2010-2014 Volkswagen GTI All Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $378.85. Current price is $285.92.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2010 - 2014 Volkswagen Golf
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2010-2014 Volkswagen Golf All
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Volkswagen Golf and GTI (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45016, installation hardware, pin & clip
2010, 2011, 2012, 2013, 2014 Volkswagen Golf All Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Volkswagen Golf, GTI
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494One-Year Limited
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2010 - 2014 | Volkswagen Golf | — |
The 2010-2014 Volkswagen Golf All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110003-002) fits 2010-2014 Volkswagen Golf models. The 2014 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2010-2014 Volkswagen Golf All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110003-002) is designed to fit the 2010-2014 Volkswagen Golf.
The 2010-2014 Volkswagen Golf All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110003-002) fits the following vehicles: 2010-2014 Volkswagen Golf. Always verify your specific year, make, and model before ordering.
The 2010-2014 Volkswagen Golf All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110003-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 29143 is designed for Volkswagen Golf, GTI, and Rabbit models from 2006 to current, including TDI variants. Confirm your vehicle matches these specifications before purchasing.
Yes, this hitch is designed for Volkswagen Rabbit models from 2006 to current, so a 2010 model is compatible.
Yes, this hitch is compatible with Volkswagen Golf TDI models. The manual specifically states it is designed for Golf, GTI, and Rabbit including TDI from 2006-current.
This hitch has a gross load capacity of 11,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The tongue weight capacity is 200 lbs. Do not exceed your vehicle manufacturer's recommended towing capacity.
You will need: a ratchet, a 9-inch extension, a 3/4-inch socket, an 18mm socket, and a torque wrench. Safety glasses should be worn at all times during installation.
The hitch includes: 2 hex flange nuts (HFN 1213), 2 carriage bolts (1/2-13 x 2"), 2 square hole spacers (CM-SP10, .250 x 1.00 x 2.50"), and 2 pieces of 1/2" fishwire. You will also reuse the existing M12 bolts removed from your vehicle during installation.
No, drilling is not required. This hitch uses existing access holes in the frame rails and the fishwire hardware technique to secure the hitch without drilling.
Two people may be required to ease installation. The manual recommends reading all instructions thoroughly before beginning and notes that using proper tools will greatly improve the quality of the install and reduce the time required.
The installation is rated as Easy to Moderate difficulty. The manual notes that the installation time listed is for professional installers, and if you are hesitant to undertake this task on your own, you should contact an authorized CURT installer for additional assistance.
1. Remove existing M12 bolts from driver and passenger side frame rails and retain them. 2. Use the fishwire technique to reverse pull 1/2" carriage bolts and SP-10 spacers through access holes in the frame rails. 3. Raise the hitch into position, feeding fishwires through the hitch side plate holes. If needed to position the passenger side, loosen the exhaust hanger on the passenger side. 4. Reinstall the M12 bolts through the hitch and frame support. 5. Remove fishwires and install 1/2" flange nuts. 6. Torque all 1/2" hardware to 110 ft-lbs and all M12 bolts to 86 ft-lbs. 7. Re-tighten the exhaust hanger if loosened in step 3.
You do not need to remove the exhaust. However, if necessary to get the passenger side hitch into position, you may need to loosen the exhaust hanger on the passenger side to allow the exhaust bracket to move side to side. After installation is complete, re-tighten the exhaust hanger.
All 1/2" hardware (the carriage bolts and flange nuts) must be torqued to 110 ft-lbs.
All M12 bolts must be torqued to 86 ft-lbs.
Safety glasses should be worn at all times while installing this product. Additionally, never exceed your vehicle manufacturer's recommended towing capacity. All non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps; failure to properly support non-trailer loads will void the product warranty.
Yes, CURT strongly recommends the use of auxiliary stabilizing straps for all non-trailer (wheel-less) loads. All non-trailer loads must be supported by auxiliary stabilizing straps, and failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on stabilizing straps.
After installation, verify that the hitch is installed properly as shown in the installation walkthrough. Periodically check this receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing maintenance is critical to safe operation.
You should periodically check this receiver hitch to ensure all fasteners are tight and all structural components are sound. The manual does not specify an exact interval, but regular inspection is essential for safe towing.
This hitch is designed for use with ball mount part number D-224 / 45016.
CURT Manufacturing Inc. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration to, misuse, or improper installation of this product voids the warranty. CURT's liability is limited to repair or replacement of defective products and specifically excludes liability for incidental or consequential loss or damage.
Yes, CURT part 29143 fits Volkswagen Golf, GTI, and Rabbit (including TDI) from 2006 to current.
No, drilling is not required. The hitch uses existing frame access holes and fishwire hardware.
11,000 lbs trailer weight and 200 lbs tongue weight, but never exceed your vehicle manufacturer's recommended towing capacity.
Torque all 1/2" hardware to 110 ft-lbs and all M12 bolts to 86 ft-lbs.
Yes, all non-trailer loads must be supported by auxiliary stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $378.85. Current price is $285.92.You save $92.93 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 10 - Thu, Aug 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.