Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2009-2016 Hyundai Genesis Sedan
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Hyundai Genesis (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 Hyundai Genesis Sedan Class 2 Trailer Hitch, 1-1/4" Ball Mount, Select Hyundai Genesis
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2009 - 2016 | Hyundai Genesis | Sedan |
Yes, the 2009-2016 Hyundai Genesis Sedan Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-120863-001) is designed to fit the 2009-2016 Hyundai Genesis.
The 2009-2016 Hyundai Genesis Sedan Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-120863-001) fits 2009-2016 Hyundai Genesis models. The 2016 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2009-2016 Hyundai Genesis Sedan Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-120863-001) fits the following vehicles: 2009-2016 Hyundai Genesis. Always verify your specific year, make, and model before ordering.
The 2009-2016 Hyundai Genesis Sedan Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-120863-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The hitch weight specification is not provided in the manual. Contact Curt Manufacturing Inc. for this specification.
The manual does not provide the gross load capacity or tongue weight specifications for this hitch. Contact Curt Manufacturing Inc. for these ratings. However, the manual emphasizes: do not exceed your vehicle manufacturer's recommended towing capacity.
Curt 120863 is designed for the 2012 Hyundai Genesis. The manual does not confirm fitment for other model years. Verify your vehicle year before purchasing.
The manual specifies fitment for 2012 Hyundai Genesis only. Compatibility with 2011 or other model years is not stated in the manual. Contact Curt Manufacturing or a fitment database to confirm.
Curt 120863 is designed for use with ball mount D-55001. Euro mount options are available: part number 45571 (1-7/8" ball) and 45572 (2" ball).
Required tools: drill with 17/32" drill bit, ratchet, 10mm socket, 19mm socket, 3/4" socket, torque wrench, aviator shears, and pencil or marker.
The kit includes: 4× carriage bolts (1/2-13 x 1 3/4"), 4× square hole spacers (CM-SP6, .250 x 1.00 x 3.00"), 4× hex flange nuts (HFN 1213), and 2× 1/2" fishwire.
Yes. On 2012 models, remove 2 nuts (19mm socket) in front of mufflers on each side, remove 4 rear rubber exhaust isolators, and gently lower the exhaust. The exhaust is reinstalled after hitch installation.
Yes. Remove heat shields by removing 6 screws (10mm socket) on both sides before drilling. The heat shields are then modified and reinstalled with original fasteners after hitch installation.
Yes, a 2-person install is recommended.
Yes. You must drill 4 holes using a 17/32" drill bit for 1/2" fasteners. The hitch is positioned, centered, and squared to the frame rails just after the frame angles downward before marking and drilling.
Use a 17/32" drill bit to drill 4 holes for the 1/2" fasteners.
Remove rubber isolators from both heat shields using aviator shears. The diagram shows the modification required. Reinstall the modified heat shields with original fasteners after the hitch is installed and the exhaust is raised.
Torque all 1/2" fasteners to 110 lb-ft.
The hitch uses 1/2" fasteners: 4× carriage bolts (1/2-13 x 1 3/4"), 4× hex flange nuts (HFN 1213), and 4× square hole spacers (.250 x 1.00 x 3.00").
1. Remove exhaust nuts (19mm socket), 4 rubber isolators, and lower exhaust. Remove 6 heat shield screws (10mm socket) on both sides. 2. Raise hitch into position, center and square to frame rails just after frame angles downward. Mark and drill 4 holes (17/32" bit). 3. Lower hitch and fishwire bolts and spacers into position. 4. Raise hitch and install hex flange nuts. Torque all 1/2" fasteners to 110 lb-ft. 5. Modify heat shields, reinstall with original fasteners, raise exhaust, reinstall 4 rubber isolators, and bolt exhaust back together.
Raise the hitch into position, center it, and square it to the frame rails. Position it just after the frame angles downward. Then mark and drill the 4 holes.
Fishwire (2 pieces included) is used to temporarily hold the bolts and spacers in position while the hitch is raised back into place. After drilling, lower the hitch and fishwire the bolts and spacers into position as shown in the diagrams, then raise the hitch and install the hex flange nuts.
The manual does not specify a tightening sequence. Torque all 1/2" fasteners to 110 lb-ft after the hitch is raised into position and all nuts are installed.
Do not exceed your vehicle manufacturer's recommended towing capacity. The manual does not specify the Genesis towing limit. Consult your vehicle owner's manual or Hyundai for the maximum towing capacity.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is a routine maintenance requirement.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify an exact interval; perform checks regularly as part of vehicle maintenance.
On Sale Today
Original price was $462.85. Current price is $340.92.You save $121.93 (26%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.