Our in-house experts typically reply within one business day.
CURT
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
This fits: 2012 Hyundai Genesis 5.0
Whatever the next checkpoint is on your adventure -- whether it's getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Hyundai Genesis, Genesis G80 and Genesis G90 (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4" receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid A-coat and black powder coat, giving them long-lasting rust and wear resistance.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Installation requires drilling, heat shield trimming and temporary lowering of exhaust
2012 Hyundai Genesis 5.0 Class 2 Trailer Hitch, 1-1/4" Receiver, Select Hyundai Genesis, G80, G90
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 | Hyundai Genesis | 5 |
Yes, CURT part number 12165 is designed for 2012 Hyundai Genesis 5.0 sedans. It is also compatible with 2015, 2016, and 2017 Genesis G80 sedans. Confirm your vehicle matches these years and body style before purchasing.
The CURT 12165 is rated for a maximum trailer weight of 3,500 lbs and a tongue weight of 350 lbs when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity.
The CURT 12165 is designed for use with ball mount #45521. Euro mount options are also available: #45571 (1-7/8" ball) and #45572 (2" ball).
You will need: a power drill with 17/32" drill bit, a ratchet, 10mm socket, 19mm socket, 3/4" socket, a torque wrench, aviation shears, and a pencil or marker. Safety glasses should be worn at all times during installation.
Two people are recommended to ease installation. If you are hesitant to undertake the task on your own, contact an authorized CURT installer for additional assistance.
Yes. The first installation step requires you to remove four rear rubber exhaust isolators and gently lower the exhaust. On 2012 models, you must also remove two nuts with a 19mm socket in front of the mufflers on each side. The exhaust is reinstalled in step 5 after the hitch is secured.
Yes. Heat shields must be removed before drilling. Remove six screws with a 10mm socket on both sides. After drilling and installing the hitch, the heat shields are modified according to the trim diagram and reinstalled with the original fasteners.
Yes, drilling is required. You must drill four holes into the frame rails using a 17/32" drill bit for 1/2" fasteners. Mark one hole 2.5" rearward of the access hole, centered along the frame rail on each side. Raise the hitch into position to use as a template to mark the forwardmost holes. All dimensions are approximate; confirm fit prior to drilling.
Use a 17/32" drill bit to drill four holes into the frame rails for the 1/2" fasteners.
Yes. After the hitch is installed, the heat shields must be modified as shown in the trim diagram. The modified heat shields are then reinstalled with the original fasteners.
All 1/2" fasteners must be torqued to 110 lb-ft.
The kit includes: four 0.250 x 1.00 x 3.00" square hole spacers (CM-SP6), four 1/2-13 UNC Grade 8 serrated flange nuts (20-00062), four 1/2-13 UNC Grade 8 bolts 1-3/4" long (10-10272), and two pieces of 1/2" fishwire.
Fishwire is used to guide the bolts and spacers into position on each side of the frame before raising the hitch into final position. Two bolts and two spacers are fishwired on each side as shown in the fishwire diagram.
All non-trailer (wheel-less) loads applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
Yes. The CURT 12165 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty.
Yes, the CURT 12165 is designed for 2012, 2015, 2016, and 2017 Hyundai Genesis 5.0 and Genesis G80 sedans.
Maximum 3,500 lbs trailer weight and 350 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Power drill with 17/32" bit, ratchet, 10mm/19mm/3/4" sockets, torque wrench, aviation shears, marker, and safety glasses.
Yes. Drill four holes with a 17/32" bit into the frame rails. Exhaust removal and heat shield modification are also required.
All 1/2" fasteners must be torqued to 110 lb-ft.
Two people are recommended. Contact an authorized CURT installer if you need additional assistance.
All non-trailer loads must be supported by CURT 18050 stabilizing straps, or the warranty is voided.
On Sale Today
Original price was $486.85. Current price is $464.31.You save $22.54 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.