Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2012-2023 Chrysler 300 S
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Chrysler 300, Dodge Challenger and Dodge Charger (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45520, installation hardware, pin & clip
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Chrysler 300 S Class 2 Hitch, 1-1/4" Ball Mount, Select Chrysler 300, Dodge Challenger, Charger
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 - 2023 | Chrysler 300 | S |
The 2012-2023 Chrysler 300 S Class 2 Hitch, 1-1/4" Ball Mount (Part #CHD-120643-002) fits 2012-2023 Chrysler 300 models. The 2023 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2012-2023 Chrysler 300 S Class 2 Hitch, 1-1/4" Ball Mount (Part #CHD-120643-002) is designed to fit the 2012-2023 Chrysler 300.
The 2012-2023 Chrysler 300 S Class 2 Hitch, 1-1/4" Ball Mount (Part #CHD-120643-002) fits the following vehicles: 2012-2023 Chrysler 300. Always verify your specific year, make, and model before ordering.
The 2012-2023 Chrysler 300 S Class 2 Hitch, 1-1/4" Ball Mount (Part #CHD-120643-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 12064 is designed for 2011-present Dodge Charger, Chrysler 300C, and Chrysler 300S sedans and coupes. The installation procedure is the same for 2011-2014 models, though they use existing weldnuts on the frame that 2015 and later models do not have.
Yes, Curt part number 12064 fits 2015 and newer Chrysler 300C models. The main difference is that 2015 models do not have existing weldnuts on the frame; instead, you will fishwire 3 carriage bolts on the passenger side rather than 2, and the installation uses different mounting points.
Yes, Curt 12064 is compatible with both V6 and V8 models. The installation differs only in how the driver side muffler is reattached: V6 models use a single clamp with a nut, while V8 models use two nuts with springs. All other installation steps are identical.
Curt 12064 has a gross load capacity of 3,500 lbs trailer weight and 350 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Required tools are: ratchet, torque wrench, 6-inch socket extension, socket universal joint, 13mm socket, 15mm socket, 19mm socket, and 3/4-inch socket. A torque wrench is essential because fasteners must be torqued to specific values (110 lb-ft for 1/2-inch hardware and 79 lb-ft for M12 hardware).
Yes, the driver side muffler must be removed during installation. On V6 models, you remove the nut from the exhaust clamp holding the muffler. On V8 models, you remove two nuts with springs. The muffler is slid off the exhaust system, then reinstalled after the hitch is secured.
You must remove: (2) exhaust isolators near the muffler on driver and passenger sides, (2) rubber isolators from the exhaust pipe, and the driver side muffler/tube. All bolts and nuts removed should be saved for reinstallation. On V6 models, save the clamp nut; on V8 models, save the two nuts and springs.
Two people may be required to ease installation. The manual notes that using proper tools will greatly improve installation quality and reduce time required.
Fishwire is a technique to route 1/2-inch carriage bolts and CM-SP40 spacers through access holes on the driver and passenger side frame rails. You pull the hardware through existing holes in the frame (2 holes on passenger side and 1 on driver side for 2011-2014 models; 3 holes on passenger side for 2015 models). The manual references a fishwire technique diagram for detailed guidance.
Place the passenger side of the hitch over the passenger side muffler first, then raise the driver side of the hitch into position. This sequence ensures proper alignment before securing.
Torque 1/2-inch hardware (carriage bolts and hex flange nuts) to 110 lb-ft. Torque M12 hardware (M12-1.75 x 40mm hex bolts with conical toothed washers) to 79 lb-ft. Use a torque wrench to ensure proper tightness.
Included hardware: (4) 1/2-inch fishwire carriage bolts (1_2 FISHWIRE), (3) M12-1.75 x 40mm hex bolts, (3) 1/2-inch conical toothed washers, (4) HFN 1213 hex flange nuts, (4) CM-SP40 square hole spacers (0.188 x 1.00 x 3.00 inches), and (4) 1/2-inch fishwire. The parts list notes that not all hardware will be used; usage depends on model year and engine type.
No, drilling is not required. The hitch uses existing holes in the frame and existing weldnuts (on 2011-2014 models) or existing holes (on 2015 models). The manual explicitly states "NO DRILLING REQUIRED."
Safety glasses should be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized Curt installer for additional assistance.
Never exceed your vehicle manufacturer's recommended towing capacity. While Curt 12064 is rated for 3,500 lbs trailer weight and 350 lbs tongue weight, your vehicle's manufacturer may specify a lower limit. Always follow the vehicle manufacturer's guidance.
Yes, all non-trailer loads (wheel-less loads) applied to this hitch must be supported by Curt 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the Curt catalog or visit www.curtmfg.com for further information on stabilizing straps.
After installation, periodically check that all fasteners are tight and that all structural components are sound. This is a critical maintenance step to ensure safe operation. Check fasteners before each towing use.
Curt 12064 is designed for use with ball mount part number D-20 / 45520. Euro mount options are also available: part number 45561 (1-7/8-inch ball) and part number 45562 (2-inch ball).
Yes, Curt 12064 fits 2011-present Dodge Charger, Chrysler 300C, and Chrysler 300S sedans and coupes. Installation differs slightly between 2011-2014 and 2015+ models due to frame weldnut differences.
Torque 1/2-inch hardware to 110 lb-ft and M12 hardware to 79 lb-ft. A torque wrench is required.
Curt 12064 is rated for 3,500 lbs trailer weight and 350 lbs tongue weight, but never exceed your vehicle manufacturer's recommended towing capacity.
Yes, all non-trailer loads must be supported by Curt 18050 stabilizing straps. Failure to do so voids the warranty.
Periodically check that all fasteners are tight and all structural components are sound. This should be done before each towing use.
No reviews have been added for this product.
On Sale Today
Original price was $389.85. Current price is $292.92.You save $96.93 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout