Trailer Axle Part Finder
Answer three questions about your trailer and get the exact Lippert parts that fit it — brakes, hubs, bearings and seals at the wheel end, springs, equalizers, shackles and hangers underneath — priced and ready to add to your cart.
- Springs
- Double-eye
- Axle rating
- 5,200 lb
- Spring width
- 1-3/4"
- Axles
- Tandem
- Axle spacing
- 35"
- Axle tube
- 3"
Springs and equalizers come one at a time. A tandem trailer takes four springs and two equalizers, one of each per side per axle. Replace them in pairs across the axle even when only one has sagged, or the trailer will sit crooked.
Leaf springsAround 2,600 lb per spring
Measure the spring before ordering. Measure eye centre to eye centre with the spring unloaded, and count the leaves. Two springs of the same rating can differ by three inches.
EqualizersTwo axles
Complete suspension kitsEqualizers and all the attaching hardware
Shackles and bushings1-3/4" double-eye springs
Hangers2,200 – 8,000 lb · 1/4" steel, welded to the frame
Pick by the height you need. Double-eye hangers vary only by how far the hole sits below the frame. Measure the one coming off before ordering.
Suspension bolts and nutsTen-packs unless marked
Mounting the axle to the springs3" axle tube
Braking and tyre safetyFits any spring suspension
Part numbers come from the Lippert Premium Axle Parts catalog (2025048298-RA). Lippert axle components are universally compatible with Dexter. A part number shown in a dashed outline is one we don't stock — the link searches the catalogue for an equivalent. Industry numbers are printed for reference only and cannot be ordered against. Always confirm against the parts on your trailer before ordering, since mixed and previously repaired axles are common. Need a hand? Call 888-634-9494.