2020-2025 Mazda CX-30 All Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $430.85. Current price is $319.92.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2020 - 2025 Mazda CX-30
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2020-2025 Mazda CX-30 All
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Mazda CX30 (see application info to verify fitment). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2020, 2021, 2022, 2023, 2024, 2025 Mazda CX-30 All Class 1 Trailer Hitch, 1-1/4" Receiver, Select Mazda CX-30
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2020 - 2025 | Mazda CX-30 | — |
The 2020-2025 Mazda CX-30 All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11599-001) fits 2020-2025 Mazda CX-30 models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2020-2025 Mazda CX-30 All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11599-001) is designed to fit the 2020-2025 Mazda CX-30.
The 2020-2025 Mazda CX-30 All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11599-001) fits the following vehicles: 2020-2025 Mazda CX-30. Always verify your specific year, make, and model before ordering.
The 2020-2025 Mazda CX-30 All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11599-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 11599 is designed for 2020-present Mazda CX-30 Crossover models. Verify your vehicle year and model match before purchasing.
The CURT 11599 is rated for a maximum trailer weight of 2,000 lbs. and a tongue weight of 200 lbs. when used as a weight-carrying hitch. You must not exceed your vehicle manufacturer's recommended towing capacity.
The manual does not provide the hitch weight specification.
You will need: a die grinder, ratchet, 3/4" socket, 6" socket extension, torque wrench, utility knife, and safety glasses. The manual rates this as an easy to moderate difficulty installation.
The kit includes: (4) 1/2" fishwires, (4) .250 x 1.00 x 3.00" square hole spacers (part CM-SP6), (4) 1/2"-13 UNC grade 8 carriage bolts 1-1/2" long (part 10-10287), and (4) 1/2"-13 UNC grade 8 serrated flange nuts (part 20-00062).
The manual does not specify whether battery disconnection is required. Contact CURT technical support at 877-287-8634 for clarification.
Two people may be required to ease installation. The manual recommends reading all instructions thoroughly before beginning and using proper tools to improve installation quality.
No, drilling is not required. However, you must use a die grinder to enlarge the third hole from the back of the vehicle on both sides of the frame rail to accommodate the supplied spacers and carriage bolt heads. Excess sealer should be removed with a utility knife if present.
No, fascia trimming is not required for this installation.
Yes, you must temporarily lower the exhaust by unhooking the (4) rubber isolators from the muffler. Support the exhaust so it is not damaged. After the hitch is installed and fasteners are torqued, raise the exhaust back into position and reinstall the (4) rubber isolators.
Fishwiring is a technique using the supplied 1/2" fishwires to thread carriage bolts and spacers through the frame holes before raising the hitch into position. You must fishwire (2) 1/2" carriage bolts and (2) square hole spacers into the first and second holes on both sides of the frame rail. This allows the bolts to be in place when you raise the hitch over the exhaust.
Carefully raise the hitch into position over the exhaust and onto the carriage bolts. Loosely install the supplied hex flange nuts. Push the hitch as far rearward on the vehicle as possible to give maximum clearance to the muffler and exhaust components.
All 1/2" fasteners must be torqued to 110 lb.-ft. This includes the carriage bolts and hex flange nuts.
Safety glasses must be worn at all times while installing this product.
All non-trailer (wheel-less) loads applied to this hitch must be supported by CURT part number 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information.
You must never exceed your vehicle manufacturer's recommended towing capacity. The CURT 11599 is rated for 2,000 lbs. trailer weight and 200 lbs. tongue weight, but your vehicle's limits may be lower. Always follow your Mazda CX-30 owner's manual for towing specifications.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This is an ongoing maintenance requirement, not a one-time check.
The manual states you should periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound, but does not specify an exact interval. Regular inspection before towing is recommended.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, the CURT 11599 is designed for 2020-present Mazda CX-30 Crossover models.
Maximum trailer weight is 2,000 lbs. and tongue weight is 200 lbs. Do not exceed your vehicle manufacturer's recommended towing capacity.
No drilling is required, but you must use a die grinder to enlarge existing holes on both frame rails to fit the spacers and bolt heads.
You will need a die grinder, ratchet, 3/4" socket, 6" socket extension, torque wrench, utility knife, and safety glasses.
All 1/2" fasteners must be torqued to 110 lb.-ft.
All non-trailer (wheel-less) loads must be supported by CURT part number 18050 stabilizing straps, or the warranty is voided.
On Sale Today
Original price was $434.85. Current price is $327.08.You save $107.77 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.