Our in-house experts typically reply within one business day.
Bak Industries
Verify Fitment
Select your vehicle to confirm this part fits.
2007, 2009 - 2012, 2014 - 2016, 2018, 2020 Toyota Tundra
Confirmed to Fit
2021 Toyota Tundra
Confirmed to Fit
2008, 2013, 2017, 2019 Toyota Tundra
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
The Revolver X2 hard rolling truck bed cover features exclusive automatic rotational locking rails that secure the cover the entire length of the bed on each side. This hard aluminum roll-up cover easily rolls up with one-handed operation and allows use of every inch of the truck bed without blocking your rear window. This cover does it all with unrivaled strength, security and style.
Actual Color: Black
Cargo Management System: With Cargo Management System
Color: Black
Finish: Leather Grain
Front Opening: No
Full Bed Access: Yes
Install Time: 30 Minutes
Key Lockable: No
Low Profile: Yes
Material: Vinyl Top w/ Aluminum Underside
Paintable: No
Rails To Install: Yes
Sits on Truck Rails: No
Style: Roll-Up Hard Cover
Title: BAK RX2 07-21Tun5'6wDRS 39409T
Works w/Toolbox: No
BAK Industries is a leading manufacturer of premium hard-folding and hard-rolling truck bed covers. Known for popular products such as the BAKFlip and Revolver, BAK tonneau covers deliver secure cargo protection, convenient bed access, and a sleek, low-profile appearance.
BAK Industries is a trusted manufacturer of premium tonneau covers designed to improve truck bed security, protection, and versatility. The brand specializes in hard-folding and hard-rolling truck bed covers that combine durable construction with a clean, low-profile appearance.
BAK’s product lineup includes the popular BAKFlip series of hard-folding covers and the Revolver series of hard roll-up covers. Available models include the BAKFlip MX4, G2, F1, FiberMax, and BAK Revolver X4s and X2. Select models are also available with integrated T-slot rails for mounting compatible racks and cargo-management accessories.
BAK tonneau covers are manufactured from durable materials such as aluminum, fiberglass-reinforced polymer, and aluminum with a vinyl-grain surface. Many models provide convenient access to the truck bed while helping shield tools, equipment, luggage, and other cargo from weather and unauthorized access.
Designed for work trucks, daily drivers, and recreational vehicles, BAK truck bed covers offer practical functionality without sacrificing appearance. With vehicle-specific designs and straightforward installation, BAK Industries provides dependable cargo-management solutions for a wide variety of pickup trucks.
Experts available to answer your questions
Call 888-634-94943 Year Limited
3 compatible vehicles
| Year | Make & Model | Bed | Notes |
|---|---|---|---|
| 2007, 2009 - 2012, 2014 - 2016, 2018, 2020 | Toyota Tundra | 5'7" Bed | Cargo Management System: With Deck Rail System Revolver X2 |
| 2021 | Toyota Tundra | 5'7" Bed | Cargo Management System: With Deck Rail System Revolver X2 Trail Special Edition Storage Boxes: Without Trail Special Edition Storage Boxes |
| 2008, 2013, 2017, 2019 | Toyota Tundra | 5'7" Bed | Revolver X2 Cargo Management System: With Deck Rail System |
The BAK Revolver Roll-Up Hard Cover X2 07-21 Tundra 5'6" w/ Deck Rail Sys w/o Trail Special Edition StrgBxs 39409T (Part #BKDA39409T) fits the following vehicles: 2007-2021 Toyota Tundra. Always verify your specific year, make, and model before ordering.
The BAK Revolver Roll-Up Hard Cover X2 07-21 Tundra 5'6" w/ Deck Rail Sys w/o Trail Special Edition StrgBxs 39409T (Part #BKDA39409T) fits 2007-2021 Toyota Tundra models. The 2021 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the BAK Revolver Roll-Up Hard Cover X2 07-21 Tundra 5'6" w/ Deck Rail Sys w/o Trail Special Edition StrgBxs 39409T (Part #BKDA39409T) is designed to fit the 2007-2021 Toyota Tundra.
