Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2011-2016 BMW 535i Sedan
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the BMW 535i, 535i xDrive, 550i and 550i xDrive (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2011, 2012, 2013, 2014, 2015, 2016 BMW 535i Sedan Class 1 Hitch, 1-1/4" Receiver, Select BMW 535i, 535i xDrive, 550i, 550i xDrive
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2016 | BMW 535i | Sedan |
The 2011-2016 BMW 535i Sedan Class 1 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11381-002) fits 2011-2016 BMW 535i models. The 2016 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2011-2016 BMW 535i Sedan Class 1 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11381-002) fits the following vehicles: 2011-2016 BMW 535i. Always verify your specific year, make, and model before ordering.
Yes, the 2011-2016 BMW 535i Sedan Class 1 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11381-002) is designed to fit the 2011-2016 BMW 535i.
The 2011-2016 BMW 535i Sedan Class 1 Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11381-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT hitch 11381 is designed for BMW 5-Series Sedan models from 2011 to current. It is a weight-carrying hitch with a maximum trailer weight capacity of 2,000 lbs and tongue weight capacity of 200 lbs. Always verify your vehicle's manufacturer-recommended towing capacity before towing.
CURT 11381 is designed for use with ball mount #45521. Euro mount options #45571 (1 7/8" ball) and #45572 (2" ball) are also compatible.
CURT 11381 has a maximum trailer weight capacity of 2,000 lbs and a tongue weight capacity of 200 lbs. You must never exceed your vehicle manufacturer's recommended towing capacity.
Required tools include: ratchet with 6" extension, torque wrench, 3/4" and 13mm sockets, 10mm and 11mm sockets, power drill with 17/32" drill bit, plastic rivet removal tool, tin snips or aviation shears, masking tape, and safety goggles. Silicone caulk is also required.
Yes. You must remove the underbody panel that attaches the bumper cover to the trunk pan using a 10mm socket and plastic rivet remover. Save the panel for later reinstallation. After drilling and installing the hitch, trim the panel as required and reinstall it.
Clear the trunk pan of all contents and slide the battery towards the rear of the vehicle before drilling. After drilling and installation, slide the battery back into position and reinstall carpet and trunk contents.
Yes. You must drill two holes in the trunk pan using a 17/32" drill bit (for 1/2" fasteners). Drill from below the vehicle after using the tail bracket as a template to mark the trunk pan. The underbody panel must be trimmed as required after drilling.
Use a 17/32" drill bit to drill the two holes in the trunk pan for the 1/2" fasteners.
All 1/2" fasteners must be torqued to 110 lb-ft.
CURT 11381 includes: (4) 1/2"-13 UNC 1-1/4" carriage bolts (part 10-10278), (2) 1/2"-13 UNC 2" carriage bolts (part 10-10288), (6) 1/2"-13 UNC serrated flange nuts (part 20-00062), (2) .250 x 1.00 x 3.00" square hole spacers (part CM-SP6), (2) .250 x 1.50 x 3.00" square hole spacers (part CM-SP4), (2) .375 x 1.25 x 2.50" round hole spacers (part CM-SP55), (2) 1/2" fishwire, and (1) .500" tail bracket (part 11381-TB).
1. Remove the underbody panel using a 10mm socket and plastic rivet remover. 2. Fishwire (2) 1/2"-13 x 1-1/4" carriage bolts and (2) SP6 spacers into the existing bumper beam holes, raise the hitch into position, and loosely install the 1/2" hex flange nuts. 3. Temporarily install the tail bracket and use it as a template to mark the trunk pan drill holes. 4. Remove the tail bracket and drill both holes from below using a 17/32" drill bit. Reinstall the tail bracket with (2) 1/2"-13 x 1-1/4" carriage bolts and 1/2" hex flange nuts. 5. Apply silicone caulk to the SP4 spacers and remaining 1/2" carriage bolts, install into the trunk pan and tail bracket, and loosely install the remaining 1/2" hex flange nuts. 6. Torque all 1/2" fasteners to 110 lb-ft, trim the underbody panel as required, reinstall it, slide the battery back into position, and reinstall carpet and trunk contents.
The 1/2" hex flange nuts are installed loosely in steps 2 and 5 to allow for proper alignment and positioning of the hitch and tail bracket. All fasteners are then torqued to 110 lb-ft in the final step (step 6) after the hitch is properly positioned.
Silicone caulk is applied to the SP4 spacers and remaining 1/2" carriage bolts before they are installed into the trunk pan and tail bracket. This helps seal and protect the fasteners.
Push the bumper cover away from the bumper beam to access the existing holes in the bumper beam where the fishwire fasteners are installed.
All non-trailer (wheel-less) loads applied to CURT 11381 must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Safety glasses or safety goggles must be worn at all times while installing this product.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This helps maintain the integrity and safety of the installation.
Two people may be required to ease installation. The installation difficulty level is rated as moderate to challenging.
If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance. You can also call CURT technical support at 877-287-8634 for questions.
Yes, CURT 11381 is designed for BMW 5-Series Sedan models from 2011 to current, with a 2,000 lbs trailer weight and 200 lbs tongue weight capacity.
You need a ratchet with 6" extension, torque wrench, sockets (3/4", 13mm, 10mm, 11mm), power drill with 17/32" drill bit, plastic rivet removal tool, tin snips, masking tape, safety goggles, and silicone caulk.
Clear the trunk pan of all contents and slide the battery towards the rear of the vehicle before drilling. Remove the underbody panel using a 10mm socket and plastic rivet remover.
All 1/2" fasteners must be torqued to 110 lb-ft.
CURT 11381 has a maximum trailer weight capacity of 2,000 lbs and tongue weight capacity of 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $434.85. Current price is $423.07.You save $11.78
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.