Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2018 GMC Acadia
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Shipping Weight | 2.000 |
| Axles | 1-4 |
| Mount Angles | Various |
| Warranty | Limited Lifetime |
| Display | OLED Screen |
| Finish | Black |
| Activation | Tri-axis inertia |
| Level Adjust | Auto |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2018 | GMC Acadia | — |
Yes, the 2007-2018 GMC Acadia All CURT Assure Proportional 1-4 Axel Auto Leveling Motion-Sensing Trailer Brake Controller (Part #CBC1-134) is designed to fit the 2007-2018 GMC Acadia.
The 2007-2018 GMC Acadia All CURT Assure Proportional 1-4 Axel Auto Leveling Motion-Sensing Trailer Brake Controller (Part #CBC1-134) fits 2007-2018 GMC Acadia models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2007-2018 GMC Acadia All CURT Assure Proportional 1-4 Axel Auto Leveling Motion-Sensing Trailer Brake Controller (Part #CBC1-134) fits the following vehicles: 2007-2018 GMC Acadia. Always verify your specific year, make, and model before ordering.
The 2007-2018 GMC Acadia All CURT Assure Proportional 1-4 Axel Auto Leveling Motion-Sensing Trailer Brake Controller (Part #CBC1-134) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The CURT brake control harness (part numbers 51422 and 51423) is designed for Buick Enclave, Chevrolet Traverse, GMC Acadia, and Saturn Outlook models. Confirm your vehicle is one of these models before purchasing. The manual does not specify which part number applies to which vehicle, so contact CURT at 1.877.287.8634 to confirm the correct part number for your specific vehicle.
The CURT brake control harness connects your vehicle's factory brake control connector to an aftermarket brake control unit. It allows the brake control unit to receive brake signal information from your vehicle's braking system.
The 6-pin vehicle brake control harness connector is located under the dash, to the left of the steering column, near the emergency brake pedal. It will be taped to another harness. The manual indicates two possible locations: BH1 (under dash, left of steering column, near emergency brake pedal) or BH3 (under dash, in junction box left of steering column). Consult your vehicle's service manual or contact CURT to determine which location applies to your specific vehicle.
Yes. You must carefully remove the vehicle trim panel underneath the dash to access the 6-pin brake control harness connector. When removing the trim panel, be careful not to pull on any courtesy lamp wires that are attached to it.
1. Locate the 6-pin vehicle brake control harness connector under the dash, left of the steering column, near the emergency brake pedal. 2. Insert the connector on the CURT brake control harness into the vehicle connector. 3. Ensure the connector is fully inserted with locking tabs in place. 4. Insert the brake control harness's black connector into the brake control unit's quick plug connector. 5. Secure the harness with the provided cable ties, avoiding any pinch points.
The manual confirms that cable ties are provided with the harness to secure it in place. Use these ties to secure the harness while avoiding any pinch points. The manual does not specify the quantity, length, or material of the cable ties.
The connector is fully inserted when the locking tabs are in place. Push the CURT brake control harness connector into the vehicle connector until you feel it seat and the locking tabs engage.
If your vehicle does not supply power to the brake control harness, you must install the universal brake control wiring kit (part number 51500). Follow the installation instructions provided with that kit to route all wires as directed. This kit will provide the necessary power connection for the brake control harness to function.
After installation, test the brake control harness for proper function by following the test procedures in the brake control unit instruction manual. Mount the brake control unit as directed in its manual and perform all test procedures as instructed. The harness itself does not have a separate test procedure; testing is performed through the brake control unit.
When removing the vehicle trim panel underneath the dash, carefully avoid pulling on any courtesy lamp wires that are attached to the panel. Pulling on these wires can damage them. Take your time and gently separate the trim panel from the dash.
Pinch points can damage the harness wires or connectors, causing electrical faults or loss of brake control function. When securing the harness with the provided cable ties, route it carefully and ensure the ties do not pinch or crush any part of the harness.
The harness fits Buick Enclave, Chevrolet Traverse, GMC Acadia, and Saturn Outlook. Contact CURT at 1.877.287.8634 to confirm which part number applies to your vehicle.
Yes, you must carefully remove the vehicle trim panel underneath the dash to access the 6-pin brake control harness connector. Avoid pulling on courtesy lamp wires when removing the panel.
The harness includes a 6-pin connector for the vehicle, a black connector for the brake control unit, and cable ties for securing the harness. The manual does not list other included components.
Install the universal brake control wiring kit (part number 51500) following its installation instructions to provide the necessary power connection.
On Sale Today
Original price was $291.90. Current price is $182.30.You save $109.60 (38%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 30 - Wed, Sep 2
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.