Our in-house experts typically reply within one business day.
Raybestos
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
The Raybestos Voyager XP electric brake controller provides secure trailer braking when you need it most. As a tried-and-true proportional brake controller, the Voyager XP utilizes patented braking sensor technology and advanced electronics to provide a smooth braking response in any stopping situation. Its bi-colored LED brake indicator assures a complete connection between your vehicle and trailer, with the color changing gradually from green, which notes a completed circuit, to red to indicate relative braking power. This versatile controller has a compact design, a conveniently located power control knob to adjust settings, and a simple level knob for easy leveling during installation. Plus, the Voyager has a Plug & Play feature that allows for quick and easy connection with your vehicle?s wiring. The Raybestos Voyager XP trailer brake controller works with 1-4 axle trailers, comes with all the mounting hardware needed for installation.
| BRAND: | RAYBESTOS |
| PART NUMBER: | 761-9035 |
| WEIGHT: | 0.7 LBS |
| MATERIAL: | PLASTIC |
| BRAKE CONTROL TYPE: | PROPORTIONAL |
| TRAILER BRAKE WHEEL QUANTITY: | UP TO EIGHT WHEELS |
| LEVELING CAPABLE: | YES |
| BRAKE TYPE: | Electric |
| Diagnostic Capable: | YES |
| DISPLAY TYPE: | LED OUTPUT |
| HYDRAULIC CONNECTIONS: | NO |
| SOLID STATE CONSTRUCTION: | YES |
| CIRCUIT BREAKER PROTECTED: | YES |
| HOUSING COLOR: | BLACK |
| BRACKET INCLUDED: | YES |
Experts available to answer your questions
Call 888-634-94941 Year
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2020 - 2026 | Chrysler Voyager | w/Factory 7: Way |
The 2020-2026 Chrysler Voyager w/Factory 7-Way Voyager XP Proportional Brake Controller for Trailers with 1?4 Axles, Black 761-9035 (Part #761-9035 70381) fits 2020-2026 Chrysler Voyager models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2020-2026 Chrysler Voyager w/Factory 7-Way Voyager XP Proportional Brake Controller for Trailers with 1?4 Axles, Black 761-9035 (Part #761-9035 70381) fits the following vehicles: 2020-2026 Chrysler Voyager. Always verify your specific year, make, and model before ordering.
Yes, the 2020-2026 Chrysler Voyager w/Factory 7-Way Voyager XP Proportional Brake Controller for Trailers with 1?4 Axles, Black 761-9035 (Part #761-9035 70381) is designed to fit the 2020-2026 Chrysler Voyager.
The 2020-2026 Chrysler Voyager w/Factory 7-Way Voyager XP Proportional Brake Controller for Trailers with 1?4 Axles, Black 761-9035 (Part #761-9035 70381) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The 3082-037 adapter is designed for Jeep Wagoneer, Grand Wagoneer, Chrysler Pacifica with Factory 7-way, Chrysler Voyager with Factory 7-way, Durango with Factory Tow, and Jeep Grand Cherokee WK (all styles). If your vehicle is not on this list, this adapter is not compatible.
The 3082-037 is a wiring adapter that connects an electric trailer brake control unit to your vehicle's factory electric brake control harness. It allows you to integrate an aftermarket or replacement brake control with your vehicle's existing electrical system.
You will need a trim panel remover and wire crimpers. The trim panel remover is used to carefully remove the vehicle trim panel underneath the dash without damaging courtesy lamp wires. Wire crimpers are used to attach butt connectors to the adapter wires.
The manual does not specify whether butt connectors are included. The installation instructions state that you must use butt connectors to attach the adapter wires to the electric brake control wires, but it does not confirm whether they are supplied. Contact the manufacturer or check your package contents to confirm.
The electric brake control harness connector is located underneath the dash and to the left of the steering column. It is taped to another harness near the emergency brake pedal. You will be looking for a 4-pin connector that matches the one on the adapter.
Yes, but only for Chrysler Pacifica, Chrysler Voyager, Durango, and Jeep Grand Cherokee WK. For Jeep Wagoneer and Grand Wagoneer, the connector is accessible without trim panel removal. When removing the trim panel, carefully avoid pulling on the courtesy lamp wires that are attached to it.
First, plug the brake control adapter into the mating receptacle on the backside of the brake control unit itself. Only after this is complete should you attach the adapter to the vehicle's electric brake control connector. This sequence prevents accidental damage or incorrect connections.
Yes. The adapter installation is only part of the complete setup. You must also follow the electric brake control manufacturer's installation instructions for mounting the unit and performing test procedures. The adapter simply provides the connection interface between your vehicle and the brake control unit.
The maximum rating is 24 amps, which supports a maximum of 4 axles and 8 brakes. You must not exceed the lower of your towing manufacturer's rating (as stated in your vehicle owner's manual) or this 24 amp limit. Overloading the circuit can cause fires.
Always wear safety glasses during installation. Read and follow all warnings and instructions included with the adapter and your brake control unit before beginning. Read all warnings and instructions printed on your vehicle's battery. Consult your vehicle owner's manual for additional information. Do not pull on courtesy lamp wires when removing trim panels.
Only if your vehicle is not equipped with an OEM trailer tow package. Vehicles without the factory tow package may require fuses and relays to complete the output and battery feed circuits. These are sold separately. Consult your vehicle owner's manual for the correct locations and specifications.
Jeep Wagoneer, Grand Wagoneer, Chrysler Pacifica with Factory 7-way, Chrysler Voyager with Factory 7-way, Durango with Factory Tow, and Jeep Grand Cherokee WK (all styles).
Trim panel remover and wire crimpers. Butt connectors are also needed but the manual does not confirm if they are included.
Only for Chrysler Pacifica, Chrysler Voyager, Durango, and Jeep Grand Cherokee WK. Jeep Wagoneer and Grand Wagoneer do not require trim panel removal.
24 amps maximum (8 brakes, 4 axles). Do not exceed the lower of your towing manufacturer's rating or this limit, as overloading can cause fires.
Plug the adapter into the mating receptacle on the backside of the brake control unit first, before connecting it to the vehicle's electric brake control connector.
Possibly. Vehicles without an OEM trailer tow package may require fuses and relays (sold separately) to complete the output and battery feed circuits. Consult your vehicle owner's manual for locations.
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.