Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2022 - 2025 Infiniti QX60
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2022-2025 INFINITI QX60 All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Nissan Pathfinder and Infiniti QX60 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 900 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 900 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2022, 2023, 2024, 2025 INFINITI QX60 All Class 3 Trailer Hitch, 2" Receiver, Select Nissan Pathfinder, Infiniti QX60
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
The 2022-2025 INFINITI QX60 All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13512-002) fits the following vehicles: 2022-2025 Infiniti QX60. Always verify your specific year, make, and model before ordering.
Yes, the 2022-2025 INFINITI QX60 All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13512-002) is designed to fit the 2022-2025 Infiniti QX60.
The 2022-2025 INFINITI QX60 All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13512-002) fits 2022-2025 Infiniti QX60 models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2022-2025 INFINITI QX60 All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13512-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Gross trailer weight (GTW) is 6,000 lbs. with a tongue weight (TW) of 900 lbs. Weight distribution capacity is 6,000 lbs. with a weight distribution tongue weight (WDTW) of 900 lbs.
Required tools: ratchet, 3/4" socket, 21mm socket, 6" socket extension, torque wrench, marker, tape measure, utility knife, exhaust removal tool, and safety glasses.
Yes. The exhaust pipe must be lowered and three exhaust hangers must be removed. The exhaust must be supported before removing the rubber hangers, then reinstalled after hitch mounting.
Yes. The bumper cover must be trimmed. Measure a 4.25" wide and 2.5" deep section in the center from the lowest edge, mark it, and use a utility knife to cut the lower fascia.
All M12 fasteners must be torqued to 60 ft-lbs.
Yes, the spare tire must be temporarily removed to access the hitch mounting area. Use a 21mm socket to lower the spare tire. After hitch installation, push the spare tire slightly forward to add clearance from the receiver.
Safety glasses must be worn at all times during installation. Be careful when cutting plastic or metal as injury may occur if done improperly. Support the exhaust before removing rubber hangers.
The kit includes 6 hex head cap screws (M12) and 6 conical-toothed washers (M12). These fasteners are used to secure the hitch to the vehicle frame.
Open the rear hatch to access the spare tire lift mechanism. Use a 21mm socket to lower the spare tire and set it aside during installation.
Measure a 4.25" wide and 2.5" deep section in the center from the lowest edge of the bumper cover. Mark the section and use a utility knife to cut the lower fascia. Center align the cut.
The conical-toothed washers must be oriented with the teeth facing the vehicle frame. Refer to the assembly diagram on page 2 for the correct orientation of the washer between the hex bolt and hitch side plate.
No. In Step 4, loosely install the M12 bolts and conical washers to secure the hitch to the vehicle. Only after the exhaust and spare tire are reinstalled should you torque all M12 fasteners to 60 ft-lbs. in Step 5.
After loosely installing the hitch and torquing all M12 fasteners to 60 ft-lbs., reinstall the exhaust pipe first, then reinstall the spare tire. Push the spare tire slightly forward to add clearance from the receiver.
Never exceed the vehicle manufacturer's recommended towing capacity. The CURT 13512 has a gross trailer weight capacity of 6,000 lbs. and tongue weight of 900 lbs., but your vehicle's manufacturer may have a lower limit that must be observed.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. This helps prevent damage to the product or vehicle.
An exhaust removal tool (exhaust removal pliers) is required. Apply soapy water to help lower the exhaust pipe and remove the three exhaust hangers.
Use a utility knife to cut the lower fascia. Be careful when cutting plastic or metal as injury may occur if done improperly. Wear safety glasses during this step.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2022 - 2025 | Infiniti QX60 | — |
On Sale Today
Original price was $509.85. Current price is $341.91.You save $167.94 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
