Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2015 - 2018 Audi Q3 Quattro
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2015-2018 Audi Q3 Quattro All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Audi Q3 and Q3 Quattro (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Installation requires hole enlargement, heat shield and fascia trimming and exhaust to be temporarily lowered
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
2015, 2016, 2017, 2018 Audi Q3 Quattro All Class 3 Trailer Hitch, 2" Receiver, Select Audi Q3, Quattro (Round Tube Frame)
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2015 - 2018 | Audi Q3 Quattro | — |
The 2015-2018 Audi Q3 Quattro All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13238-002) fits 2015-2018 Audi Q3 Quattro models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2015-2018 Audi Q3 Quattro All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13238-002) fits the following vehicles: 2015-2018 Audi Q3 Quattro. Always verify your specific year, make, and model before ordering.
Yes, the 2015-2018 Audi Q3 Quattro All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13238-002) is designed to fit the 2015-2018 Audi Q3 Quattro.
The 2015-2018 Audi Q3 Quattro All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13238-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the CURT 13238 is designed for 2015-Present Audi Q3 Crossover models. Before purchasing, verify your vehicle matches this specification and confirm your vehicle's towing capacity with your manufacturer to ensure you do not exceed it.
The CURT 13238 is rated for a maximum of 3500 lbs trailer weight and 525 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Always verify your specific vehicle's limits before towing.
Non-trailer (wheel-less) loads can be applied to this hitch, but they must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on stabilizing straps.
Required tools are: ratchet, torque wrench, die grinder, T27 socket, 13mm socket, 3/4" socket, 8" extension, and aviation shears. Safety glasses must be worn at all times during installation. Using proper tools will greatly improve the quality of the install and reduce installation time.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance. Technical support is available at 877-287-8634.
Professional installation time is approximately 90 minutes. Novice (DIY) installation time is approximately 45 minutes. Actual time may vary depending on your experience level and familiarity with the tools required.
No drilling is required. However, hole enlargement is required on the frame rails. You must enlarge the forwardmost hole along the bottom of each frame rail and the hole on the outside of each frame rail using a die grinder. These enlarged holes accommodate the 1/2" carriage bolts and spacers.
Yes. You must trim a 3-1/2" square section from the center at the bottom of the bumper fascia using aviation shears. This trimming is required to provide clearance for the hitch. The bumper cover fasteners are then reinstalled after trimming.
Yes. The exhaust must be lowered during installation. You must remove (2) M8 fasteners for the driver side exhaust bracket and (2) M8 fasteners for the muffler hangers using a 13mm socket. Support the muffler to prevent damage to the exhaust. The exhaust brackets are then raised and secured after hitch installation.
Yes. You must cut a notch in the heat shield to clear the forwardmost mounting hole on the driver side frame rail using aviation shears. Remove the heat shield first by removing (1) bolt using a 13mm socket and (1) speed nut. After cutting the notch, reinstall the heat shield using the same bolt and speed nut.
The kit includes: (6) 1/2" fishwire, (2) .375 x 1.25 x 2.00" round hole spacers (CM-SP56), (6) 1/2"-13 UNC carriage bolts grade 8 (10-10287), (6) .250 x 1.00 x 2.50" square hole spacers (CM-SP10), and (6) 1/2"-13 UNC serrated flange nuts grade 8 (20-00062). Factory M8 fasteners for the exhaust brackets are reused.
All 1/2" hardware (carriage bolts and flange nuts) must be torqued to 110 ft-lbs. This torque is applied after the hitch is raised into position and loosely fastened, and before the exhaust brackets are secured.
The factory M8 fasteners for the exhaust brackets must be torqued to 20 ft-lbs. These fasteners are reused from the original exhaust bracket installation and are torqued after the CM-SP56 spacers are placed between the driver side exhaust bracket and the frame.
The fishwire technique is used to route 1/2" carriage bolts and spacers through the frame rail access holes. You reverse fishwire the bolts and spacers through the access hole to the forwardmost hole and outside holes on each frame rail. This technique allows you to position the hardware before raising the hitch into place. The manual includes a fishwire illustration to guide this process.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation. No specific retorque interval is provided in the manual.
Yes. The CURT 13238 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Yes, the CURT 13238 is designed for 2015-Present Audi Q3 Crossover models. Verify your vehicle matches this specification and confirm your vehicle's towing capacity does not exceed the hitch rating of 3500 lbs trailer weight and 525 lbs tongue weight.
Hole enlargement on frame rails is required (using a die grinder). Bumper fascia trimming is required (3-1/2" square section). Exhaust lowering is required. Heat shield notching is required. All modifications are permanent.
Required tools: ratchet, torque wrench, die grinder, T27 socket, 13mm socket, 3/4" socket, 8" extension, and aviation shears. Safety glasses must be worn at all times.
Torque all 1/2" hardware (carriage bolts and flange nuts) to 110 ft-lbs. Torque factory M8 exhaust bracket fasteners to 20 ft-lbs.
Yes. All non-trailer (wheel-less) loads must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads voids the warranty.
Professional installation: approximately 90 minutes. Novice (DIY) installation: approximately 45 minutes. Two people may be required to ease installation.
No reviews have been added for this product.
On Sale Today
Original price was $354.95. Current price is $277.85.You save $77.10 (22%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Aug 26 - Sat, Aug 29
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout