Our in-house experts typically reply within one business day.
Reese Towpower
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2009 Chrysler Aspen
Confirmed to Fit
1997 - 2010 Dodge Dakota
Confirmed to Fit
1998 - 2009 Dodge Durango
Confirmed to Fit
1995 - 2009 Dodge Ram 1500
Confirmed to Fit
1995 - 2009 Dodge Ram 2500
Confirmed to Fit
1995 - 2009 Dodge Ram 3500
Confirmed to Fit
2011 Ram Dakota
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| BRAND: | REESE TOWPOWER |
| PART NUMBER: | 7805111 |
| WARRANTY: | LIMITED 1 YEAR WARRANTY |
| WEIGHT: | 0.3 LBS |
| WIRE COLORS: | BLACK, RED, BLUE WHITE |
| CONNECTOR GENDER: | MALE |
| CONNECTOR SHAPE: | RECTANGLE |
| CONNECTOR QUANTITY: | 2 |
| TERMINAL QUANTITY: | 4 |
| TERMINAL TYPE: | BLADE |
Reese Towpower delivers the towing hardware most drivers reach for: receiver hitches across multiple classes, ball mounts, hitch balls, pins, clips, safety chains, wiring and hitch accessories. Backed by a towing pedigree dating to 1952, the line uses all-welded construction and corrosion-resistant finishes, with custom-fit hitches matched to vehicle make, model and year.
The Reese story starts in 1952, when Margaret Reese challenged her husband TJ to do something about travel trailers rocking whenever anyone walked through them. A few years later he built the first pair of stabilising jacks. The idea was simple and it worked, and it changed how the RV industry thought about trailer stability. From that beginning the Reese name grew into a full towing line covering fifth wheel hitches, pin boxes, weight distribution systems and accessories, and Reese Towpower carries that engineering into the products most owners buy off the shelf.
Receiver trailer hitches anchor the range, offered across the classes needed for everything from a small utility trailer to livestock and job-site loads. Construction is all-welded rather than bolted at the stress points, and each hitch is tested against published standards for strength and safety. Custom-fit hitches are engineered to the vehicle manufacturer's weight specifications for a given model and model year, so mounting points line up with existing frame holes and the finished installation sits where it should. Exclusive paint finishes resist rust and corrosion through years of road salt, and hitches carry a nationwide limited lifetime warranty.
No towing setup is complete without the connecting hardware, and Reese Towpower covers it comprehensively. Ball mounts come in fixed, adjustable and specialty forms with a range of rises and drops to level a trailer properly. Hitch balls are offered in the standard diameters and shank sizes, matched to coupler and load rating.
The towing accessories line fills in everything else: hitch pins and clips, locks, receiver tube covers, and safety chains rated to the load being pulled. For most drivers this is where a towing purchase actually begins, and having the whole chain of components from one engineering source keeps ratings consistent end to end.
Experts available to answer your questions
Call 888-634-9494The Reese Towpower Trailer Brake Controller Wiring Harness RT7805111 (Part #RT7805111) fits 2007-2009 Chrysler Aspen models. The 2011 model year is the last year covered by this part number. For newer models, check for an updated version.
7 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2009 | Chrysler Aspen | Trailer Brake Control Harness Uses all existing holes. No Drilling required Install Time is 5 minutes |
| 1997 - 2010 | Dodge Dakota | Trailer Brake Control Harness Uses all existing holes. No Drilling required Install Time is 5 minutes |
| 1998 - 2009 | Dodge Durango | Trailer Brake Control Harness Uses all existing holes. No Drilling required Install Time is 5 minutes |
| 1995 - 2009 | Dodge Ram 1500 | Trailer Brake Control Harness Uses all existing holes. No Drilling required Install Time is 5 minutes |
| 1995 - 2009 | Dodge Ram 2500 | Trailer Brake Control Harness Uses all existing holes. No Drilling required Install Time is 5 minutes |
| 1995 - 2009 | Dodge Ram 3500 | Trailer Brake Control Harness Uses all existing holes. No Drilling required Install Time is 5 minutes |
| 2011 | Ram Dakota | Trailer Brake Control Harness Uses all existing holes. No Drilling required Install Time is 5 minutes |
Yes, the Reese Towpower Trailer Brake Controller Wiring Harness RT7805111 (Part #RT7805111) is designed to fit the 2007-2009 Chrysler Aspen.
The Reese Towpower Trailer Brake Controller Wiring Harness RT7805111 (Part #RT7805111) fits the following vehicles: 2007-2009 Chrysler Aspen; 1997-2010 Dodge Dakota; 1998-2009 Dodge Durango; 1995-2009 Dodge Ram 1500; 1995-2009 Dodge Ram 2500; 1995-2009 Dodge Ram 3500; 2011 Ram Dakota. Always verify your specific year, make, and model before ordering.
The Reese Towpower Trailer Brake Controller Wiring Harness RT7805111 (Part #RT7805111) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
On Sale Today
Original price was $22.50. Current price is $15.06.You save $7.44 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 16 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
