Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2007 Chevrolet Silverado 2500 HD Classic
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2007 Chevrolet Silverado 2500 HD Classic 6' bed, excluding factory receiver, Tommy Gate lift or cab & chassis
Whatever the next item is on your to-do list -- whether it's arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset -- CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Chevy Silverado 2500 HD, 2500 HD Classic or 3500 and GMC Sierra 2500 HD or 2500 HD Classic (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2" receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
2007 Chevrolet Silverado 2500 HD Classic 6' bed, excluding factory receiver, Tommy Gate lift or cab & chassis Class 4 Hitch, 2" Receiver, Select Chevrolet Silverado, GMC Sierra 2500, 3500
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 | Chevrolet Silverado 2500 HD Classic | 6' bed, excluding factory receiver, Tommy Gate lift or cab & chassis |
Curt part number 14108 is designed for 2007 Chevy and GMC HD Pickups with a 6-foot bed. If your vehicle matches this year, make, model, and bed length, this hitch is compatible. Do not use on other bed lengths or model years without confirming fitment with the manufacturer.
The manual specifies two capacity ratings depending on hitch type: when used as a weight-carrying hitch, the gross load capacity is 10,000 lbs trailer weight and 1,000 lbs tongue weight; when used as a weight-distribution hitch, it is 12,000 lbs trailer weight and 1,200 lbs tongue weight. You must not exceed your vehicle manufacturer's recommended towing capacity, whichever is lower.
The kit includes: 4× square hole spacers (CM-SP1, 0.250 × 1.50 × 2.00 inches), 4× 1/2-13 UNC Grade 8 carriage bolts (1-3/4 inches), 4× 1/2-13 UNC Grade 8 serrated flange nuts, 4× M14×2 Class 10.9 hex cap screws (40mm), 2× 9/16-inch standard washers, 2× 9/16-inch lock washers, and 2× 9/16-inch flat washers.
No. The manual explicitly states "NO DRILLING REQUIRED" for this hitch. Installation uses existing frame holes and weldnuts.
1. Remove the 14mm hex bolt from each end of the frame. 2. Remove and relocate the ground wire and ground bolt on the driver's side frame rail. 3. Raise the hitch into position and install the fasteners as shown in the diagram. 4. Torque all 1/2-inch fasteners to 110 lb-ft and all 14mm fasteners to 126 lb-ft.
All 1/2-inch fasteners must be torqued to 110 lb-ft.
All 14mm fasteners must be torqued to 126 lb-ft.
The manual does not mention battery disconnection. This installation involves mechanical fastening only and does not involve electrical work.
The manual does not specify which tools are required. You will need a socket or wrench set to fit 1/2-inch and 14mm fasteners, and a torque wrench capable of measuring up to 126 lb-ft. Contact the manufacturer or your installer if you need a complete tool list.
After installation, periodically check that all fasteners are tight and that all structural components are sound. The manual recommends regular inspection to ensure the hitch remains secure during use.
Do not exceed your vehicle manufacturer's recommended towing capacity. The Curt 14108 has a maximum capacity of 10,000 lbs trailer weight (weight-carrying mode) or 12,000 lbs (weight-distribution mode), but your vehicle's limit may be lower. Always follow the vehicle manufacturer's specification.
Curt Manufacturing warrants the product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation.
2007 Chevy and GMC HD Pickups with a 6-foot bed only.
No, drilling is not required. The hitch uses existing frame holes and weldnuts.
Torque 1/2-inch fasteners to 110 lb-ft and 14mm fasteners to 126 lb-ft.
Weight-carrying mode: 10,000 lbs trailer, 1,000 lbs tongue. Weight-distribution mode: 12,000 lbs trailer, 1,200 lbs tongue. Do not exceed your vehicle manufacturer's recommended capacity.
Periodically check that all fasteners are tight and all structural components are sound.
On Sale Today
Original price was $567.85. Current price is $411.71.You save $156.14 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Aug 21 - Mon, Aug 24
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.