2017-2020 BMW M240i xDrive All Class 1 Trailer Hitch, 1-1/4" Ball MountCURT$381.79In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2020 BMW M240i
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2017-2020 BMW M240i All
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the BMW 228, 320, 328, 335, 340, 428, 435 and 440 (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, pin & clip (Uses pre-existing vehicle hardware for installation)
2017, 2018, 2019, 2020 BMW M240i All Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select BMW Vehicles
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2020 | BMW M240i | — |
The 2017-2020 BMW M240i All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113673-023) fits the following vehicles: 2017-2020 BMW M240i. Always verify your specific year, make, and model before ordering.
The 2017-2020 BMW M240i All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113673-023) fits 2017-2020 BMW M240i models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2017-2020 BMW M240i All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113673-023) is designed to fit the 2017-2020 BMW M240i.
The 2017-2020 BMW M240i All Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113673-023) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part 113673 fits BMW 2011–present models with Select 2-Series, 3-Series, and 4-Series Sedan body styles. Confirm your vehicle matches these specifications before purchasing.
The hitch has a weight-carrying capacity of 2000 lbs trailer weight and 200 lbs tongue weight minimum. Never exceed your vehicle manufacturer's recommended towing capacity.
You will need: 18mm socket, 10mm socket, 8mm socket, T20 Torx bit socket, ratchet, socket extension, torque wrench, and safety glasses. Using proper tools will greatly improve the quality of the install and reduce the time required.
No, drilling is not required. The hitch attaches to existing M10 nuts on the rear panel studs of your BMW.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
You must remove: tail lights, heat shield, splash guards from both sides, wheel well trim, bumper cover, and bumper beam. The bumper beam is the last component removed before the hitch is installed. All removed parts are reinstalled after hitch installation.
Torque all M10 nuts to 89 ft. lbs. when reinstalling the bumper beam onto the rear panel studs after the hitch is in place.
Yes. The hitch uses the existing M10 nuts that are already on the rear panel studs. These fasteners are reinstalled to secure the bumper beam after the hitch is mounted.
1. Remove tail lights. 2. Remove heat shield. 3. Remove splash guards from both sides. 4. Remove wheel well trim. 5. Remove bumper cover. 6. Remove bumper beam and disconnect any wiring for optional equipment. 7. Slide hitch onto rear panel studs and reinstall bumper beam using existing M10 nuts, torqued to 89 ft. lbs. 8. Reinstall bumper cover, splash guards, and tail lights in reverse order.
Use an 8mm socket to remove 4 bolts from just below the bumper cover and a 10mm socket to remove 3 bolts from just above the exhaust. Return the heat shield and fasteners to the vehicle owner after removal.
Use an 8mm socket to remove 4 bolts from each side of the vehicle. Remove splash guards from both sides.
Unscrew the rearmost end of both wheel wells using 8mm and 10mm sockets. Pull the wheel well back to reveal a T20 Torx screw and remove it from both sides.
Use a 10mm socket to remove 5 bolts from the bottom edge of the cover and additional bolts from the top edge near where the tail lights were removed in Step 1.
Use an 18mm socket to remove 4 nuts (2 nuts on each side). Before completely removing the bumper beam, disconnect any wiring that may be present with options installed on your vehicle.
The hitch is designed for use with ball mount #D-21/45521 or Euro mounts 45571 (1 7/8″ ball) and 45572 (2″ ball). See the CURT catalog or visit www.curtmfg.com for further information.
Safety glasses should be worn at all times while installing this product. Before you begin installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Never exceed your vehicle manufacturer's recommended towing capacity. The hitch itself is rated for 2000 lbs trailer weight and 200 lbs tongue weight minimum, but your BMW's manufacturer specifications may be lower.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain safe operation.
No. CURT recommends the use of 18050 stabilizing straps for all non-trailer (wheel-less) loads. See the CURT catalog or visit www.curtmfg.com for further information.
Yes, if your BMW is a 2011–present 3-Series Sedan. Confirm your model year and body style match before purchasing.
You need 18mm, 10mm, and 8mm sockets; T20 Torx bit socket; ratchet; socket extension; torque wrench; and safety glasses.
No, drilling is not required. The hitch attaches to existing M10 nuts on the rear panel studs.
Torque all M10 nuts to 89 ft. lbs. when reinstalling the bumper beam.
The hitch is rated for 2000 lbs trailer weight and 200 lbs tongue weight minimum. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes, safety glasses should be worn at all times while installing this product.
On Sale Today
Original price was $399.85. Current price is $381.79.You save $18.06 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 10 - Thu, Aug 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.