The BAK Revolver Roll-Up Hard Cover X2 07-21 Tundra 5'6" w/ Deck Rail Sys w/o Trail Special Edition StrgBxs 39409T (Part #BKDA39409T) is designed for 5'7" bed trucks. Check the fitment chart for your specific Toyota Tundra configuration.
The BAK Revolver Roll-Up Hard Cover X2 07-21 Tundra 5'6" w/ Deck Rail Sys w/o Trail Special Edition StrgBxs 39409T (Part #BKDA39409T) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
No. This is a supplemental installation sheet for Toyota Tundra trucks equipped with a factory track system. The Revolver rail is designed to work with and mount into the original factory track system mounting holes. If your truck does not have a factory track system, this product is not compatible.
The Revolver X2 rail fits Toyota Tundra trucks with either a 5'6" bed or 6'6" bed. The number of S clamps supplied differs by bed length: 5 clamps for a 5'6" bed and 6 clamps for a 6'6" bed.
Yes, the Revolver X2 rail can be installed on a Tundra with a drop-in bed liner. However, you must use a 1/4" bulkhead seal instead of the standard 3/4" seal, and you must remove the foam pad located on the end of the slotted bracket before installation.
The kit includes: S clamps (5 for a 5'6" bed or 6 for a 6'6" bed), supplied Torx screws for mounting the rail to the factory holes, a bulkhead seal (3/4" for trucks without a drop-in bed liner, or 1/4" for trucks with one), a slotted bracket with a foam pad, a buckle strap bracket, and an end cap. The factory track system hardware is reused during remounting.
Yes. The first step is to remove the factory installed accessory track system and set it aside. You will remount it later using the original hardware into the threaded holes at the bottom of the S clamps.
Position the rail with the silver slotted bracket all the way forward, towards the cab at the front of the vehicle. Align the rail with the front/cab bulkhead. The S clamps must be aligned to match the spacing of the original factory track system mounting holes before tightening the Torx screws.
1. Remove and set aside the factory track system. 2. Install the bulkhead seal to the top of the bulkhead at the edge of the bed opening (use 3/4" seal without a drop-in liner, or 1/4" seal with one). 3. Slide the S clamps into the corresponding slots in the Revolver rail. 4. Align the S clamps to match the original factory track mounting hole spacing. 5. Mount the rail into the original factory holes using supplied Torx screws through the middle slot of the S clamps, with the silver slotted bracket positioned forward toward the cab. 6. Remount the factory track system using original hardware into the threaded holes at the bottom of the S clamps. 7. Remove the end cap from the factory track system, slide the buckle strap bracket into the rail, and replace the end cap. 8. Mount the strap clamp as far forward on the rail as possible and tighten on both sides.
Only if your truck is equipped with a drop-in bed liner. If you have a drop-in bed liner, remove the foam pad located on the end of the slotted bracket before installation. If your truck does not have a drop-in bed liner, leave the foam pad in place.
Remount the factory track system using the original hardware into the threaded holes at the bottom of the S clamps. The factory hardware is reused; no new fasteners are required for this step.
Remove the end cap from the factory accessory track system. Slide the buckle strap bracket into the rail. Replace the end cap. Then mount the strap clamp as far forward on the rail as possible and tighten. Repeat on the opposite side.
The Revolver X2 (part 318A0049) fits Toyota Tundra trucks with a factory track system and either a 5'6" or 6'6" bed. If your truck does not have a factory track system, this product is not compatible.
The kit includes supplied Torx screws for mounting the rail to the factory holes. The factory track system hardware is reused for remounting. No additional fasteners are required.
Yes. Remove the factory track system first and set it aside. You will remount it after installing the Revolver rail using the original hardware.
Use a 3/4" bulkhead seal if your truck does not have a drop-in bed liner. Use a 1/4" bulkhead seal if your truck has a drop-in bed liner. You must also remove the foam pad from the slotted bracket if you have a drop-in liner.
Position the silver slotted bracket all the way forward, towards the cab at the front of the vehicle. Align the rail with the front/cab bulkhead.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sun, Sep 20
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.