Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2012-2016 Subaru Impreza Hatchback, excluding WRX and WRX STi
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Subaru Impreza and XV Crosstrek (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2012, 2013, 2014, 2015, 2016 Subaru Impreza Hatchback, excluding WRX and WRX STi Class 1 Trailer Hitch, 1-1/4" Receiver, Select Subaru Impreza, XV Crosstrek
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 - 2016 | Subaru Impreza | Hatchback, excluding WRX and WRX STi |
The 2012-2016 Subaru Impreza Hatchback, excluding WRX and WRX STi Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11286-002) fits the following vehicles: 2012-2016 Subaru Impreza. Always verify your specific year, make, and model before ordering.
Yes, the 2012-2016 Subaru Impreza Hatchback, excluding WRX and WRX STi Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11286-002) is designed to fit the 2012-2016 Subaru Impreza.
The 2012-2016 Subaru Impreza Hatchback, excluding WRX and WRX STi Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11286-002) fits 2012-2016 Subaru Impreza models. The 2016 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2012-2016 Subaru Impreza Hatchback, excluding WRX and WRX STi Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11286-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 11286 receiver hitch is designed for Subaru Impreza 5-door and (XV) Crosstrek models from 2012 to current. It is designed for single exhaust systems. If your vehicle has dual exhaust, you should verify fitment with Curt technical support at 877.287.8634 before purchasing.
The Curt 11286 is designed for use with ballmount #D-55001 or #45501. A Euro mount option is also available with either a 1 7/8" ball (#45571) or 2" ball (#45572). These ballmounts are sold separately.
The Curt 11286 has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The hitch weight is not specified in the installation manual. Contact Curt Manufacturing at 877.287.8634 or visit www.curtmfg.com for this specification.
Required tools are: 3/8" drive ratchet, 11/16" and 3/4" sockets (3/8" drive), 3/8" drive torque wrench, and a die grinder with rasp bit for hole enlargement. Safety glasses must be worn at all times during installation.
Two people may be required to ease installation. The manual notes that using proper tools will greatly improve the quality of the install and reduce the time required. If you are hesitant to undertake this task on your own, contact an authorized Curt installer for assistance at 877.287.8634.
The installation manual does not specify whether the battery must be disconnected. Contact Curt technical support at 877.287.8634 for guidance on this step.
Yes, hole enlargement is required. The manual states "hole enlargement required" and instructs you to "enlarge access hole as necessary" when fishwiring the carriage bolts and spacers into position. A die grinder with rasp bit is required for this work. The exact amount of enlargement needed is not specified and will depend on your vehicle's frame configuration.
The installation sequence is: (1) Remove the 4 plugs in the frame rails and discard (leave center plugs in). (2) Fishwire the 7/16" carriage bolts and spacers into position first, then reverse fishwire the 1/2" carriage bolts and spacers into position afterward, enlarging the access hole as necessary. (3) Raise the hitch to the frame, aligning the holes in the hitch with the bolts. Use 1.50" x 2.00" spacers to level the hitch as necessary. Be careful not to push the bolts in the frame. (4) Install remaining supplied hardware. (5) Torque all 7/16" fasteners to 70 lb-ft and all 1/2" fasteners to 110 lb-ft.
Fishwire fasteners are included in the kit (7/16" fishwire and 1/2" fishwire) and are used to guide carriage bolts and spacers into position through the frame rails before the hitch is raised into place. The installation sequence requires you to fishwire the 7/16" carriage bolts and spacers into position first, then reverse fishwire the 1/2" carriage bolts and spacers into position afterward. You may need to enlarge the access hole as necessary to fit the fasteners through.
Three types of spacers are included: (1) .250 x 1.00 x 3.00" square hole spacers (CM-SP6, qty 2), (2) .250 x 1.00 x 2.50" square hole spacers (CM-SP11, qty 2), and (3) .250 x 1.50 x 2.00" round hole spacers (CM-SP16, qty 2). The 1.50" x 2.00" round hole spacers are used to level the hitch on the vehicle during installation. The square hole spacers are fishwired into position along with the carriage bolts before the hitch is raised.
Torque all 7/16" fasteners to 70 lb-ft and all 1/2" fasteners to 110 lb-ft. Use a 3/8" drive torque wrench to achieve these specifications.
The kit includes: (1) Two 1/2-13 UNC carriage bolts, 1-1/2" long, grade 8, zinc-plated (part 10-10287), (2) Two 7/16-14 UNC carriage bolts, 1-1/2" long, grade 8, zinc-plated (part 10-10282), (3) Two 1/2-13 UNC serrated flange nuts, grade 8, zinc-plated (part 20-00062), and (4) Two 7/16-14 UNC serrated flange nuts, grade 8, zinc-plated (part 20-00103). All fasteners are included in the kit.
After installation, periodically check that all fasteners are tight and that all structural components are sound. The manual recommends checking the hitch regularly to ensure it remains in safe working condition. If any fasteners are loose or components are damaged, tighten or repair them before using the hitch.
The manual states to "periodically check this receiver hitch to ensure that all fasteners are tight and that all structural components are sound." It does not specify an exact interval. For safety, inspect the hitch before each towing trip and at regular intervals during the towing season.
You must never exceed your vehicle manufacturer's recommended towing capacity. Although the Curt 11286 has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight, your Subaru Impreza or Crosstrek may have a lower manufacturer-recommended limit. Check your vehicle's owner's manual or contact your Subaru dealer to confirm the maximum towing capacity for your specific model year and configuration.
Yes. Curt recommends the use of 18050 stabilizing straps for all non-trailer (wheel-less) loads. For further information about these straps, see the Curt catalog or visit www.curtmfg.com.
Yes, the Curt 11286 is designed for Subaru Impreza 5-door and (XV) Crosstrek models from 2012 to current with single exhaust systems.
The hitch supports 2,000 lbs trailer weight and 200 lbs tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
You need a 3/8" drive ratchet, 11/16" and 3/4" sockets, 3/8" drive torque wrench, and a die grinder with rasp bit for hole enlargement. Safety glasses are required.
Yes, hole enlargement is required. A die grinder with rasp bit is needed to enlarge the frame rail access holes as necessary to fit the carriage bolts and spacers.
Two people may be required to ease installation. If you are hesitant, contact an authorized Curt installer at 877.287.8634.
Never exceed your vehicle manufacturer's recommended towing capacity. The hitch supports 2,000 lbs trailer weight and 200 lbs tongue weight, but your Subaru's limit may be lower.
Periodically check that all fasteners are tight and all structural components are sound before and during use.
On Sale Today
Original price was $382.85. Current price is $294.60.You save $88.25 (23%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.