penetrating oil and let soak for 5 minutes, (2) clean with a wire brush and compressed air, and (3) if necessary, use an M12-1.75 tap to clean the weldnut threads.
1. On Chevy Equinox and GMC Terrain, remove the center fascia panel. 2. Remove existing M12 fasteners and tie-down brackets from the frame rails. 3. Raise the hitch into position and fasten to the bumper beam using M12 bolts and conical washers. 4. Install M12 bolts and conical washers on the outside surfaces of the frame rails. 5. On Saturn Vue and some Chevy Equinox/GMC Terrain models, fishwire carriage bolts and square hole spacers through the bumper beam end. 6. Torque all M12 hardware to 79 ft-lbs and all 1/2" hardware to 110 ft-lbs.
The fishwire technique is used to route carriage bolts and square hole spacers through the end of the bumper beam on Saturn Vue and some Chevy Equinox/GMC Terrain models. The kit includes a fishwire tool (CM-500-FW) for this purpose. You may need to enlarge the holes to 17/32" to ensure clearance of the 1/2" bolts.
Torque all M12 hardware to 79 ft-lbs and torque all 1/2" hardware to 110 ft-lbs. This applies to both the hex bolts on the frame rails and the carriage bolts used with the square hole spacers.
Yes, fascia trimming is required on Saturn Vue Redline models. The manual does not provide specific trimming details; contact Curt Manufacturing technical support at 1-800-798-0813 for detailed trimming instructions.
Yes, you may need to enlarge the holes to 17/32" to ensure clearance of the 1/2" carriage bolts, particularly when fishwiring bolts and square hole spacers through the bumper beam on Saturn Vue and some Chevy Equinox/GMC Terrain models.
All non-trailer loads applied to this product must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch has a gross load capacity, but you must follow the lower of either the hitch rating or your vehicle's manufacturer specification.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is an ongoing maintenance requirement to ensure safe operation.
Yes, if you own a 2005–2017 Chevy Equinox, 2010–2017 GMC Terrain, 2002–2007 Saturn Vue (Redline), or 2006–2009 Pontiac Torrent. Chevy Equinox and GMC Terrain require fascia panel removal; Saturn Vue Redline requires fascia trimming.
Ratchet, torque wrench, 8" extension, 19mm socket, 3/4" socket, and needlenose pliers. The kit includes a fishwire tool for routing bolts on certain applications.
No, drilling is not required. The hitch uses existing weldnuts and holes.
Torque all M12 hardware to 79 ft-lbs and all 1/2" hardware to 110 ft-lbs.
Do not exceed your vehicle manufacturer's recommended towing capacity. All non-trailer loads must be supported by auxiliary stabilizing straps, or the warranty is voided.
Periodically verify that all fasteners are tight and all structural components are sound.
On Sale Today
Original price was $475.85. Current price is $450.46.You save $25.39 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.