Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2016-2019 Lincoln MKC Select
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Lincoln MKC (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 525 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2016, 2017, 2018, 2019 Lincoln MKC Select Class 3 Trailer Hitch, 2" Receiver, Select Lincoln MKC
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 - 2019 | Lincoln MKC | Select |
Yes, the 2016-2019 Lincoln MKC Select CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13194-005) is designed to fit the 2016-2019 Lincoln MKC.
The 2016-2019 Lincoln MKC Select CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13194-005) fits the following vehicles: 2016-2019 Lincoln MKC. Always verify your specific year, make, and model before ordering.
The 2016-2019 Lincoln MKC Select CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13194-005) fits 2016-2019 Lincoln MKC models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2016-2019 Lincoln MKC Select CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13194-005) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 13194 is designed for 2015-present Lincoln MKC SUVs. Before purchasing, verify your vehicle year and model match this specification. Always confirm your hitch matches your vehicle using the vehicle photo and hitch illustration provided in the installation instructions.
When used as a weight carrying hitch, the CURT 13194 supports 3,500 lbs trailer weight and 525 lbs tongue weight. When used as a weight distribution hitch, it supports 5,000 lbs trailer weight and 525 lbs tongue weight. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
The hitch weight is 45 lbs.
You will need: torque wrench, ratchet, 6" extension, 13mm socket, 11/16" socket, die grinder, and safety glasses. Using proper tools will greatly improve the quality of the installation and reduce installation time.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Professional installation time is approximately 90 minutes. Novice (DIY) installation time is approximately 38 minutes. Actual time may vary depending on your experience level and familiarity with the installation process.
The installation is rated as MODERATE difficulty. The installation requires hole enlargement, fishwire hardware technique, and temporary lowering of the exhaust system.
No, you do not need to remove the exhaust completely. You must temporarily lower the exhaust by removing the two 8mm bolts from the muffler bracket on both sides of the vehicle. Retain these bolts for reinstallation. After sliding the hitch into position, reattach the muffler brackets and torque them to 16 ft-lbs.
No drilling is required. However, you must enlarge the existing access holes on both vehicle frame rails to allow 7/16" carriage bolts and spacers to pass through. This enlargement is done using a die grinder. The vehicle already has existing holes that need to be enlarged, not created.
The muffler bracket bolts must be torqued to 16 ft-lbs after reattachment in step 5 of the installation.
All 7/16" carriage bolts and flange nuts must be torqued to 70 ft-lbs. This is the final torque specification applied after the hitch is positioned and all hardware is loosely installed.
The CURT 13194 includes: 10 carriage bolts (7/16-14 UNC, 1-1/4", Grade 8, part number 10-10281); 10 serrated flange nuts (7/16-14 UNC, Grade 8, part number 20-00103); 4 square hole spacers (0.250 x 1.00 x 2.00", part number CM-SP7); and 4 pieces of 7/16" fishwire (part number 7_16 FISHWIRE).
Fishwire is used to guide the 7/16" carriage bolts and SP7 spacers through the enlarged access hole and out the side mounting holes in the frame rails. Thread the bolts and spacers onto the fishwire, pull the fishwire through the enlarged hole, and the hardware will follow. Leave the fishwires attached while raising the side plates over them, then remove the fishwires and loosely install the nuts on both sides.
Follow these steps in order: (1) Lower the exhaust by removing the two 8mm muffler bracket bolts on both sides; (2) Enlarge the access holes on both frame rails using a die grinder; (3) Use fishwire to thread the 7/16" carriage bolts and spacers through the enlarged holes and loosely install nuts; (4) Slide the hitch in from the rear passenger side over the exhaust and into position, then loosely install the remaining 7/16" bolts and nuts; (5) Reattach the muffler brackets and torque to 16 ft-lbs; (6) Torque all 7/16" hardware to 70 ft-lbs.
Slide the hitch in from the rear passenger side of the vehicle over the exhaust and into position.
After installation, periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing maintenance is important for safe towing operation.
Safety glasses must be worn at all times while installing this product. Additionally, never exceed your vehicle manufacturer's recommended towing capacity when using the hitch.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration to, misuse of, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, the CURT 13194 is designed for 2015-present Lincoln MKC SUVs. Verify your vehicle year and model match before purchasing.
As a weight carrying hitch: 3,500 lbs trailer, 525 lbs tongue weight. As a weight distribution hitch: 5,000 lbs trailer, 525 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Torque wrench, ratchet, 6" extension, 13mm socket, 11/16" socket, die grinder, and safety glasses.
Professional installation: approximately 90 minutes. Novice DIY installation: approximately 38 minutes. Actual time varies by experience level.
Muffler bracket bolts: 16 ft-lbs. All 7/16" carriage bolts and flange nuts: 70 ft-lbs.
Wear safety glasses at all times during installation. Never exceed your vehicle manufacturer's recommended towing capacity. Periodically check all fasteners and structural components after installation.
No reviews have been added for this product.
On Sale Today
Original price was $436.85. Current price is $325.71.You save $111.14 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout