Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2008 - 2013 BMW X6
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2008-2013 BMW X6 All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the BMW X6 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2008, 2009, 2010, 2011, 2012, 2013 BMW X6 All Class 3 Trailer Hitch, 2" Receiver, Select BMW X6
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2013 | BMW X6 | — |
Yes, the 2008-2013 BMW X6 All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13114-001) is designed to fit the 2008-2013 BMW X6.
The 2008-2013 BMW X6 All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13114-001) fits 2008-2013 BMW X6 models. The 2013 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2008-2013 BMW X6 All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13114-001) fits the following vehicles: 2008-2013 BMW X6. Always verify your specific year, make, and model before ordering.
The 2008-2013 BMW X6 All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13114-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The manual lists a gross load capacity of 6,000 lbs. trailer weight and 600 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Check your BMW X6 or X6M owner's manual for the maximum towing capacity your specific vehicle supports.
Yes, the Curt 13114 is designed for BMW X6 and X6M vehicles. Installation requires removal of the lower bumper fascia and bumper, and trimming of the bumper fascia to fit around the hitch without interference.
No. The installation note explicitly states: 'OEM tow hooks can no longer be used at rear of vehicle.' The hitch installation replaces the factory tow hook capability.
You will need: ratchet, 8mm socket, 18mm socket, 19mm socket, torque wrench, small center punch, utility knife, and plastic rivet tool. The center punch and rivet tool are needed to remove the three rivets from the lower bumper fascia.
The kit includes: 8 hex nuts M12×1.5 Class 10.9 (part 20-00133), 8 S-CON washers 1/2 inch (part 30-00149), and 3 black M6 rivets (part 10-10401). The rivets are used to reinstall the bumper fascia after trimming.
No. The installation notes explicitly state 'NO DRILLING REQUIRED.' The hitch uses existing mounting points on the vehicle after removal of the bumper assembly.
You must remove: 3 rivets from the lower bumper fascia, the bottom bolt behind the fascia, bolts behind each reflector (reflectors must be removed), and 6 bolts on the bottom of the bumper. The steel bumper beam and its fasteners are then removed and returned to the vehicle owner.
Yes. After the hitch is installed on the vehicle, you must mark the bumper fascia and trim it until it fits back onto the vehicle without interfering with the hitch. This is a required modification. Use a utility knife for trimming.
All M12 fasteners must be torqued to 82 lb-ft. This applies to the 12 fasteners (8 nuts and 8 washers) that secure the hitch to the vehicle.
All non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. This applies to any load that is not a trailer.
Do not exceed your vehicle manufacturer's recommended towing capacity. Although the hitch has a gross load capacity of 6,000 lbs. trailer weight and 600 lbs. tongue weight, your BMW X6 or X6M may have a lower maximum towing capacity. Always refer to your vehicle's owner's manual for the final towing limit.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is a routine maintenance requirement to keep the hitch safe and functional.
Yes, the Curt 13114 is designed for BMW X6 and X6M models. Installation requires removal of the lower bumper fascia and bumper, and trimming of the bumper fascia.
No, drilling is not required. The hitch uses existing mounting points on the vehicle after bumper removal.
Yes, the bumper fascia must be trimmed after the hitch is installed to ensure it fits without interfering with the hitch.
Torque all M12 fasteners to 82 lb-ft.
The hitch has a gross load capacity of 6,000 lbs. trailer weight and 600 lbs. tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
All non-trailer loads must be supported by auxiliary stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $551.85. Current price is $536.18.You save $15.67
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 16 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.