Loading...

Trailer Axle Part Finder

Answer three questions about your trailer and get the exact Lippert parts that fit it — brakes, hubs, bearings and seals at the wheel end, springs, equalizers, shackles and hangers underneath — priced and ready to add to your cart.

Change axle layout
Your suspension
Springs
Double-eye
Axle rating
2,200 lb
Spring width
1-3/4"
Axles
Tandem
Axle spacing
35"
Axle tube
1-3/4"

Springs and equalizers come one at a time. A tandem trailer takes four springs and two equalizers, one of each per side per axle. Replace them in pairs across the axle even when only one has sagged, or the trailer will sit crooked.

Leaf springsAround 1,100 lb per spring

Measure the spring before ordering. Measure eye centre to eye centre with the spring unloaded, and count the leaves. Two springs of the same rating can differ by three inches.

Lippert 21" Leaf Spring Loaded Length - 1,000 lbs. 127094
1,000 lb · 3 leaves · 20-3/8"1-3/4" wide · 2-7/8" arch unloaded, 2-1/8" loaded · 9/16" eye · industry 72-17
127094$42.99
Lippert 24" Leaf Spring Loaded Length - 1,250 lbs. 127103
1,250 lb · 3 leaves · 23-1/8"1-3/4" wide · 3-1/2" arch unloaded, 2-1/2" loaded · 9/16" eye · industry 72-06
127103$62.99
Lippert Replacement Trailer Leaf Spring - 21", 1,400-lb. Weight Capacity 125269
1,400 lb · 4 leaves · 20-1/2"1-3/4" wide · 3-1/2" arch unloaded, 2-3/8" loaded · 9/16" eye · industry 72-13
125269$54.99

EqualizersTwo axles

Lippert Equalizer - Long Curved (EQ-E1) 122106
Equalizer — 35" spacing, 7-3/4" x 2-7/8"1-3/4" springs · industry EQ-E1
122106$24.32

Complete suspension kitsEqualizers and all the attaching hardware

Lippert Tandem Axle AP Kit with Wet Bolts (Long Links) - No Equalizer 156767
Tandem kit — 33" or 35" spacing1-3/4" double-eye springs · 2,200–8,000 lb axles
156767$153.99
Tandem kit — 35" spacing — EQ-E11-3/4" double-eye springs · 2,200–8,000 lb axles

Shackles and bushings1-3/4" double-eye springs

Lippert 2024120104 Shackle Links, 0.224" Thickness, 2-1/4" Center-to-Center, 4 Pack
Shackle links — 2-1/4" centres, 0.224" thickConnects the spring to the rear hanger or equalizer
4-pack2024120104$38.99
10-pack2025027382$35.99
Lippert 2024120105 Shackle Links, 0.224" Thickness, 3-1/8" Center-to-Center, 4 Pack
Shackle links — 3-1/8" centres, 0.224" thickConnects the spring to the rear hanger or equalizer
4-pack2024120105$38.99
10-pack2025027383$37.99
Lippert 2024120108 Shackle Links, 1/2" Thickness, 2-1/4" Center-to-Center, 4 Pack
Shackle links — 2-1/4" centres, 1/2" thickConnects the spring to the rear hanger or equalizer
4-pack2024120108$67.99
10-pack2025027384$154.99
Lippert 2024120109 Shackle Links, 1/2" Thickness, 3-1/8" Center-to-Center, 4 Pack
Shackle links — 3-1/8" centres, 1/2" thickConnects the spring to the rear hanger or equalizer
4-pack2024120109$69.99
10-pack2025027385$140.99
Lippert Shackle Link Assembly - 2.25" 125675
Shackle link assembly — 2-1/4" centres, 0.224" thickBrown box, sold singly
125675$21.53
Lippert Shackle Link Assembly - 3.13" 133485
Shackle link assembly — 3-1/8" centres, 0.224" thickBrown box, sold singly
133485$33.99
Lippert Heavy Duty Shackle Link Assembly (Wet Bolts) -2.25 126205
Shackle link assembly — 2-1/4" centres, 1/2" thickBrown box, sold singly
126205$45.99
Lippert Heavy Duty Shackle Link Assembly (Wet Bolts) -3.13 156766
Shackle link assembly — 3-1/8" centres, 1/2" thickBrown box, sold singly
156766$45.99
Lippert 2025009017 Bronze Trailer Leaf Spring Bushing, 1-3/4" Length, 9/16" Inside Diameter, 4 Pack
Spring eye bushings — bronze9/16" ID x 11/16" OD x 1-3/4" — wears better than nylon on a greased wet bolt
4-pack2025009017$42.99
8-pack2025009018$52.99
Lippert 2024110549 Nylon Trailer Leaf Spring Bushing, 1-3/4" Length, 9/16" Inside Diameter, 4 Pack
Spring eye bushings — nylonWhat double-eye springs ship with
4-pack2024110549$36.99
8-pack2024110550$37.99

Hangers2,200 – 8,000 lb · 1/4" steel, welded to the frame

Pick by the height you need. Double-eye hangers vary only by how far the hole sits below the frame. Measure the one coming off before ordering.

