2011-2014 Dodge Avenger All Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $399.85. Current price is $299.92.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2011 - 2014 Dodge Avenger
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2011-2014 Dodge Avenger All
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Dodge Avenger and Chrysler 200 (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2011, 2012, 2013, 2014 Dodge Avenger All Class 1 Trailer Hitch, 1-1/4" Receiver, Select Dodge Avenger, Chrysler 200
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2014 | Dodge Avenger | — |
The 2011-2014 Dodge Avenger All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11133-002) fits the following vehicles: 2011-2014 Dodge Avenger. Always verify your specific year, make, and model before ordering.
Yes, the 2011-2014 Dodge Avenger All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11133-002) is designed to fit the 2011-2014 Dodge Avenger.
The 2011-2014 Dodge Avenger All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11133-002) fits 2011-2014 Dodge Avenger models. The 2014 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2011-2014 Dodge Avenger All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11133-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 11133 is designed for Chrysler 200, 200 Hard Top Convertible, and Dodge Avenger models from 2011 to current year. Make sure your hitch matches the vehicle photo and hitch illustration provided in the installation instructions before beginning.
Yes, CURT part number 11133 is compatible with Dodge Avenger models from 2011 to current year.
This is a weight-carrying hitch with a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
You will need: a ratchet, 3/4" socket, 3/4" boxed end wrench, torque wrench, and a pry bar. Using proper tools will greatly improve the quality of the installation and reduce the time required.
No, no drilling is required for this installation. The hitch uses fishwire hardware to thread through existing access holes in the frame rails.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance. You can reach CURT technical support at 877.287.8634.
Only if your vehicle has dual exhaust. For vehicles with dual exhaust, you must lower the exhaust by removing the four rear-most rubber isolators before installation. Wire may be used to hold the exhaust to prevent damage if lowered too far. Refer to the rubber isolator removal diagram in the installation instructions.
Fishwire is used to thread a 1/2" carriage bolt and CM-SP12 spacer into position through the access hole in each frame rail. The fishwire is then threaded through the appropriate mounting holes to raise the hitch into position. Leave fishwires attached to the hardware to prevent loss in the frame. Refer to the fishwire technique diagram in the installation instructions for detailed guidance.
All 1/2" hardware must be torqued to 110 ft-lbs. Use a torque wrench to ensure proper tightness.
The hitch includes: 2 hex head cap screws (HHCS) 1/2-13 UNC 4-1/2" grade 8 (part 10-10413), 2 round hole spacers 0.188 x 1.50 x 3.00" (CM-SP34), 2 carriage bolts 1/2-13 UNC 1-3/4" grade 8 (part 10-10272), 2 square hole spacers 0.250 x 1.00 x 2.00" (CM-SP12), 4 serrated flange nuts 1/2-13 UNC grade 8 (part 20-00062), and 2 pieces of 1/2" fishwire.
The manual states this hitch is designed for use with ballmount #45522. CURT also offers euro mount options #45591 (1 7/8" ball) and #45592 (2" ball) as alternatives. Consult CURT directly at 877.287.8634 or www.curtmfg.com for compatibility with other ball mounts.
Safety glasses must be worn at all times while installing this product. Read all instructions thoroughly before beginning installation. If you are hesitant to undertake this task, contact an authorized CURT installer.
All non-trailer loads (wheel-less loads) applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. CURT recommends the use of 18050 stabilizing straps for all non-trailer loads.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This regular inspection helps maintain the integrity and safety of the installation.
CURT Manufacturing Inc. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, CURT 11133 is designed for Chrysler 200, 200 Hard Top Convertible, and Dodge Avenger (2011-current).
2,000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
No, no drilling is required. The hitch uses fishwire hardware through existing frame rail access holes.
Ratchet, 3/4" socket, 3/4" wrench, torque wrench, and pry bar.
All 1/2" hardware must be torqued to 110 ft-lbs.
Yes, all non-trailer (wheel-less) loads must be supported by CURT 18050 stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $402.85. Current price is $307.60.You save $95.25 (24%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 23 - Sat, Sep 26
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.