Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2010-2013 Kia Forte Sedan
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Kia Forte (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2010, 2011, 2012, 2013 Kia Forte Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Kia Forte
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2010 - 2013 | Kia Forte | Sedan |
The 2010-2013 Kia Forte Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-114343-001) fits 2010-2013 Kia Forte models. The 2013 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2010-2013 Kia Forte Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-114343-001) fits the following vehicles: 2010-2013 Kia Forte. Always verify your specific year, make, and model before ordering.
Yes, the 2010-2013 Kia Forte Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-114343-001) is designed to fit the 2010-2013 Kia Forte.
The 2010-2013 Kia Forte Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-114343-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 11434 is designed for the Kia Forte. It is a receiver hitch that mounts to the existing vehicle tow loop and frame rail weldnuts, requiring no drilling.
The Curt 11434 is designed for use with ballmount #55001 or #45501.
The manual specifies a gross load capacity when used as a weight-carrying hitch, but the specific trailer weight and tongue weight values are not printed in this copy of the manual. Contact Curt Manufacturing technical support at 1-800-798-0813 for the exact capacity, and always verify that your vehicle's towing capacity is not exceeded.
You will need a socket wrench, torque wrench, 3/4 inch socket, and 17 mm socket.
The kit includes: one 1/2-13 x 1 3/4 inch carriage bolt, one CM-SP4 square hole spacer (0.250 x 1.50 x 3.00 inches), one 1/2-13 hex flange nut, four 3/8 inch conical toothed washers, and four M10-1.25 x 25 hex bolts.
No. The manual states "NO DRILLING REQUIRED." The hitch uses existing weldnuts on both frame rails and the existing vehicle tow loop.
Yes. The exhaust must be lowered during installation. Step 1 requires removing two rubber isolators from the exhaust to lower it for ease of installation. The rear isolator is removed from the single exhaust hanger attached to the vehicle. After the hitch is installed and positioned, the exhaust is raised back into position in Step 7.
1. Lower the exhaust by removing two rubber isolators. 2. Install the 1/2 inch carriage bolt and CM-SP4 spacer through the top of the existing vehicle tow loop. 3. Raise the hitch into position over the exhaust. 4. Loosely install the 1/2 inch hex flange nut onto the carriage bolt. 5. Loosely secure the hitch with M10-1.25 hex bolts and 3/8 inch conical toothed washers through the existing weldnuts in the outside of the frame rails. 6. Torque the fasteners to specification. 7. Raise the exhaust back into position.
The M10-1.25 hex bolts must be torqued to 48 lb-ft.
The 1/2 inch hardware (carriage bolt and hex flange nut) must be torqued to 110 lb-ft.
Non-trailer loads may be applied to the hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch has a specified gross load capacity, but your vehicle's capacity is the limiting factor. Consult your vehicle's owner manual for the maximum towing weight.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify an exact interval, so regular visual inspection before each use is recommended.
Yes, the Curt 11434 is designed for the Kia Forte and uses existing tow loop and frame rail weldnuts with no drilling required.
You need a socket wrench, torque wrench, 3/4 inch socket, and 17 mm socket.
No, no drilling is required. The hitch mounts to existing weldnuts on the frame rails and the existing vehicle tow loop.
Torque the M10-1.25 hex bolts to 48 lb-ft and the 1/2 inch hardware to 110 lb-ft.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch capacity is specified but not fully printed in this manual; contact Curt at 1-800-798-0813 for exact values.
On Sale Today
Original price was $451.85. Current price is $333.92.You save $117.93 (26%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.