Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2013-2019 Ford Escape Excluding S Models
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Escape (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 525 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2013, 2014, 2015, 2016, 2017, 2018, 2019 Ford Escape Excluding S Models Class 3 Trailer Hitch, 2" Receiver, Select Ford Escape (Exposed Main Body)
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2013 - 2019 | Ford Escape | Excluding S Models |
The 2013-2019 Ford Escape Excluding S Models CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13131-001) fits the following vehicles: 2013-2019 Ford Escape. Always verify your specific year, make, and model before ordering.
The 2013-2019 Ford Escape Excluding S Models CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13131-001) fits 2013-2019 Ford Escape models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2013-2019 Ford Escape Excluding S Models CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13131-001) is designed to fit the 2013-2019 Ford Escape.
The 2013-2019 Ford Escape Excluding S Models CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13131-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Part number 13131 fits 2013-present Ford Escape models, excluding the S model. Confirm your vehicle year and trim level before purchasing. If you have an S model Escape, this hitch is not compatible.
When used as a weight-carrying hitch, the CURT 13131 supports a maximum trailer weight of 3,500 lbs and tongue weight of 525 lbs. When used as a weight-distribution hitch, it supports 5,000 lbs trailer weight and 525 lbs tongue weight. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The hitch weight is 45 lbs.
Required tools are: die grinder, ratchet, socket set, 3/4" boxed end wrench, and torque wrench. Safety glasses must be worn at all times during installation.
The kit includes: four 0.250 x 1.00 x 2.50" square hole spacers (CM-SP10), four 1/2-13 UNC 1-1/2" grade 8 bolts (10-10287), four 1/2-13 UNC grade 8 serrated flange nuts (20-00062), and four pieces of 1/2" fishwire (1_2 FISHWIRE).
Two people may be required to raise the hitch into position under the vehicle. While one person may be able to complete the installation, having a second person available is recommended to ease the process.
The manual does not specify whether battery disconnection is required. Contact CURT Technical Support at 877-287-8634 for clarification on this step.
Yes. The access holes for the square hole spacers must be enlarged using a die grinder. This is the first installation step and is required on both sides of the vehicle frame.
Fishwiring is a technique used to route the 1/2" bolts and spacers through the vehicle frame to the side plate mounting points before the hitch is positioned. The 1/2" fishwire included in the kit is used to guide the bolts and spacers into place. This allows the hitch to be secured without having to access the frame mounting points directly from underneath.
All 1/2" fasteners must be torqued to 110 ft-lbs. Use a torque wrench to achieve this specification.
1. Enlarge access holes for square hole spacers with a die grinder. 2. Fishwire 1/2" bolts and spacers into the vehicle frame at the two side plate mounting points on each side. 3. Place the hitch underneath the vehicle and route fishwire through the side plate mounting holes. Use two people if needed to raise the hitch into position. Remove fishwire and loosely secure mounting hardware. 4. Tighten fasteners on the passenger side using a 3/4" boxed end wrench (limited access). Tighten fasteners on the driver side using a 3/4" socket. 5. Torque all 1/2" fasteners to 110 ft-lbs. 6. Installation is complete.
The passenger side plate has limited access to secure fasteners, so a 3/4" boxed end wrench must be used to tighten the hardware on that side. The driver side plate can be accessed more easily and can be secured using a 3/4" socket, which is faster and more convenient.
No. After positioning the hitch and routing the fishwire through the side plate mounting holes, fasteners should be loosely secured to hold the hitch in position. Full tightening to the 110 ft-lbs specification occurs in step 4, after the hitch is properly aligned.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. The manual does not specify the exact interval for these checks; contact CURT Technical Support at 877-287-8634 for recommended maintenance intervals.
Safety glasses must be worn at all times while installing this product. Additionally, never exceed your vehicle manufacturer's recommended towing capacity when using the hitch.
If you are hesitant to undertake the installation yourself, contact an authorized CURT installer for additional assistance. You can also call CURT Technical Support at 877-287-8634 for installation questions or visit www.curtmfg.com for more information.
Yes, the CURT 13131 fits 2013-present Ford Escape models, excluding the S model.
You need a die grinder, ratchet, socket set, 3/4" boxed end wrench, and torque wrench. Safety glasses are required.
All 1/2" fasteners must be torqued to 110 ft-lbs using a torque wrench.
As a weight-carrying hitch: 3,500 lbs trailer weight, 525 lbs tongue weight. As a weight-distribution hitch: 5,000 lbs trailer weight, 525 lbs tongue weight. Never exceed your vehicle manufacturer's recommended capacity.
Two people may be required to raise the hitch into position, though one person may be able to complete the installation.
Safety glasses must be worn at all times during installation.
On Sale Today
Original price was $447.85. Current price is $332.71.You save $115.14 (26%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.