Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2011-2021 Jeep Grand Cherokee Excluding SRT, SRT8, TrackHawk, and diesel
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Grand Cherokee WK2 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 7,500 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Uses pre-existing vehicle hardware for installation
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Jeep Grand Cherokee Excluding SRT, SRT8, TrackHawk, and diesel Class 3 Trailer Hitch, 2" Receiver, Select Jeep Grand Cherokee WK2
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2021 | Jeep Grand Cherokee | Excluding SRT, SRT8, TrackHawk, and diesel |
Yes, the 2011-2021 Jeep Grand Cherokee Excluding SRT, SRT8, TrackHawk, and diesel CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13065-002) is designed to fit the 2011-2021 Jeep Grand Cherokee.
The 2011-2021 Jeep Grand Cherokee Excluding SRT, SRT8, TrackHawk, and diesel CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13065-002) fits 2011-2021 Jeep Grand Cherokee models. The 2021 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2011-2021 Jeep Grand Cherokee Excluding SRT, SRT8, TrackHawk, and diesel CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13065-002) fits the following vehicles: 2011-2021 Jeep Grand Cherokee. Always verify your specific year, make, and model before ordering.
The 2011-2021 Jeep Grand Cherokee Excluding SRT, SRT8, TrackHawk, and diesel CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13065-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 13065 is designed for the 2011 Jeep Grand Cherokee SUV. Before installation, verify that your hitch matches the vehicle photo and hitch illustration provided in the manual to confirm correct fitment.
When used as a weight carrying hitch, the CURT 13065 supports a maximum trailer weight of 5,000 lbs. and tongue weight of 500 lbs. When used as a weight distribution hitch, it supports a maximum trailer weight of 7,500 lbs. and tongue weight of 750 lbs. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
The hitch weight is 10 lbs.
You will need a ratchet, a 21mm socket, and a torque wrench. A utility knife may also be needed if trimming of excess caulk is required on the vehicle frame rails.
No, drilling is not required. The hitch uses existing M14 bolt holes on the vehicle frame.
If your 2011 Jeep Grand Cherokee has a factory tow loop, you must remove it before installing the hitch. The tow loop will interfere with hitch installation.
Trimming of excess caulk on the vehicle frame rails may be required if it interferes with hitch installation. Use a utility knife to trim as needed. This is not a permanent modification to the vehicle structure.
1. Remove the four existing M14 bolts from the vehicle frame rails (both driver and passenger sides). These bolts will be reused for hitch installation. 2. Raise the hitch into position and reinstall the four M14 bolts. 3. Tighten all M14 hardware to 126 ft-lbs using a torque wrench. Trim excess caulk on the vehicle frame rails if it interferes with hitch installation.
All M14 hardware must be torqued to 126 ft-lbs.
Two people may be required to ease installation. While one person may be able to complete the installation, having a second person can make the process easier.
Safety glasses should be worn at all times while installing this product. Read all instructions thoroughly before beginning installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
After installation is complete, periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This ongoing inspection helps maintain the safety and integrity of the hitch.
You should periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify an exact interval, but regular inspection before towing is recommended.
The installation is rated as EASY. Professional installers typically complete the installation in 20 minutes, while a novice DIY installer should expect approximately 33 minutes.
You reuse the existing M14 bolts from your vehicle. The installation requires removing four existing M14 bolts from the vehicle frame rails and reinstalling them through the hitch. No additional bolts are required.
The manual indicates that weldnut cleaning may be required, but does not provide specific details on the cleaning procedure or when it is necessary. Contact CURT Technical Support at 877-287-8634 or 1-877-287-8637 for guidance on whether your vehicle requires weldnut cleaning and how to perform it.
Yes, the CURT 13065 is designed for the 2011 Jeep Grand Cherokee SUV. Verify fitment using the vehicle photo and hitch illustration in the manual.
You need a ratchet, 21mm socket, and torque wrench. A utility knife may be needed to trim excess caulk.
No, drilling is not required. The hitch uses existing M14 bolt holes on the vehicle frame.
All M14 bolts must be torqued to 126 ft-lbs using a torque wrench.
Weight carrying mode: 5,000 lbs. trailer weight, 500 lbs. tongue weight. Weight distribution mode: 7,500 lbs. trailer weight, 750 lbs. tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Wear safety glasses at all times during installation. Read all instructions thoroughly before beginning. If hesitant, contact an authorized CURT installer.
On Sale Today
Original price was $362.85. Current price is $277.71.You save $85.14 (23%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.