Our in-house experts typically reply within one business day.
ARIES
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes side steps and mounting hardware
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: TEXTURED BLACK POWDER COAT
Material: Carbon Steel
Color: Black
Side Component Type: Board and Bracket
Sometimes side bars, nerf bars and running boards just aren't the right fit for the off-roader. When your vehicle is beefed up and built out the way it was born to be, you need a step up from ordinary. ARIES Rocker Step running boards are the ideal side accessory for the off-road-style truck, Jeep or SUV, featuring extra protection for your rocker panels, a convenient 3" wide step up and enough ground clearance to allow you to hold nothing back. While many rocker panel protectors are simple steel panels or tubes, the ARIES Rocker Step is something more. In addition to its all-steel construction, it has a wide, flat profile that provides two key advantages. First, it offers a convenient, comfortable step up into your vehicle The double-tube layout and welded top plate create a sturdy, 3" wide stepping surface. Second, the flat design offers added ground clearance. Unlike some side bars that are mounted down and away from the vehicle, ARIES Rocker Step running boards are set high enough to clear brush, boulders and other off-road debris. They also feature a durable E-coat and textured black powder coat finish to resist rust and hide scratches and grime. Mounting ARIES Rocker Step running boards is fast and easy. They come with vehicle-specific mounting brackets, pre-welded into place, to provide reliable footing and a custom fit on your vehicle. This particular set of Rocker Step running boards fits specific years of the Chevy Silverado 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 HD or 3500 Classic and GMC Sierra 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 HD or 3500 Classic (see application info to verify fitment). The brackets install using pre-existing mounting locations to eliminate the need for drilling and cut down on installation time. ARIES Rocker Steps are sold in pairs for the driver and passenger side and come with all necessary mounting hardware.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
The ARIES 2074108 Black Steel Rocker Step Guard Running Boards, Select Chevrolet Silverado, GMC Sierra 1500, 2500, 3500 HD (Part #BBDR2074108) fits 2007-2018 Chevrolet Silverado 1500 models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
The ARIES 2074108 Black Steel Rocker Step Guard Running Boards, Select Chevrolet Silverado, GMC Sierra 1500, 2500, 3500 HD (Part #BBDR2074108) fits the following vehicles: 2007-2018 Chevrolet Silverado 1500; 2019 Chevrolet Silverado 1500 LD; 2007-2019 Chevrolet Silverado 2500 HD; 2007-2018 Chevrolet Silverado 3500 HD; 2007-2018 GMC Sierra 1500; 2019 GMC Sierra 1500 Limited; 2007-2019 GMC Sierra 2500 HD; 2007-2018 GMC Sierra 3500 HD. Always verify your specific year, make, and model before ordering.
Yes, the ARIES 2074108 Black Steel Rocker Step Guard Running Boards, Select Chevrolet Silverado, GMC Sierra 1500, 2500, 3500 HD (Part #BBDR2074108) is designed to fit the 2007-2018 Chevrolet Silverado 1500.
The ARIES 2074108 Black Steel Rocker Step Guard Running Boards, Select Chevrolet Silverado, GMC Sierra 1500, 2500, 3500 HD (Part #BBDR2074108) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes two rocker steps (driver/left and passenger/right), two mounting brackets (passenger/right front and passenger/right top front), 12 clip nuts (M8), 1 bolt plate (M8 - 1.25 x 30mm), 15 hex bolts (M8 - 1.25 x 25mm), 17 flat washers (M8), 13 lock washers (M8), and 3 nylock nuts (M8).
You will need a torque wrench, 13mm socket, 13mm wrench, and a flathead screwdriver. A torque wrench is essential to tighten all hardware to the correct specifications.
Yes. The manual specifies 'with help' when lifting the rocker step into position and aligning the brackets with the vehicle mounting points, indicating that two people are required for proper installation.
M8 bolts must be tightened to 7 ft.-lbs. (or 5/16" bolts if using SAE specifications). This applies to all M8 hex bolts, bolt plates, and other M8 fasteners used throughout the installation.
There are three mounting points along the bottom edge of the vehicle on each side. The installation begins by locating these three points on the driver side, then repeats the process for the passenger side.
A clip-nut is a fastener that slides over mounting points on the vehicle. To install it, use a flathead screwdriver to remove the hole plug, then insert the clip-nut through the access hole and slide it over the adjacent small hole. Depending on the model year, an additional clip-nut may be needed for the upper mounting point.
Each rocker step is secured using two M8 hex bolts, two lock washers, and two flat washers at the initial mounting points. All hardware must be tightened to 7 ft.-lbs. torque specification.
The top mounting bracket is attached to the bracket on the rocker step using an M8 hex bolt, lock washer, and flat washer. The bracket is then slid up through the opening between the rocker panel edge and the DEF tank, positioned over the mounting hole along the rocker panel edge, and secured with an M8 bolt plate, flat washer, and nylock nut.
The passenger front mounting bracket is attached to the rocker step using two M8 hex bolts, four M8 flat washers, and two M8 nylock nuts. All hardware must be tightened to the 7 ft.-lbs. torque specification for M8 bolts.
No. DEF tank shield removal and trimming is required only on 2017 diesel models. The shield must be removed before installation, trimmed as needed, and then reinstalled after the rocker steps are mounted.
Periodic inspections should be performed to ensure all mounting hardware remains tight. For black finishes, mild soap may be used to clean the product. Regular checks will help maintain the integrity of the installation.
Two rocker steps are included: one driver/left rocker step and one passenger/right rocker step.
Installation begins on the driver side by locating three mounting points, installing clip-nuts, lifting the rocker step into position, and securing it with M8 hex bolts, lock washers, and flat washers. The same process is repeated for the passenger side middle and rear mounting brackets. Finally, the front mounting bracket is installed by attaching the top bracket to the rocker step, sliding it through the rocker panel opening, and securing it with a bolt plate and nylock nut.
The manual does not specify vehicle make, model, or model year range. Contact ARIES Automotive at 877.287.8634 or visit ARIESAUTOMOTIVE.COM to confirm fitment for your vehicle.
Yes. A torque wrench is required to tighten all M8 bolts to the correct specification of 7 ft.-lbs.
No. The manual specifies that help is needed to lift the rocker step into position and align the brackets with the vehicle mounting points.
No drilling is required. The installation uses existing mounting points on the vehicle. However, on 2017 diesel models, the DEF tank shield must be removed and trimmed before reinstallation.
All M8 bolts and fasteners must be tightened to 7 ft.-lbs. (or 5/16" if using SAE specifications).
Perform periodic inspections to ensure all mounting hardware remains tight. Tighten any loose bolts to the 7 ft.-lbs. specification.
On Sale Today
Original price was $352.95. Current price is $180.00.You save $172.95 (49%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Nov 2 - Thu, Nov 5
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
