2009-2013 Subaru Forester All Class 2 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $389.85. Current price is $292.92.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2009 - 2013 Honda Fit
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2009-2013 Honda Fit All
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Honda Fit (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2009, 2010, 2011, 2012, 2013 Honda Fit All Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Honda Fit
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2009 - 2013 | Honda Fit | — |
The 2009-2013 Honda Fit All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110643-001) fits the following vehicles: 2009-2013 Honda Fit. Always verify your specific year, make, and model before ordering.
The 2009-2013 Honda Fit All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110643-001) fits 2009-2013 Honda Fit models. The 2013 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2009-2013 Honda Fit All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110643-001) is designed to fit the 2009-2013 Honda Fit.
The 2009-2013 Honda Fit All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110643-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 11064 is designed specifically for the Honda Fit. It is designed for use with Ballmount #55001 / 45501.
The manual specifies a gross load capacity of 2,000 lbs. trailer weight and 200 lbs. tongue weight when used as a weight carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Non-trailer loads can be applied to this hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
You will need: a 3/4" socket, 12" extension, ratchet, torque wrench, 17/32" drill bit, drill, carbide bit, and rotary tool. The carbide bit and rotary tool are required for the hole modification step.
Yes, drilling is required. You must drill a 17/32" diameter hole in the driver side frame rail and then modify it using a carbide bit and rotary tool to accommodate the 1/2-13 carriage bolt and CM-SP6 spacer.
Fishwire hardware is used to secure the hitch at two locations: the passenger side bumper beam mount and the driver side frame rail. The manual references a 'Reverse Pull Fishwire Technique' for installation, though the detailed technique is not fully described in the provided manual text.
Yes. In Step 2, you must bend the 1/2" handle nuts before inserting them into the trunk pan mount on the bottom of the spare tire well. In Step 7, after raising the hitch into place, you must trim the handles off the handle nuts.
All hardware must be torqued to 110 lb-ft. This is the final torque specification after the hitch is fully assembled and in place.
The parts list includes: 2 carriage bolts (1/2-13 x 1 3/4"), 1 CM-SP53 spacer, 2 handle nuts (1/2-13), 2 conical toothed washers (1/2"), 2 hex bolts (1/2-13 x 1 1/4"), 2 CM-SP19 spacers, 2 hex flange nuts (HFN 1213), and 2 pieces of 1/2" fishwire.
1. Reverse fishwire a carriage bolt and CM-SP53 spacer into the passenger side bumper beam mount access hole. 2. Bend and insert handle nuts into the trunk pan mount. 3. Raise the hitch and secure with flange nut and carriage bolt; install hex bolts into handle nuts (finger tighten only). 4. Mark the center of the hole in the driver side arm using the hitch as a template, then lower the hitch. 5. Drill the marked hole with a 17/32" bit and modify it with a carbide bit and rotary tool. 6. Reverse fishwire a carriage bolt and CM-SP6 spacer into the drilled/modified hole. 7. Raise the hitch and secure with supplied hardware; trim handle nut handles. 8. Torque all hardware to 110 lb-ft.
In Step 3, the hex bolts inserted into the handle nuts are finger-tightened only to allow the hitch to be positioned correctly for marking the driver side hole. All fasteners are then torqued to 110 lb-ft in Step 8 after the hitch is fully assembled and in its final position.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This helps maintain the integrity and safety of the installation.
The manual explicitly states: 'DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.' While the hitch itself has a 2,000 lbs. trailer weight capacity, your vehicle's manufacturer may specify a lower limit. You must follow the vehicle manufacturer's recommendation, not the hitch capacity.
Yes, the Curt 11064 is designed for the Honda Fit and is designed for use with Ballmount #55001 / 45501.
You need a 3/4" socket, 12" extension, ratchet, torque wrench, 17/32" drill bit, drill, carbide bit, and rotary tool.
All hardware must be torqued to 110 lb-ft after the hitch is fully assembled and in place.
The hitch has a 2,000 lbs. trailer weight and 200 lbs. tongue weight capacity, but you must not exceed your vehicle manufacturer's recommended towing capacity.
Yes. All non-trailer loads must be supported by auxiliary stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $378.85. Current price is $285.92.You save $92.93 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.