Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2022 Ford F-250 Super Duty
Confirmed to Fit
2017 - 2022 Ford F-350 Super Duty
Confirmed to Fit
2017 - 2022 Ford F-450 Super Duty
Confirmed to Fit
2017 - 2022 Ford F-550 Super Duty
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes grille guard and mounting hardware
Grille guard may interfere with forward-facing cameras or sensors
Warranty: Limited Lifetime Warranty (One-Year Parts)
Finish: POLISHED STAINLESS
Material: Blank
For the conqueror in every truck, Jeep or SUV owner, the ARIES grille guard offers the tough, trail-ready look you demand. It begins with a one-piece frame of 1/4" thick welded plates and 1-1/2" mandrel-bent tubing for a solid build. Each one is made with a vehicle-specific design for a better fit, easier install and more secure mounting. The side brush guards are custom-bent to contour to the profile of your vehicle, while the mounting brackets are positioned for a no-drill application. This means pre-existing factory holes are used to ensure optimum fitment and less vibration. This particular custom grille guard fits specific years of the Ford F250 Super Duty and F350 Super Duty (see application info to verify). The ARIES grille guard also makes it easy to customize the look of your vehicle. Not only does the crossbar have two pre-drilled holes for mounting aftermarket LED lights, but many of our grille guards are also available in two finish options -- polished stainless steel or semi-gloss black steel. The stainless steel grille guard is made with 304 stainless, being high in nickel content and truly resistant to rust and corrosion. This option comes with a mirror-like polished finish for a definitive shine. The semi-gloss black grille guard is made with high-strength carbon steel for added strength. It features a tough black powder coat finish to protect against rust, scratches and the elements. All ARIES grille guards also come with rubber stripping al ong the risers to protect the frame against scuffs and scratches.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Parts)
4 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2022 | Ford F-250 Super Duty | — |
| 2017 - 2022 | Ford F-350 Super Duty | — |
| 2017 - 2022 | Ford F-450 Super Duty | — |
| 2017 - 2022 | Ford F-550 Super Duty | — |
The ARIES Polished Stainless Grille Guard, Select Ford F-250, F-350 Super Duty Grille Guard (Part #BBDR3067-2) fits 2017-2022 Ford F-250 Super Duty models. The 2022 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the ARIES Polished Stainless Grille Guard, Select Ford F-250, F-350 Super Duty Grille Guard (Part #BBDR3067-2) is designed to fit the 2017-2022 Ford F-250 Super Duty.
The ARIES Polished Stainless Grille Guard, Select Ford F-250, F-350 Super Duty Grille Guard (Part #BBDR3067-2) fits the following vehicles: 2017-2022 Ford F-250 Super Duty; 2017-2022 Ford F-350 Super Duty; 2017-2022 Ford F-450 Super Duty; 2017-2022 Ford F-550 Super Duty. Always verify your specific year, make, and model before ordering.
The ARIES Polished Stainless Grille Guard, Select Ford F-250, F-350 Super Duty Grille Guard (Part #BBDR3067-2) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes: 1 grille guard, 2 frame brackets (driver/left and passenger/right), 2 lower mounting brackets (driver/left and passenger/right), 2 spacer plates, 8 hex bolts (M12 × 35 mm), 16 flat washers (M12 × 32 mm OD × 3 mm), 8 lock washers (M12), 8 hex nuts (M12), and 2 plastic retainers (M12). Factory bumper bolts and frame extension hex nuts are reused during installation.
The manual does not specify vehicle make, model, or year. Contact Aries Automotive at 877.287.8634 or visit ariesautomotive.com to confirm fitment for your specific vehicle before purchasing.
The manual specifies that a hacksaw blade or utility knife is required to cut the plastic air dam. A torque wrench is recommended to achieve the correct torque specification (M12 bolts: 28 ft.-lbs.). The manual does not list other specific tools required, but standard automotive hand tools (socket set, wrenches, screwdrivers) are typically needed.
Yes. The manual states 'Assistance is recommended to avoid possible injury or damage to the vehicle.' This is particularly important when positioning the grille guard up to the mounting brackets in Step 8.
The manual does not mention disconnecting the battery. No electrical work is involved in this installation.
