Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2012-2015 Mercedes-Benz ML350 Excluding Diesel
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Mercedes-Benz ML350, GLE350 and GME43 AMG (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 7,000 lbs. GTW and 700 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 7,000 lbs. WD and 700 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2012, 2013, 2014, 2015 Mercedes-Benz ML350 Excluding Diesel Class 3 Hitch, 2", Select Mercedes-Benz ML350, GLE350, GLE43 AMG (WD Compatible)
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 - 2015 | Mercedes-Benz ML350 | Excluding Diesel |
Yes, the 2012-2015 Mercedes-Benz ML350 Excluding Diesel CURT Class 3 Hitch, 2" (Part #CHD-13411-003) is designed to fit the 2012-2015 Mercedes-Benz ML350.
The 2012-2015 Mercedes-Benz ML350 Excluding Diesel CURT Class 3 Hitch, 2" (Part #CHD-13411-003) fits the following vehicles: 2012-2015 Mercedes-Benz ML350. Always verify your specific year, make, and model before ordering.
The 2012-2015 Mercedes-Benz ML350 Excluding Diesel CURT Class 3 Hitch, 2" (Part #CHD-13411-003) fits 2012-2015 Mercedes-Benz ML350 models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2012-2015 Mercedes-Benz ML350 Excluding Diesel CURT Class 3 Hitch, 2" (Part #CHD-13411-003) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT hitch 13411 is designed for 2012–2018 Mercedes-Benz ML350, GLE350, and GLE43 AMG crossovers. Verify your vehicle year and model match before purchasing.
Yes, CURT hitch 13411 fits 2012–2018 Mercedes-Benz GLE350 and GLE43 AMG models.
When used as a weight-carrying hitch, the maximum trailer weight is 7,000 lbs. and tongue weight is 700 lbs. When used as a weight-distribution hitch, the maximum trailer weight is 7,000 lbs. and tongue weight is 700 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
The hitch weight is 40 lbs.
Required tools are: ratchet, torque wrench, 10mm socket, 13mm socket, 16mm socket, 3/4" socket, 6" socket extension, E10 external Torx bit, 3/4" boxed end wrench, aviator shears, marker, and safety glasses. Using proper tools will greatly improve installation quality and reduce installation time.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Professional installation time is approximately 80 minutes. Novice (DIY) installation time is approximately 31–40 minutes, depending on experience and familiarity with the vehicle.
No, drilling is not required. The installation notes explicitly state "NO DRILLING REQUIRED."
Yes, the exhaust heat shield must be trimmed and bent as needed to clear the hitch. Step 3 of the installation instructions states: "Trim the heat shield as needed and bend the center of the heat shield as needed to clear hitch." A reference diagram is provided in the manual. You will also need to trim caulking around the lower bumper studs as needed in step 4.
Three factory bumper brackets must be removed from the rear bulkhead. Step 1 requires removing (4) screws holding the lower bumper fascia to (3) brackets, then removing the (3) brackets using a 10mm socket. The outer brackets have (2) metal nuts each and the inner bracket has (1) plastic nut. These brackets should be returned to the vehicle owner. The (2) external Torx screws from the exhaust heat shield must also be removed in step 2, and (4) M10 nuts from the lower bumper beam studs must be removed in step 4.
Installation follows this sequence: (1) Remove (4) screws and (3) bumper brackets from the rear bulkhead. (2) Remove (2) external Torx screws from the exhaust heat shield. (3) Trim and bend the heat shield as needed. (4) Remove (4) M10 nuts from the lower bumper beam studs and trim caulking. (5) Raise the main weldment (13411-MBWA) into position and loosely reinstall the (4) M10 nuts and (2) M8 screws. (6) Place the Tail Bracket clamp plate (13411-TBC) between the rear differential and cross member, then raise the Tail Bracket Weldment (13411-TBWA) into position and loosely install the 1/2" fasteners. (7) Torque fasteners in the specified order. (8) Remove clip nuts from the (3) bumper brackets and install onto the hitch tabs, then reinstall the (4) screws.
Torque fasteners in the following order: M8 fasteners to 25 lb-ft, M10 fasteners to 38 lb-ft, and 1/2" fasteners to 110 lb-ft. All fasteners must be loosely installed first, then torqued in this sequence.
M8 fasteners must be torqued to 25 lb-ft.
M10 fasteners must be torqued to 38 lb-ft.
1/2" fasteners must be torqued to 110 lb-ft.
The hitch assembly includes: (1) Main Weldment Assembly (13411-MBWA), (1) Tail Bracket Clamp (13411-TBC), (1) Tail Bracket Welding Assembly (13411-TBWA), (2) Bolts 1/2-13 UNC 3" Grade 8 (10-10290), (2) Bolts 1/2-13 UNC 1-1/4" Grade 8 (10-10278), and (4) Serrated Flange Nuts 1/2-13 UNC Grade 8 (20-00062).
Safety glasses must be worn at all times while installing this product. Before you begin installation, read all instructions thoroughly. Never exceed your vehicle manufacturer's recommended towing capacity.
Periodically check this receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing maintenance is critical to safe operation.
The manual states to periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound, but does not specify an exact interval. Regular inspection before towing is recommended.
Yes, CURT 13411 is designed for 2012–2018 Mercedes-Benz ML350, GLE350, and GLE43 AMG crossovers.
Maximum trailer weight is 7,000 lbs. and tongue weight is 700 lbs. (both weight-carrying and weight-distribution modes). Never exceed your vehicle manufacturer's recommended towing capacity.
No drilling is required. Heat shield trimming and bending are required.
Required tools: ratchet, torque wrench, 10mm/13mm/16mm/3/4" sockets, 6" socket extension, E10 Torx bit, 3/4" boxed end wrench, aviator shears, marker, and safety glasses.
Professional installation: approximately 80 minutes. Novice (DIY): approximately 31–40 minutes.
M8 fasteners: 25 lb-ft. M10 fasteners: 38 lb-ft. 1/2" fasteners: 110 lb-ft.
Wear safety glasses at all times. Read all instructions before beginning. Never exceed your vehicle manufacturer's recommended towing capacity.
Periodically check that all fasteners are tight and all structural components are sound.
On Sale Today
Original price was $567.85. Current price is $411.71.You save $156.14 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 23 - Wed, Aug 26
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.