2013-2020 Lexus GS350 All Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $493.85. Current price is $470.62.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2013 - 2020 Lexus GS350
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2013-2020 Lexus GS350 All
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Lexus GS300 and GS350 (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Uses pre-existing vehicle hardware for installation
2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Lexus GS350 All Class 1 Trailer Hitch, 1-1/4" Receiver, Select Lexus GS300, GS350
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2013 - 2020 | Lexus GS350 | — |
The 2013-2020 Lexus GS350 All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11366-001) fits 2013-2020 Lexus GS350 models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2013-2020 Lexus GS350 All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11366-001) fits the following vehicles: 2013-2020 Lexus GS350. Always verify your specific year, make, and model before ordering.
Yes, the 2013-2020 Lexus GS350 All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11366-001) is designed to fit the 2013-2020 Lexus GS350.
The 2013-2020 Lexus GS350 All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11366-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
CURT part number 11366 is designed for 2013-Present Lexus GS350 Sedan models. Confirm your vehicle matches this specification before purchase.
CURT 11366 is designed for use with ballmount #D-55001 / 45501, and euro mounts #45571 (1 7/8" ball) and #45572 (2" ball).
CURT 11366 is a weight-carrying hitch rated for 2000 lbs. trailer weight and 200 lbs. tongue weight minimum. Never exceed your vehicle manufacturer's recommended towing capacity.
Required tools are: flat and Phillips screwdrivers, 10mm and 12mm sockets, ratchet with 6" extension, torque wrench, rotary tool, and marker. Safety glasses must be worn at all times during installation.
Yes, bumper removal is required. The installation process involves removing the bumper cover, foam, and bumper beam to access the mounting points. The bumper is reinstalled after the hitch is secured.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
No drilling is required. However, a rotary tool is needed to remove the alignment stud and trim the underbody panel as shown in the trim diagram.
Using a rotary tool, remove the alignment stud from each side of the bumper beam location and trim the center of the underbody panel. The trim dimensions are 4.25 inches by 2.38 inches as shown in the trim diagram. The underbody panel is then reinstalled.
All M8 hardware must be torqued to 23 ft-lbs. These are the existing vehicle bolts that secure the hitch and bumper beam to the vehicle.
Remove fasteners in this order: (1) screw and (1) push fastener from behind rear tire, (1) push fastener from wheel well, (1) screw hidden behind wheel well at top of fascia, plastic clip, small plastic panel between tail light and trunk, exposed screw, then (8) push fasteners from rear of fascia. Repeat steps 1-3 on the other side. Disconnect the electrical connector under the driver side tail light before removing the bumper cover.
After removing all fasteners (screws, push fasteners, and plastic clips), carefully remove the bumper cover by popping the sides off first, then pulling straight back. Disconnect the electrical connector under the driver side tail light before fully removing the cover.
Yes, disconnect the electrical connector located under the driver side tail light before removing the bumper cover.
Remove the foam from behind the bumper beam and set it aside. Reinstall the foam when reassembling the bumper cover after the hitch is secured.
There are (8) M8 bolts that secure the bumper beam to the vehicle. These same bolts are reused to secure the hitch and bumper beam in position after installation.
Periodically check that all fasteners are tight and all structural components are sound. This is especially important after initial installation and before towing.
The minimum tongue weight is 200 lbs. This is the minimum load that should be applied to the hitch when towing.
Yes. CURT recommends the use of 18050 Stabilizing Straps for all non-trailer (wheel-less) loads. Failure to properly support non-trailer loads with these straps will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information.
The installation difficulty level is marked as Challenging. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, CURT 11366 fits 2013-Present Lexus GS350 Sedan models.
You need: flat and Phillips screwdrivers, 10mm and 12mm sockets, ratchet with 6" extension, torque wrench, rotary tool, and marker. Safety glasses are required.
No drilling is required. A rotary tool is needed to remove an alignment stud and trim the underbody panel.
Torque all M8 hardware to 23 ft-lbs.
On Sale Today
Original price was $496.85. Current price is $478.89.You save $17.96
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.