Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2011-2025 Ram 3500 Excluding factory receiver or cab & chassis
Whatever the next item is on your to-do list -- whether it's arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset -- CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Ram 2500 or 3500 and Dodge Ram 1500, 2500 or 3500 (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2" receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 Ram 3500 Excluding factory receiver or cab & chassis Class 4 Trailer Hitch, 2" Receiver, Select Dodge, Ram 1500, 2500, 3500
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2025 | Ram 3500 | Excluding factory receiver or cab & chassis |
The 2011-2025 Ram 3500 Excluding factory receiver or cab & chassis CURT Class 4 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-14361-002) fits 2011-2025 Ram 3500 models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2011-2025 Ram 3500 Excluding factory receiver or cab & chassis CURT Class 4 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-14361-002) fits the following vehicles: 2011-2025 Ram 3500. Always verify your specific year, make, and model before ordering.
Yes, the 2011-2025 Ram 3500 Excluding factory receiver or cab & chassis CURT Class 4 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-14361-002) is designed to fit the 2011-2025 Ram 3500.
The 2011-2025 Ram 3500 Excluding factory receiver or cab & chassis CURT Class 4 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-14361-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the 14361 receiver hitch fits both short bed and long bed Dodge Ram pick-ups. However, you must use the correct frame hole for your bed length: use the forward hole for short bed models and the rearward hole for long bed models (both sides). The hitch also accommodates 1500, 2500, and 3500 Ram models, each with a specific frame hole location.
The Curt 14361 is designed for Dodge Ram 1500, 2500, and 3500 pick-up models. Each model uses a different frame hole location during installation. Refer to the installation diagram to identify the correct hole for your specific model.
The 14361 has a gross load capacity of 10,000 lbs trailer weight and 1,000 lbs tongue weight when used as a weight-carrying hitch, and 12,000 lbs trailer weight and 1,200 lbs tongue weight when used as a weight-distribution hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
The hitch weight is 56 lbs.
No, drilling is not required. The installation uses existing frame holes and tow loop attachment points on your Dodge Ram.
The kit includes: 4 hex bolts (1/2-13 UNC, Grade 8, zinc-plated), 2 square hole spacers (0.250 x 1.50 x 3.00"), 2 square hole spacers (0.250 x 2.13 x 2.13"), 2 hex head cap screws (1/2-13 UNC, 2-1/4", Grade 8), 2 flat washers (1/2"), 4 round hole spacers (0.188 x 1.50 x 3.00"), 1 length of 1/2" fishwire, 2 round hole spacers (0.188 x 1.50 x 2.00"), and 6 serrated flange nuts (1/2-13 UNC, Grade 8, zinc-plated).
Fishwiring is a technique used to route fasteners through frame access slots where direct access is not available. For the 14361, you use the included 1/2" fishwire to guide the forward-most carriage bolts into position through the frame rail access slots. The rearward carriage bolts are inserted directly through the bumper beam and frame hole.
All 1/2" fasteners must be torqued to 110 lb-ft. This applies to the hex bolts, hex head cap screws, and flange nuts used in the installation.
1. Raise the hitch into position, aligning holes in the hitch to the correct frame holes (forward hole for short bed, rearward hole for long bed; use the appropriate hole for your Ram model: 1500, 2500, or 3500). 2. Insert hex bolts through side plates and into tow loops, using spacers as needed between hitch and tow loop. Install the outer spacer and flange nut on both sides. 3. Slide square hole spacers into place through the frame rail end access slots. Use the fishwire to guide the forward-most carriage bolts into position through the frame access slots. Insert the rearward carriage bolts directly through the bumper beam and frame hole. 4. Install remaining hex flange nuts and torque all 1/2" fasteners to 110 lb-ft.
Spacers are used to maintain proper alignment and spacing between the hitch side plates and the tow loop attachment points. Round hole spacers (0.188 x 1.50 x 3.00" and 0.188 x 1.50 x 2.00") are installed as needed between the hitch and tow loop when inserting hex bolts. Square hole spacers (0.250 x 1.50 x 3.00" and 0.250 x 2.13 x 2.13") are slid into place through the end of the frame rails to support the carriage bolts.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify an interval, so regular visual inspection before towing is recommended.
The Curt Manufacturing warranty covers the hitch itself and is limited to repair or replacement of defective products. However, alteration, misuse, or improper installation of the hitch voids the Curt warranty. Whether installation affects your vehicle manufacturer's warranty is not addressed in this manual and should be confirmed with your vehicle dealer.
The 14361 fits Dodge Ram 1500, 2500, and 3500 pick-ups in both short bed and long bed configurations. Use the correct frame hole for your bed length and model during installation.
No drilling is required. The hitch uses existing frame holes and tow loop attachment points.
All 1/2" fasteners must be torqued to 110 lb-ft.
Weight-carrying: 10,000 lbs trailer, 1,000 lbs tongue. Weight-distribution: 12,000 lbs trailer, 1,200 lbs tongue. Do not exceed your vehicle manufacturer's recommended towing capacity.
The manual does not specify required tools. Fishwiring (routing fasteners through frame access slots using wire) is required, and the 1/2" fishwire is included in the kit.
On Sale Today
Original price was $603.85. Current price is $435.71.You save $168.14 (28%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Aug 21 - Mon, Aug 24
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.