No drilling is required. The installation uses factory bumper bolts and frame extension hex nuts. However, cutting of the plastic air dam is required using a hacksaw blade or utility knife to create openings for the lower mounting brackets.
Cutting the plastic air dam is permanent. The manual states that the plastic bumper cover cannot be reinstalled after removal. All other modifications (removal of outer bumper bolts, frame extension nuts) are reversible.
Mark the location of the lower mounting brackets on the top of the air dam while holding it in position (Step 11). Transfer these measurements to the back of the air dam. Verify all measurements on the vehicle before cutting. Use a hacksaw blade or utility knife to carefully cut two openings. For the 'tall' air dam only, do not cut through the top or bottom edge—only remove enough material to clear the brackets. Check fit and trim as necessary. It may be necessary to loosen or temporarily remove the lower mounting brackets to reinstall the air dam.
M12 bolts must be torqued to 28 ft.-lbs. This applies to the 8 hex bolts (M12 × 35 mm) used to attach the grille guard to both the frame brackets and lower mounting brackets.
No. The manual specifies 'Do not tighten hardware at this time' after Steps 2, 6, and 9. Only after leveling and adjusting the grille guard in Step 10 should bracket-to-vehicle hardware be fully tightened. After reinstalling the grille guard in Step 13, level and adjust it again, then fully tighten all hardware.
Spacer plates are placed over the bumper bolt holes to ensure proper clearance between the top and bottom of the frame bracket and the opening in the bumper. The manual states 'Do not install Bracket without Spacer.' One spacer plate is used on each side (driver and passenger).
Plastic retainers (M12) are threaded onto the double bolt plate inside the frame extension before the factory hex nuts are removed. The manual states they are 'designed to help hold the factory double bolt plate in place in the frame and to help with bracket installation' and to prevent the double bolt plate from falling into the frame channel. One retainer is installed on each side (driver and passenger).
No. The manual explicitly states 'Cover cannot be reinstalled.' The plastic cover must be removed to access the outer bumper bolts and cannot be reused.
Remove only the outer bumper bolts on both sides of the tow hook. The manual emphasizes 'Do not remove the inner bumper bolts or the bumper may fall. Only remove the outer bumper bolts.' These factory bolts are then reused to attach the frame brackets to the spacer plates and bumper.
Two factory hex nuts from the frame extension are reused on each side (driver and passenger) to attach the lower mounting brackets to the double bolt plate. The manual specifies removing one nut, installing the plastic retainer, then removing the second nut before reusing both nuts to attach the bracket.
The manual recommends periodic inspections to ensure all hardware is secure and tight. For stainless steel and aluminum components, polish may be used to clear small scratches and scuffs, and mild soap may be used to clean the product.
Yes. Do not remove inner bumper bolts or the bumper may fall. Do not allow the double bolt plate to fall into the frame channel. On the 'tall' air dam only, do not cut through the top or bottom edge. Assistance is recommended to avoid possible injury or damage to the vehicle. Periodic inspections are required to ensure all hardware remains secure and tight.
The manual does not specify vehicle make, model, or year. Contact Aries Automotive at 877.287.8634 or ariesautomotive.com to confirm fitment.
Yes, assistance is recommended to avoid possible injury or damage to the vehicle, particularly when positioning the grille guard.
Torque M12 bolts to 28 ft.-lbs. This applies to all 8 hex bolts (M12 × 35 mm) that attach the grille guard to the frame and lower mounting brackets.
No. Leave hardware loose until the grille guard is leveled and adjusted. Only then fully tighten bracket-to-vehicle hardware, then reinstall and level the grille guard again before final tightening.
Yes. You must cut two openings in the plastic air dam using a hacksaw blade or utility knife to clear the lower mounting brackets. Measure carefully before cutting, and do not cut through the top or bottom edge of a 'tall' air dam.
Do not remove the inner bumper bolts or the bumper may fall. Remove only the outer bumper bolts. Also, do not allow the double bolt plate to fall into the frame channel when removing factory nuts.
On Sale Today
Original price was $1,480.95. Current price is $870.00.You save $610.95 (41%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Wed, Sep 23 - Fri, Sep 25
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
