Our in-house experts typically reply within one business day.
Bulldog
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Complete kit bundle containing all necessary components for your project. Professional-grade components designed for reliable performance and long-lasting durability.
This Bulldog 48 In. tall farm jack is designed to lift heavy loads and equipment. It is the perfect tool for tearing out stubborn stumps or pulling fence posts and poles. It also serves as an all-purpose hoist or winch. The dependable, rugged ratchet design has a durable, solid steel construction.
| BRAND: | BULLDOG |
| PART NUMBER: | 7033500 |
| WARRANTY: | LIMITED 1 YEAR WARRANTY |
| WEIGHT: | 29.26 LBS |
| CAPACITY: | 8,000 LBS. |
| TRAVEL: | 42 IN. |
| HANDLE LENGTH: | 36 IN. |
| FOOT PLATE SIZE: | 4.6 IN. X 7 IN. |
Keywords: BD7033500-2PK bundle kit, complete kit, professional components, industrial kit, BD7033500, BULLDOG
Founded in 1920, Bulldog has become the standard for heavy-duty trailer connection hardware in agricultural, military and utility service. The line covers gooseneck hitches and couplers, A-frame and channel-mount trailer couplers with the Wedge-Latch mechanism, and heavy-duty jacks, built for unmatched strength, reliability and safety under demanding loads.
Bulldog was founded in 1920 and has spent more than a century supplying the connection hardware that heavy trailers depend on. Its market has always been the demanding end: agricultural, military and utility applications where a coupler failure is not an inconvenience but a serious incident. The brand summarises its position as Tough and Tested, and it sits within the Horizon Global towing group alongside Reese, Draw-Tite, Fulton, Tekonsha, Bargman and Wesbar.
Gooseneck equipment is the brand's signature. Gooseneck hitches mount in the truck bed over the rear axle, which places the load where the chassis can carry it properly and allows far tighter turning than a receiver hitch permits. Matching gooseneck couplers attach at the trailer end, in round tube and square configurations across the capacity range used by livestock, equipment and flatbed trailers.
The conventional trailer coupler range is built around the Wedge-Latch mechanism, which uses a wedge to take up wear between coupler and ball rather than relying on a fixed clamp that loosens over time. That matters on a trailer accumulating hard miles, where slack in the coupling shows up as noise and shock loading. Couplers are offered in A-frame form for standard tongues and in channel-mount form for straight tongue and fabricated frames, with adjustable channel versions that let a coupler be positioned to suit the tongue height.
Heavy-duty jacks complete the line, sized for the tongue weights that gooseneck and equipment trailers generate. Across the range the emphasis is consistent: forged and heavy-section components, load ratings backed by testing, and hardware specified for agricultural, military and heavy-duty commercial use rather than occasional recreational towing.
Experts available to answer your questions
Call 888-634-94943 Years
The Farm Jack is a manual hydraulic lifting and lowering device manufactured by Horizon Global Americas Inc. It is designed to lift and lower stationary loads, and can also be used as a winch or clamp. It comes in three sizes: 24", 32", and 42" models (part numbers N7033500, N7033600, and N7033700 respectively). The jack operates using a hand-operated lever mechanism with climbing pins that engage in holes along the steel bar frame.
The Farm Jack is available in three sizes: 24" (part number N7033500), 32" (part number N7033600), and 42" (part number N7033700). Each size is designed for different lifting applications.
The manual states that you must never exceed the maximum rated capacity. The specific capacity value should be obtained from the stamped markings or decals on the product itself. If you are uncertain about the capacity before using the product, contact Horizon Global at the technical support number provided or visit www.horizonglobal.com.
No. The operator and bystanders must never position any part of their body under any portion of the product or the load being supported. Never put your body under raised loads without properly immobilizing and supporting the load. Failure to follow this instruction may result in serious bodily injury or death.
No. The jack, while standing vertical and unsupported, may tip over and cause serious bodily injury or death. Always support the jack or lay it on its side when not in use. Use the optional foot plate included to stabilize the jack base as needed.
