Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2006-2015 Honda Civic Sedan
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Honda Civic, Acura CSX and Acura ILX (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Honda Civic Sedan Class 1 Trailer Hitch, 1-1/4" Receiver, Select Honda Civic, Acura CSX, ILX
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2006 - 2015 | Honda Civic | Sedan |
The 2006-2015 Honda Civic Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11391-004) fits 2006-2015 Honda Civic models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2006-2015 Honda Civic Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11391-004) fits the following vehicles: 2006-2015 Honda Civic. Always verify your specific year, make, and model before ordering.
Yes, the 2006-2015 Honda Civic Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11391-004) is designed to fit the 2006-2015 Honda Civic.
The 2006-2015 Honda Civic Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11391-004) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part 11391 is designed for Honda Civic (including Si and Hybrid models), Acura CSX (Canadian models only), and Acura ILX. It fits 2006-present model years in sedan and coupe body styles.
No. Part 11391 is designed for Acura CSX in Canada only. If you live outside Canada, this hitch is not compatible with your vehicle.
The 11391 is rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The 11391 is designed for use with Curt ballmount part 45501. Euro mount options are also available: part 45571 (1-7/8" ball) and part 45572 (2" ball).
You will need: torque wrench, ratchet, sockets (10mm, 9/16", 11/16", 3/4"), flat screwdriver, prybar, tin snips or aviation shears, power drill, and 17/32" drill bit.
Yes. The muffler must be temporarily lowered during installation. In step 7, you will raise the hitch and muffler simultaneously into position. The exhaust hanger must also be lowered from its frame attachment in step 1.
Yes. The heat shield and underbody panel (if present) must be removed in step 2. They will be trimmed and then reinstalled using the original fasteners. Save all four fasteners that attach the heat shield.
Drilling is required on some models. Some models may require the forwardmost mounting holes to be enlarged using a 17/32" drill bit. The manual notes this as a conditional requirement, not a universal one.
Yes. The heat shield and underbody panel must be trimmed as shown in the installation diagram. After trimming, they are reinstalled using the original fasteners removed in step 2.
Fishwire is a technique for inserting fasteners through tight spaces. In step 4, you fishwire the 7/16" carriage bolts and spacers into existing holes in the frame. The manual includes a fishwire technique diagram on page 5. Two 7/16" fishwire pieces are included in the parts list.
1. Lower the rear rubber exhaust hanger. 2. Remove and trim the heat shield and underbody panel. 3. Insert the 3/8" U-bolt through the tow loop. 4. Fishwire the 7/16" carriage bolts and spacers into frame holes. 5. Insert 1/2" handle nuts through access holes on both sides. 6. Reattach the trimmed heat shield and panel. 7. Raise the hitch and muffler simultaneously and loosely secure both sides. 8. Attach the hitch to the tow loop. 9. Torque all fasteners to specification.
Leave fasteners loose during installation. In step 7, you loosely secure the driver and passenger sides. Only after the hitch is fully positioned and attached to the tow loop (step 8) do you torque all fasteners to their final specifications in step 9.
Torque all 3/8" hardware to 45 ft-lbs. Torque all 7/16" hardware to 70 lb-ft. Torque all 1/2" hardware to 75 lb-ft. These specifications apply to the final tightening in step 9, after the hitch is positioned and attached.
The U-bolt is 3/8" - 16 x 1.00 x 1.88. It is inserted through the tow loop in step 3 of the installation.
Safety glasses must be worn at all times while installing this product. Read all instructions thoroughly before beginning. Two people may be required to ease installation. Using proper tools will improve installation quality and reduce time required.
Non-trailer (wheel-less) loads can be applied to the hitch, but they must be supported by auxiliary stabilizing straps. Curt recommends part 18050 stabilizing straps for all non-trailer loads. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This check should be performed regularly to maintain safe operation.
The kit includes: 2 serrated flange nuts (7/16-14 UNC), 2 hex head cap screws (1/2-13 UNC, 1-1/4"), 2 washers (1/2"), 2 handle nuts (1/2-13 UNC), 2 square hole spacers (.250 x .88 x 2.25"), 2 carriage bolts (7/16-14 UNC, 1-1/2"), 1 U-bolt (3/8-16 x 1.00 x 1.88), 2 serrated flange nuts (3/8-16 UNC), and 2 pieces of 7/16" fishwire.
Yes, the 11391 fits Honda Civic (including Si and Hybrid) and Acura ILX from 2006-present in sedan and coupe styles. Acura CSX is compatible only in Canada.
Maximum 2,000 lbs trailer weight and 200 lbs tongue weight. Do not exceed your vehicle manufacturer's recommended towing capacity.
Torque wrench, ratchet, sockets (10mm, 9/16", 11/16", 3/4"), screwdriver, prybar, tin snips, power drill, and 17/32" drill bit.
Yes. The muffler must be temporarily lowered, and the heat shield and underbody panel must be removed, trimmed, and reinstalled.
3/8" hardware: 45 ft-lbs. 7/16" hardware: 70 lb-ft. 1/2" hardware: 75 lb-ft.
Yes, but non-trailer loads must be supported by auxiliary stabilizing straps (Curt part 18050 recommended). Failure to properly support non-trailer loads voids the warranty.
Periodically check that all fasteners are tight and all structural components are sound.
On Sale Today
Original price was $410.85. Current price is $395.64.You save $15.21
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.