Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2013 - 2018 Acura RDX
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2013-2018 Acura RDX All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Acura RDX (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2013, 2014, 2015, 2016, 2017, 2018 Acura RDX All Class 3 Trailer Hitch, 2" Receiver, Select Acura RDX
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2013 - 2018 | Acura RDX | — |
Yes, the 2013-2018 Acura RDX All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13130-001) is designed to fit the 2013-2018 Acura RDX.
The 2013-2018 Acura RDX All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13130-001) fits 2013-2018 Acura RDX models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2013-2018 Acura RDX All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13130-001) fits the following vehicles: 2013-2018 Acura RDX. Always verify your specific year, make, and model before ordering.
The 2013-2018 Acura RDX All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13130-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes. CURT part number 13130 is designed for the 2013 Acura RDX Crossover. It is a weight-carrying hitch with a gross load capacity of 4,000 lbs trailer weight and 600 lbs tongue weight.
The CURT 13130 has a gross load capacity of 4,000 lbs trailer weight and 600 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity.
The hitch weighs 45 lbs.
Required tools are: safety glasses, 3/4" and 19 mm sockets, socket extension (6"), torque wrench, ratchet, spray lubricant, and a small wire brush. The manual notes that using proper tools will greatly improve the quality of the install and reduce installation time.
No. The CURT 13130 requires no drilling. It uses two existing weldnuts in the rear of the vehicle frame.
Two people may be required to ease installation, though the manual does not state whether a second person is mandatory or optional.
Professional installers should complete the installation in approximately 20 minutes. DIY novice installers should allow approximately 45 minutes.
The hitch includes: 2 M12x1.25 hex cap screws (part 10-10277), 2 1/2-13 UNC hex cap screws 1-1/2" long (part 10-10334), 4 1/2" conical toothed washers (part 30-00149), and 2 1/2-13 UNC handle nuts (part 20-00174).
Locate the two existing weldnuts in the rear of the vehicle frame. Spray lubricant or compressed air into the holes to clean them. For heavy debris, use a small wire brush, being careful not to damage the threads.
Raise the hitch into position so the slots in the hitch are aligned with the two existing weldnuts in the vehicle frame. Loosely secure it with the M12 bolts and 1/2" conical toothed washers.
Bend the 1/2-13 handle nut tab and insert it into the access hole in the vehicle frame. Center the handle nut over the open bolt hole in the frame. Then use 1/2-13 hex bolts and 1/2" conical toothed washers to insert hardware through the hitch plate and vehicle frame into the handle nut and tighten.
Torque all 1/2" hardware to 110 ft-lbs and all M12 hardware to 86 ft-lbs.
Safety glasses must be worn at all times while installing this product.
Non-trailer (wheel-less) loads can be applied to the hitch, but they must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This is a critical ongoing maintenance requirement.
CURT Manufacturing warrants the product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, the CURT 13130 is designed for the 2013 Acura RDX Crossover with a 4,000 lbs trailer weight and 600 lbs tongue weight capacity.
No drilling is required. The hitch uses two existing weldnuts in the vehicle frame.
You need safety glasses, 3/4" and 19 mm sockets, a 6" socket extension, torque wrench, ratchet, spray lubricant, and a small wire brush.
Torque all 1/2" hardware to 110 ft-lbs and all M12 hardware to 86 ft-lbs.
The hitch supports 4,000 lbs trailer weight and 600 lbs tongue weight, but you must never exceed your vehicle manufacturer's recommended towing capacity.
Yes. All non-trailer loads must be supported by CURT 18050 stabilizing straps. Failure to do so voids the warranty.
Periodically check that all fasteners are tight and all structural components are sound.
On Sale Today
Original price was $270.95. Current price is $225.92.You save $45.03 (17%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Sep 1 - Fri, Sep 4
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.