Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2006-2008 Mazda 6 Sedan
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Ford Fusion, Lincoln MKZ, Lincoln Zephyr, Mazda 6 and Mercury Milan (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45522, installation hardware, pin & clip
2006, 2007, 2008 Mazda 6 Sedan Class 1 Hitch, 1-1/4" Mount, Select Fusion, MKZ, Zephyr, Mazda 6, Milan
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2006 - 2008 | Mazda 6 | Sedan |
The 2006-2008 Mazda 6 Sedan Class 1 Hitch, 1-1/4" Mount (Part #CHD-113293-005) fits the following vehicles: 2006-2008 Mazda 6. Always verify your specific year, make, and model before ordering.
The 2006-2008 Mazda 6 Sedan Class 1 Hitch, 1-1/4" Mount (Part #CHD-113293-005) fits 2006-2008 Mazda 6 models. The 2008 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2006-2008 Mazda 6 Sedan Class 1 Hitch, 1-1/4" Mount (Part #CHD-113293-005) is designed to fit the 2006-2008 Mazda 6.
The 2006-2008 Mazda 6 Sedan Class 1 Hitch, 1-1/4" Mount (Part #CHD-113293-005) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt hitch 113293 is designed for Ford Fusion and Mercury Milan. However, drilling is required on each side for proper fitment. Consult the installation manual for drilling locations, or contact Curt Technical Support at 1-800-798-0813 for specific guidance on your model year.
Yes, Curt hitch 113293 fits Mazda 6 models. Drilling is required on each side for Mazda 6 models, but not for the Sport Wagon variant. Consult the installation manual for drilling locations or contact Curt Technical Support at 1-800-798-0813.
Yes, Curt hitch 113293 is designed for 06 Lincoln Zephyr and 07-current MKZ models.
Curt hitch 113293 is designed for use with ball mount D-221.
The kit includes: two 1/2-13 x 1 1/4" carriage bolts, two 1/2-13 x 1 1/2" carriage bolts, two CM-SP12 square hole spacers, two CM-SP62 spacer plates, two M8-1.25 x 30 hex head tap bolts, four HFN 1213 hex flange nuts, two 5/16" washers, two 5/16" lock washers, and one 1/2" fishwire tool.
The manual does not specify required tools beyond the included 1/2" fishwire tool. Standard installation tools such as wrenches, sockets, and a torque wrench (for tightening to 23 ft-lbs and 110 ft-lbs) are implied. For drilling operations on some models, a drill with appropriate bits is needed. Contact Curt Technical Support at 1-800-798-0813 for a complete tool list.
Yes. Step 1 of the installation requires lowering the mufflers and removing two 8mm hex bolts from the bumper beam. The muffler must be lowered to provide clearance for the hitch to be raised into position over the exhaust.
Two rubber plugs must be removed from the spare tire well during Step 1 of installation. These plugs are removed to allow access for installing carriage bolts into the spare tire well in Step 5.
The included 1/2" fishwire tool is used in Step 4 to fish a 1/2 x 1 1/4" carriage bolt and CM-SP12 spacer into the bumper beam rail on both sides of the vehicle.
After installing the remaining 1/2" carriage bolts and round spacers into the spare tire well in Step 5, use silicone caulk or equivalent to seal the holes to prevent exhaust fumes and water from entering.
Drilling may be required depending on your vehicle model. Drilling is required on each side for Ford Fusion and Mazda 6 models. No drilling is required for Mazda 6 Sport Wagon. The manual notes that some models may require drilling for Steps 4 and 5. Contact Curt Technical Support at 1-800-798-0813 for specific drilling locations and requirements for your vehicle.
Fascia trimming may be required. The installation notes state "May require fascia trimming" and instruct to "Notch fascia as needed to provide clearance for hitch." The specific trimming requirements depend on your vehicle model. Contact Curt Technical Support at 1-800-798-0813 for guidance on your specific vehicle.
Torque all 8mm fasteners to 23 ft-lbs. Torque all 1/2" fasteners to 110 ft-lbs. These specifications apply to both the hex head tap bolts (M8-1.25 x 30) and the carriage bolts used in the installation.
The manual does not provide the gross load capacity, trailer weight capacity, or tongue weight capacity for this hitch. Do not exceed your vehicle manufacturer's recommended towing capacity. Contact Curt Technical Support at 1-800-798-0813 or consult your vehicle's owner manual for towing limits.
Non-trailer loads may be applied to this hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch itself has a rated capacity, but your vehicle's engine, transmission, brakes, and frame have their own limits. Always consult your vehicle owner's manual for the maximum towing weight your specific vehicle can safely handle.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a maintenance interval, so perform these checks regularly, especially before towing.
Yes. Drilling is required for Ford Fusion and Mazda 6 (except Sport Wagon). Use with ball mount D-221.
Yes. Step 1 requires lowering mufflers, removing two 8mm bolts from the bumper beam, and removing two rubber plugs from the spare tire well.
No. Drilling is required for Ford Fusion and Mazda 6, but not for Mazda 6 Sport Wagon. Some models may require drilling for Steps 4 and 5. Fascia trimming may also be needed.
Torque all 8mm fasteners to 23 ft-lbs and all 1/2" fasteners to 110 ft-lbs.
Non-trailer loads must be supported by auxiliary stabilizing straps. Failure to do so voids the warranty.
Periodically check that all fasteners are tight and structural components are sound. No specific interval is provided.
On Sale Today
Original price was $548.85. Current price is $512.87.You save $35.98 (7%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 10 - Thu, Aug 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.