2015 Chevrolet Cruze LTZ Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $378.85. Current price is $285.92.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2015 Chevrolet Cruze LTZ
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Chevy Cruze (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Installation requires heat shield trimming and temporary lowering of the exhaust
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
2015 Chevrolet Cruze LTZ Class 1 Trailer Hitch, 1-1/4" Receiver, Select Chevrolet Cruze
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2015 | Chevrolet Cruze | LTZ |
The 2015 Chevrolet Cruze LTZ Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11425-003) fits the following vehicles: 2015 Chevrolet Cruze. Always verify your specific year, make, and model before ordering.
Yes, the 2015 Chevrolet Cruze LTZ Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11425-003) is designed to fit the 2015 Chevrolet Cruze.
The 2015 Chevrolet Cruze LTZ Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11425-003) fits 2015 Chevrolet Cruze models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2015 Chevrolet Cruze LTZ Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11425-003) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, model 11425 is designed for 2015-Present Chevrolet Cruze and Cruze Limited sedans. Confirm your vehicle matches this specification before purchase.
The hitch is rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight. You must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these limits.
No. The installation notes explicitly state 'NO DRILLING' is required. The hitch uses existing frame holes and access holes.
You will need: ratchet, torque wrench, 3/4" socket, 13mm socket, aviation shears, safety glasses, marker, and tape measure. Using proper tools will greatly improve installation quality and reduce installation time.
The kit includes: 4 square hole spacers (CM-SP2), 4 carriage bolts (7/16-14 UNC, 1-1/4", grade 8), 4 flange nuts (7/16-14 UNC, grade 8), and 2 pieces of 7/16" fishwire.
The manual does not specify whether battery disconnection is required. Contact CURT technical support at 877-287-8634 for clarification on this step.
Two people may be required to ease installation. If you are hesitant to undertake the task on your own, contact an authorized CURT installer for additional assistance.
The manual does not specify whether a lift, jack, or other lifting equipment is required. Contact CURT technical support at 877-287-8634 for guidance on vehicle support during installation.
The first step is to lower the exhaust by removing 2 rubber isolators from the muffler towards the center of the vehicle and removing the bolt securing the rearmost hanger to the frame. Note that exhaust configuration will vary depending on model.
If a heat shield is present on your vehicle, you must trim it to access the access hole in the frame. The manual notes that dimensions are approximate and you should confirm the trim location prior to cutting.
Aviation shears are listed in the required tools and are suitable for trimming the heat shield. The manual provides a heat shield trim diagram to guide the cut location.
Fishwire is used to thread the carriage bolts through the frame access holes and out the mounting holes. You thread 4 SP2 spacers (2 on each side) and 4 carriage bolts (2 on each side) through the access holes using the fishwire. Then raise the hitch into position and secure with 4 flange nuts (2 on each side). The manual references a fishwire technique diagram for detailed guidance.
All 7/16" hardware (carriage bolts and flange nuts) must be torqued to 70 ft-lbs.
After torquing the 7/16" hardware to 70 ft-lbs, raise the exhaust back into position and reinstall the rubber isolators exactly as they were removed in step 1.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing maintenance is critical to safe operation.
Safety glasses must be worn at all times while installing this product.
All non-trailer (wheel-less) loads applied to this hitch must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on stabilizing straps.
CURT hitch 11425 is designed for use with ballmount #D-55001 / 45521. Euro mount options are available: #45571 (1-7/8" ball) and #45572 (2" ball).
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
On Sale Today
Original price was $382.85. Current price is $293.08.You save $89.77 (23%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.