No. Do not allow children to play on or around the product or the load being supported. This is a serious safety hazard.
Inspect the jack carefully before each use. Check the climbing pins for damage and wear. Make sure the steel bar frame is straight and nothing is blocking the steel bar frame holes. Ensure the jack is properly lubricated. Do not use the jack if it is damaged, worn, or out of alignment.
Lubricate the jack with a light penetrating oil or a Teflon or silicone spray at the locations shown in the manual. These locations include both climbing pins and associated springs, the shear pin in the handle pin, and the front and back edges of the steel bar frame. The jack is not self-lubricating and must be inspected and lubricated before use.
Yes. The jack can be cleaned with water and a mild detergent if needed. After cleaning, dry and lubricate immediately.
Binding of the climbing pins may be due to dirt, corrosion, or a worn or bent steel bar frame. If binding occurs, clean and lubricate the jack. Test the jack by raising it without a load. If binding continues, do not use the jack.
Place the base plate of the jack on a firm, level, and dry surface with the steel bar frame in a vertical position. Use the optional foot plate included to stabilize the jack base as needed.
1. Immobilize and stabilize the load to prevent it from rolling or shifting. 2. Place the base plate on a firm, level, dry surface with the steel bar frame vertical. 3. With the handle vertical and clipped to the steel bar frame, pull the reversing latch into the raise position until it locks. 4. Pull the handle away from the steel bar frame. 5. Using the handle, raise the lifting mechanism until the lower clamp is securely under the load. 6. While grasping the handle firmly with both hands, carefully move the handle up and down. As you push down, the upper climbing pin will disengage and engage in the next hole above. As you raise the handle, the lower climbing pin repeats this process. The load is lifted on each downstroke of the handle. 7. Maintain controlled grip of the handle throughout the entire handle stroke. 8. While raising the load, ensure it remains stabilized and the jack remains secure and vertical. 9. When the load reaches the desired height, secure the handle in the vertical position by clipping it to the steel bar frame. 10. Stabilize and immobilize the load before lowering it onto any stabilizing blocks.
1. The jack must have a load of 500 lbs or greater before it can be lowered, or else the lifting mechanism will slide down the steel bar frame to the base plate. 2. Position the jack under the load and raise the load as described in the raising instructions to remove any blocks holding the load up. 3. Place the handle in the vertical position, clipped against the steel bar frame before attempting to lower the load. 4. Shift the reversing latch to the lower position. 5. While grasping the handle with both hands, carefully move the handle up and down. The load will be lowered on each upstroke of the handle. 6. Maintain controlled grip of the handle throughout the entire handle stroke.
The reversing latch is a mechanism on the Farm Jack that switches between raise and lower modes. To raise a load, pull the reversing latch into the raise position until it locks. To lower a load, shift the reversing latch to the lower position. The handle may move rapidly when shifting the reverse latch, so ensure the handle is latched in the upright position against the steel bar frame and securely hold the bar in position when making this change.
No. Do not use the jack on curved or tubular surfaces. The load may slip off, causing serious bodily injury or death.
Yes, the Farm Jack can be used as a winch. When using the jack as a winch, always use chains or tow straps that have a greater working strength capacity than the jack. Loosen the top clamp bolt and rotate the clamp so it is in-line with the steel bar frame, then retighten the bolt to ft-lbs. Attach one end of the chain or tow strap securely to the load. Attach the other end securely to the top clamp opening. It is recommended to use a shackle (not included) for attachment. Attach another chain or tow strap securely to a fixed object. Attach the other end securely to the lower clamp. It is recommended to use a shackle (not included) for attachment. Operate the jack as if it were being used to raise a load. Do not exceed the maximum load of lbs.
When using the jack as a winch, do not exceed the maximum load. The manual does not specify the exact load value, but it should be obtained from the stamped markings or decals on the product.
When using the jack for clamping, do not exceed the maximum clamping force of lbs. If you exceed this limit, the top clamp could bend or break, resulting in serious bodily injury or death.
