Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2017 Nissan Quest S
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Nissan Quest (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2017 Nissan Quest S Class 3 Trailer Hitch, 2" Receiver, Select Nissan Quest
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 | Nissan Quest | S |
The 2017 Nissan Quest S CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13078-005) fits 2017 Nissan Quest models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2017 Nissan Quest S CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13078-005) fits the following vehicles: 2017 Nissan Quest. Always verify your specific year, make, and model before ordering.
Yes, the 2017 Nissan Quest S CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13078-005) is designed to fit the 2017 Nissan Quest.
The 2017 Nissan Quest S CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13078-005) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 13078 is designed for 2011-Present Nissan Quest minivans. The manual confirms compatibility with this model and year range.
Yes, the hitch is compatible with vehicles equipped with a factory tow hook. During installation, you will remove the existing tow hook by removing its hardware through access holes in the trunk pan and from underneath the vehicle. Return the tow hook and hardware to the vehicle owner.
The CURT 13078 has two capacity ratings depending on how it is used. As a weight-carrying hitch: 3,500 lbs. trailer weight and 300 lbs. tongue weight. As a weight-distribution hitch: 5,000 lbs. trailer weight and 500 lbs. tongue weight. The hitch itself weighs 120 lbs. Do not exceed your vehicle manufacturer's recommended towing capacity.
You will need: 18mm socket, 19mm socket, ratchet, 9-inch extension, and a torque wrench. Safety glasses should be worn at all times during installation. No drilling is required.
The hitch includes 8 HHCS M12x1.25 bolts (part number 10-10277) and 8 S-CON washers 1/2-inch (part number 30-00149). These fasteners are used to attach the hitch to the vehicle's frame.
Two people may be required to ease installation, according to the manual. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Professional installers typically complete the installation in 42 minutes. For DIY novice installers, allow approximately 60 minutes. These times assume you have the proper tools and follow all instructions carefully.
No, drilling is not required. The hitch uses existing weldnuts on both the driver and passenger side frame rails.
All M12 hardware must be torqued to 86 ft-lbs. This includes both the bottom bolts and the bolts installed through the access holes in the trunk pan. Use a torque wrench to ensure proper tightness.
Leave all bolts loose initially. First, loosely install the bottom bolts and washers. Then loosely install the bolts and washers through the access holes in the trunk pan. Only after all bolts are in place should you torque all M12 hardware to 86 ft-lbs.
The hitch mounts to existing weldnuts on both the driver and passenger side frame rails. Access to the upper mounting points is through holes in the trunk pan. To reach these access holes, carefully pull back the carpet on each side of the trunk pan from inside the vehicle. Two rubber plugs must be removed from each side before installation.
Return the tow hook and all its hardware to the vehicle owner. The manual specifies that you should remove the tow hook by removing its hardware through access holes in the trunk pan and then from underneath the vehicle.
Yes. After torquing all M12 hardware to 86 ft-lbs, replace the rubber plugs in the trunk pan and tuck the carpet back into its original position.
After installation is complete, verify that all M12 fasteners are torqued to 86 ft-lbs. The manual emphasizes that you should periodically check the receiver hitch to ensure all fasteners remain tight and all structural components are sound.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. The manual does not specify an exact interval, but regular inspection is essential for safe towing.
Never exceed your vehicle manufacturer's recommended towing capacity. While the CURT 13078 is rated for up to 3,500 lbs. trailer weight and 300 lbs. tongue weight as a weight-carrying hitch (or 5,000 lbs. trailer and 500 lbs. tongue as a weight-distribution hitch), your Nissan Quest may have a lower manufacturer limit. Always defer to the vehicle manufacturer's specification.
Safety glasses should be worn at all times while installing this product. If you are hesitant to undertake this installation task on your own, contact an authorized CURT installer for additional assistance.
Yes, the CURT 13078 is designed for 2011-Present Nissan Quest minivans. No drilling is required.
Weight-carrying: 3,500 lbs. trailer, 300 lbs. tongue. Weight-distribution: 5,000 lbs. trailer, 500 lbs. tongue. Never exceed your vehicle manufacturer's recommended towing capacity.
18mm and 19mm sockets, ratchet, 9-inch extension, torque wrench, and safety glasses. No drilling required.
Professional installation: 42 minutes. DIY novice: 60 minutes. Two people may be required to ease installation.
All M12 hardware must be torqued to 86 ft-lbs. Install bolts loosely first, then torque after all fasteners are in place.
Periodically check that all fasteners are tight and structural components are sound. Verify all M12 bolts are torqued to 86 ft-lbs after installation.
Wear safety glasses at all times during installation. Never exceed your vehicle manufacturer's recommended towing capacity. Contact an authorized CURT installer if you are hesitant to install it yourself.
On Sale Today
Original price was $530.85. Current price is $387.71.You save $143.14 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.