2014-2018 Subaru Forester 2.5i Class 2 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $378.85. Current price is $285.92.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2014-2018 Subaru Forester 2.5i Limited
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Subaru Forester (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45519, installation hardware, pin & clip
2014, 2015, 2016, 2017, 2018 Subaru Forester 2.5i Limited Class 2 Trailer Hitch, 1-1/4" Ball Mount, Select Subaru Forester
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2014 - 2018 | Subaru Forester | 2.5i Limited |
The 2014-2018 Subaru Forester 2.5i Limited Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121003-002) fits 2014-2018 Subaru Forester models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2014-2018 Subaru Forester 2.5i Limited Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121003-002) fits the following vehicles: 2014-2018 Subaru Forester. Always verify your specific year, make, and model before ordering.
Yes, the 2014-2018 Subaru Forester 2.5i Limited Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121003-002) is designed to fit the 2014-2018 Subaru Forester.
The 2014-2018 Subaru Forester 2.5i Limited Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-121003-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 12100 is designed for 2014-current Subaru Forester SUVs. The hitch is a weight-carrying receiver hitch with a maximum trailer weight capacity of 3500 lbs and tongue weight capacity of 350 lbs. Always verify your vehicle's manufacturer-recommended towing capacity before towing, as you must never exceed it.
CURT hitch 12100 is designed for use with ballmount #45518, Euro ballmount #45551 (1 7/8" ball), or Euro ballmount #45552 (2" ball). These ballmounts are sold separately and must be ordered to complete your towing setup.
The CURT 12100 is rated for a maximum trailer weight of 3500 lbs and tongue weight of 350 lbs when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
Required tools are: ratchet, 10mm and 3/4" sockets, 6" socket extension, Phillips head screwdriver, grinder or drill (for hole enlargement), torque wrench, and jack stands. Safety glasses must be worn at all times during installation. A die grinder is recommended for the hole enlargement step.
Two people may be required to ease installation. The installation is rated as moderate difficulty and takes approximately 60 minutes for a professional or 120 minutes for a novice DIYer. If you are hesitant to undertake this task, contact an authorized CURT installer for additional assistance.
Yes. You must remove exhaust hangers to lower the exhaust system and support it with a jack stand during installation. For single-exhaust vehicles, remove 2 hangers from the passenger side muffler and 1 from the center front. For dual-exhaust vehicles, also remove 2 hangers from the driver side muffler. The exhaust is then raised back into place and hangers reattached after hitch installation.
Yes. The center hole on each side of the frame must be enlarged to approximately 1 1/8" diameter to allow the mounting hardware to pass through. This enlargement is required on both the driver and passenger sides. A grinder or drill is needed for this step.
The hitch includes 6 carriage bolts (1/2-13 x 1 3/4, Grade 8), 6 hex flange nuts (HFN 1213, Grade 8), 6 square hole spacers (.250 x 1.00 x 2.50", part CM-SP10), and 6 pieces of 1/2" fishwire. All hardware is Grade 8 and must be torqued to 110 ft-lbs.
All 1/2" hardware (carriage bolts and hex flange nuts) must be torqued to 110 ft-lbs. Use a torque wrench to ensure proper tightening. After installation, periodically check that all fasteners remain tight.
All non-trailer loads (wheel-less loads) applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. CURT recommends the use of 18050 stabilizing straps for all non-trailer loads.
After installation, ensure the exhaust system is properly raised back into place and all exhaust hangers are reattached. Periodically check that all fasteners are tight and all structural components are sound. This ongoing inspection is critical to safe hitch operation.
You should periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. The manual does not specify an exact interval, but regular inspection before towing is recommended to maintain safe operation.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, CURT 12100 is designed for 2014-current Subaru Forester SUVs with 3500 lbs trailer weight and 350 lbs tongue weight capacity.
You need a ratchet, 10mm and 3/4" sockets, 6" socket extension, Phillips screwdriver, grinder or drill, torque wrench, jack stands, and safety glasses.
Yes, the center frame holes on both sides must be enlarged to 1 1/8" diameter using a grinder or drill to allow hardware passage.
All 1/2" hardware must be torqued to 110 ft-lbs using a torque wrench.
All non-trailer loads must be supported by CURT 18050 stabilizing straps, or warranty is voided.
Yes, exhaust hangers must be removed and the exhaust supported with a jack stand during installation, then reattached afterward.
CURT ballmount #45518, Euro ballmount #45551 (1 7/8" ball), or Euro ballmount #45552 (2" ball) are compatible.
On Sale Today
Original price was $378.85. Current price is $285.92.
You save $92.93 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 18 - Fri, Aug 21
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.