1. The top clamp must be positioned perpendicular to the steel bar frame. 2. The top clamp can be moved to any position along the steel bar frame. To reposition it, remove the top clamp bolt and reposition the top clamp to a new hole position on the steel bar frame. Retighten the bolt to ft-lbs. 3. Operate the jack as if it were being used to raise a load, clamping material between the top and lower clamps. 4. Do not exceed the maximum clamping force of lbs.
Retighten the top clamp bolt to ft-lbs. This applies both when rotating the clamp for winch use and when repositioning the clamp for clamping use.
During lifting and lowering, the load pushes up against the jack handle. If your hand slips, the jack handle may move rapidly or unexpectedly. Always keep your head and body out of the handle path of movement. If any part of your body is in the path of the handle, it may strike you and result in serious injury or death. Maintain a controlled grip of the handle through the entire handle stroke.
No. Never attempt to raise more than one tire at a time. Never raise an inflated tire more than 6 inches above the ground. Failure to follow these instructions may result in serious bodily injury or death.
When using the jack as a winch, ensure that the tow straps or chains being used have a greater strength capacity than the jack. The tow strap or chain may break while winching, which could cause the load to move or the chain or tow strap to snap back, causing serious injury or death. Always use equipment with adequate capacity and maintain control of the operation.
When using the jack as a winch, the top clamp will support up to lbs. Exceeding this limit will result in the top clamp bending or breaking, causing the load to move or the chain or tow strap to snap back, causing serious injury or death.
No. Never perform maintenance on the jack while it is under load.
Horizon Global Americas Inc. warrants the product to the original consumer purchaser only against material and workmanship defects for a period of 1 year, excluding normal wear and tear. The warranty is valid only if the products are returned for inspection and testing, and if the inspection discloses that any alleged non-conformity is material and has not been caused by misuse, neglect, wear and tear, improper installation, unsuitable storage, improper repair, alteration, or accident, and if the products were installed, maintained, and used in accordance with the instructions. Product replacement is the sole and exclusive remedy under this warranty. The warranty does not cover service or labor charges incurred in removing or replacing a product. Horizon Global will not be liable for any indirect, special, consequential, or punitive damages. For warranty claims, contact Horizon Global at the address provided and identify the product by model number.
The Farm Jack is available in three sizes: 24" (N7033500), 32" (N7033600), and 42" (N7033700).
The jack must have a load of 500 lbs or greater before it can be lowered. If the load is less than 500 lbs, the lifting mechanism will slide down the steel bar frame to the base plate.
Yes. Before every use, inspect the jack for missing or damaged components and ensure that the jack is clean and lubricated. The jack is not self-lubricating and will not operate safely without proper lubrication.
Place the jack on a firm, level, and dry surface. Do not use the jack on curved or tubular surfaces, as the load may slip off.
Yes. The Farm Jack can be used as a winch or clamp by repositioning the top clamp and following the specific operating instructions for each mode. When used as a winch, use chains or tow straps with greater strength capacity than the jack.
Binding of the climbing pins may be caused by dirt, corrosion, or a worn or bent steel bar frame. To fix this: 1. Clean the jack thoroughly. 2. Lubricate the jack with a light penetrating oil or Teflon/silicone spray at all specified locations (climbing pins, springs, shear pin, and frame edges). 3. Test the jack by raising it without a load. If binding continues after cleaning and lubricating, do not use the jack.
The jack must have a load of 500 lbs or greater before it can be lowered. If the load is less than 500 lbs, the lifting mechanism will slide down the steel bar frame to the base plate. Ensure the load meets the minimum weight requirement before attempting to lower it.
Poor performance may be caused by inadequate lubrication. Before every use, inspect the jack and lubricate it with a light penetrating oil or Teflon/silicone spray at all specified locations: both climbing pins and associated springs, the shear pin in the handle pin, and the front and back edges of the steel bar frame. The jack is not self-lubricating and will not operate safely or effectively without proper lubrication.
On Sale Today
Original price was $414.16. Current price is $261.48.You save $152.68 (37%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Oct 26 - Thu, Oct 29
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