Hanger — 1-1/4" to hole1-1/4" to hole · 1-15/16" long · 2" wide · 9/16" hole
Hanger — 2-1/4" to hole2-1/4" to hole · 2-15/16" long · 2" wide · 9/16" hole
Hanger — 3-1/4" to hole3-1/4" to hole · 3-1/16" long · 2" wide · 9/16" hole
Hanger — 4-1/4" to hole4-1/4" to hole · 4-15/16" long · 2" wide · 9/16" hole
Hanger — 5" to hole5" to hole · 5-5/8" long · 2" wide · 9/16" hole
Lippert Boot Axle Hanger - 5.81" 102906
Hanger — 3" and 5" to hole3" and 5" to hole · 5" long · 2" wide · 9/16" hole
102906$23.70

Suspension bolts and nutsTen-packs unless marked

Lippert 2024120106 Suspension Shoulder Bolt, 9/16" Diameter, 2-5/16" Shoulder Length
Shoulder bolt — 9/16" x 2-5/16"7/16"-20 thread
4-pack2024120106$45.99
10-pack2025027751$41.99
nut2025027783
Lippert 2025027731 Trailer Suspension Shoulder Bolt, 9/16" Diameter, 7/16"-20 Thread Size, 2-13/16" Length, 10 Pack
Shoulder bolt — 9/16" x 2-13/16"7/16"-20 thread
4-pack202504736610-pack2025027731$42.99
nut2025027783
Lippert 2024120107 Suspension Wet Bolt, 9/16" Diameter, 2-5/16" Shoulder Length
Wet bolt — 9/16" x 2-5/16"7/16"-20 thread · grease zerk for lubricating the bushing in place
4-pack2024120107$48.99
10-pack2025027733$52.99
nut2025027783
Lippert 2024120110 Suspension Wet Bolt, 9/16" Diameter, 2-13/16" Shoulder Length, 4 Pack
Wet bolt — 9/16" x 2-13/16"7/16"-20 thread · grease zerk for lubricating the bushing in place
4-pack2024120110$52.99
10-pack2025027732$62.99
nut2025027783
Lippert 2025047553 Trailer Suspension Hex Bolt, 9/16" Diameter, 9/16"-18 Thread Size, 3-1/2" Length, 10 Pack
Hex bolt — 9/16" x 3-1/2"9/16"-18 thread
10-pack2025047553$41.99
nut2025047552$33.99
Lippert 2025027802 Grease Zerk for Wet Bolt Equalizers & Lubricated Axles, 10 Pack
Grease zerk (10-pack)Replacements for wet bolts and Super-Lube spindles
2025027802$33.99

Mounting the axle to the springs1-3/4" axle tube

Lippert 2024117444 Trailer Axle U-Bolt & Nut Kit, 3/8"-24 x 4.38", 1.75" Tube
U-bolt and nut kitFits a 1-3/4" tube — two U-bolts and four nuts, enough for one side
2024117444$38.99
Lippert Axle Mounting Kit - 1.75" Tube 297426
U-bolt mounting kitFour U-bolts, two tie plates and eight nuts — a whole axle
297426$43.99

No bolt-on shock kit for this tube. Lippert lists shock kits for 2-3/8" and 3" axle tubes only, and yours is 1-3/4". The single shocks below fit any tube once you have mounts on the trailer.

Lippert Heavy-Duty Replacement Shock - Yellow 283280
Heavy-duty shock (yellow)8-5/8" compressed, 13-1/2" extended · four top plates, bushings and nuts
283280$80.11
Lippert Standard Replacement Shock - Black 283271
Standard shock (black)7-1/2" compressed, 12" extended · four top plates, bushings and nuts
283271$67.13

Braking and tyre safetyFits any spring suspension

Lippert Trailer Anti-Lock Braking System (ABS) 2021017577
Anti-lock braking systemTwo to six wheels, one to three axles · works with electromagnetic drum brakes and a 7-way connector, with or without a brake controller
Lippert Tire Linc Auto Advanced TPMS Tire Pressure Monitoring System 57009
Tire Linc pressure and temperature monitoringRepeater, four sensors and hardware — pushes a warning to your phone before a hot tyre lets go
57009$379.95
Lippert Tire Linc Auto TPMS Add-on Sensors 2-Pack 57011
Tire Linc extra sensorsAdds two, up to twenty tyres
57011$120.95
Start over

Part numbers come from the Lippert Premium Axle Parts catalog (2025048298-RA). Lippert axle components are universally compatible with Dexter. A part number shown in a dashed outline is one we don't stock — the link searches the catalogue for an equivalent. Industry numbers are printed for reference only and cannot be ordered against. Always confirm against the parts on your trailer before ordering, since mixed and previously repaired axles are common. Need a hand? Call 888-634-9494.